• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10B
• /
• pp.1824-1831
• /
• 1999

In this paper, the data recovery performance of systematic erasure codes in burst loss environments is analyzed and the estimation method of redundant data according to loss characteristics is suggested. The burstness of packet loss is modeled by Gilbert model, and the performance of proposed packet loss recovery method in the case of using systematic erasure code is analyzed based on previous study on the loss recovery in the case of using erasure code. The required redundancy data fitting method for systematic erasure code in the condition of given loss property is suggested in the consideration of packet loss characteristics such as average packet loss rate and average loss length.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.05a
• /
• pp.126-130
• /
• 1999

In packet CDMA networks, it is important to design a MAC protocol that meets the QoS requirements , of the different traffic types and allocates the radio channels efficiently. In this paper, a RRS$^2$-CDMA MAC protocol is proposed for integrating voice and data services in the microcellular packet CDMA networks. In PRS$^2$-CDMA, a voice terminal can resolve a spreading code to transmit voice packets during a talkspurt while a data terminal has to contend for a code for each packet transmission. The numerical results show that the proposed protocol can improve the system capacity, while guaranteeing the QoS of voice and data services.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.3
• /
• pp.1377-1399
• /
• 2020

In search and rescue mission, micro aerial vehicles (MAVs) are typically used to capture image and video from an aerial perspective and transfer the data to the ground station. Because of the power limitation, a cluster of MAVs are required for a large search area, hence an ad-hoc wireless network must be maintained to transfer data more conveniently and fast. However, the unstable link and the intermittent connectivity between the MAVs caused by MAVs' movement may challenge the packet forwarding. This paper proposes a delay tolerant packet forwarding algorithm based on location estimation for MAV networks, called DTN_est algorithm. In the algorithm, ferrying MAVs are used to transmit data between MAVs and the ground station, and the locations of both searching MAVs and ferrying MAVs are estimated to compute the distances between the MAVs and destination. The MAV that is closest to the destination is selected greedy to forward packet. If a MAV cannot find the next hop MAV using the greedy strategy, the packets will be stored and re-forwarded once again in the next time slot. The experiment results show that the proposed DTN_est algorithm outperforms the typical DTN_geo algorithm in terms of packet delivery ratio and average routing hops.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1086-1089
• /
• 2002

In this paper, an adaptive packet acquisition performance of a CDMA/TDD packet radio system is analyzed and simulated in a frequency-selective Rayleigh fading channel. The frequency-selective fading process is assumed to be WSSUS model which is typical for a satellite and a mobile radio communications. The performance is evaluated in terms of packet error probability. In this adaptive packet acquisition scheme, an auxiliary training sequence is placed within data packet to estimate time-varying channel state. From the simulation results, it is confirmed that the proposed acquisition scheme significantly improves packet error performance compared to the conventional fixed acquisition scheme, especially, for the case of low Doppler frequency. The analysis in this paper can be applied to the design of a CDMA/TDD packet radio system.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.29-32
• /
• 2001

This paper has simulated the PER(Packet Error Rate), ratio of received packet and payload BER of Bluetooth system with packet types of ACL(Asynchronous Connection Less) and SCO(Synchronous Connection Oriented) link over wireless Ad-hoc environment. AWGN(Additive White Gaussian Noise) and Rayleigh fading are considered as channel model, and the analysis is based on the baseband model of Bluetooth system. In terms of PER and ratio of received packet, performance of DM1 packet is almost same as those of HV1, HV2 and HV3 packets, the performances of the other packets depend on the packet types. In terms of payload BER performance, there is no difference among HV2 packet of SCO link and DM1, DM3, DM5 packets of ACL link. Moreover, there is no difference among HV3 packet of SCO link and DM1, DM3, DM5 packets of ACL link, too.

• Journal of Digital Convergence
• /
• v.15 no.8
• /
• pp.341-349
• /
• 2017

CCN proposes that intermediate network nodes on a network path for a transmitted data-packet cache the data-packet. If the nodes receive request packets for the cached data, the nodes can directly respond to the request-packets using the cached data. Since a request-packet can be responded by one of the intermediate nodes on a path of the request-packet, both faster response time and decreased data transmission amount are expected comparing to the existing host centric networking. However, CCN is vulnerable against forgery attacks because data-packet receivers cannot identify a data provider. Hence, a data authentication scheme is essentially needed to make CCN more secure. But such a data authentication process is one of the main causes of CCN-based service delays. This paper first analyzes the problems of a CCN data authentication scheme, then proposes an improved authentication operation scheme for efficiently authenticating data, and finally evaluates its performance.

• Journal of Satellite, Information and Communications
• /
• v.3 no.2
• /
• pp.13-17
• /
• 2008

The conventional telemetry system of Korean low-earth orbiting satellites has certain limitations in accommodating various missions. As the payload becomes complex, it requires very complicated operational concepts in terms of telemetry. With the current design, the telemetry formats have to be rebuilt whenever new payloads or operation concepts are involved, and many constraints in operation shall be produced due to the lacks of its flexibility. As the capability and performance of a satellite have been improved, the communication structure of the satellite should be improved to gather more telemetry data. For the efficiency of data handling, it is necessary to change the grid based telemetry system in which the downlink interval and types for telemetry was limited. Comparing the fixed data map such as grid type, the packet based telemetry system can be operated as flexible and various types of packet can be designed such as the dump packet and the event packet. The sequence of the packets can be modified or newly defined to manage the massive satellite state of health data. In this paper, a new strategy for the telemetry development partially derived from PUS (Packet Utilization Standard) of European Space Agency, which provides enhanced features for the accommodation of payloads & operational requirements, is presented.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.1
• /
• pp.15-21
• /
• 2018

Per-packet scheduling is more suitable than per-flow scheduling to reduce the flow completion time by efficiently utilizing resources in data center networks. Recently, many per-packet scheduling schemes utilizing multiple paths have been proposed. However, to mitigate the negative effect of packet reordering on TCP performance, most of the schemes require supplemental measures such as putting packets in order at the lower layer. In this study, we investigate how well DCTCP, which is a representative TCP for data center networks, performs with per-packet scheduling through simulation. Simulation results show that DCTCP keeps the queue length short but that DCTCP shows low fairness due to the way of reducing the congestion window by ECN.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.11S
• /
• pp.3190-3198
• /
• 1999

Because of the rapid growth of the mobile communication, the need for the mobile internet access has grown up as well. since the current mobile communication network, however, is optimized for a voice communication system, which exclusively occupies a channel for a given time, it is not suitable for variable rate packet data. In order to support the mobile internet access, it is essential do design a reasonable packet switching network which supports the mobility. Since mobile packet network has longer latency, high speed switching and QoS are required to meet the user's requirements. In this paper, we suggest an resonable way to construct a network and its operation procedures utilizing GPRS(General Packet Radio Service) network and MPLS(Multi Protocol Label Switching) to provide a high speed switching and QoS mobile internet access. GPRS is used as a network which supports the mobility and MPLS guarantees the QoS and high speed IP protocol transmission based on the ATM switching technology.

• International Journal of Computer Science & Network Security
• /
• v.22 no.7
• /
• pp.91-102
• /
• 2022

With the evolution of wireless sensor network (WSN) technology, the routing policy has foremost importance in the Internet of Things (IoT). A systematic routing policy is one of the primary mechanics to make certain the precise and robust transmission of wireless sensor networks in an energy-efficient manner. In an IoT environment, WSN is utilized for controlling services concerning data like, data gathering, sensing and transmission. With the advantages of IoT potentialities, the traditional routing in a WSN are augmented with decision-making in an energy efficient manner to concur finer optimization. In this paper, we study how to combine IoT-based deep learning classifier with routing called, Kriging Regressive Deep Belief Neural Learning (KR-DBNL) to propose an efficient data packet routing to cope with scalability issues and therefore ensure robust data packet transmission. The KR-DBNL method includes four layers, namely input layer, two hidden layers and one output layer for performing data transmission between source and destination sensor node. Initially, the KR-DBNL method acquires the patient data from different location. Followed by which, the input layer transmits sensor nodes to first hidden layer where analysis of energy consumption, bandwidth consumption and light intensity are made using kriging regression function to perform classification. According to classified results, sensor nodes are classified into higher performance and lower performance sensor nodes. The higher performance sensor nodes are then transmitted to second hidden layer. Here high performance sensor nodes neighbouring sensor with higher signal strength and frequency are selected and sent to the output layer where the actual data packet transmission is performed. Experimental evaluation is carried out on factors such as energy consumption, packet delivery ratio, packet loss rate and end-to-end delay with respect to number of patient data packets and sensor nodes.