• Journal of Multimedia Information System
• /
• 제3권4호
• /
• pp.161-168
• /
• 2016

In this paper, a power flow simulator, which visualizes power flow and system configuration, is proposed and implemented. Generally, it is necessary to prepare a text file with power-system descriptions, which is one of the barriers for power-flow simulations. The proposed simulator has a function of automatic generations of IEEE common data format files from user-drawn power-system diagrams. Therefore, it is possible for users to carry out simulations only by drawing power system on display. In addition, the proposed simulator also has a function that power-system diagram is illustrated automatically from an IEEE common data format file. By using this function, it is possible to visualize amounts and directions of power flows on the bus-system diagram, which helps users to comprehend network dynamics intuitively. Because the proposed simulator allows including renewable-resource generators in power systems, it is useful to evaluate the power distribution system. It is shown in this paper that the proposed simulator can make IEEE common data format files correctly and illustrate intuitive power flow.

• Journal of Mechanical Science and Technology
• /
• 제16권3호
• /
• pp.403-422
• /
• 2002

In this study, six two-phase nonboiling heat transfer correlations obtained from the recommendations of our previous work were assessed. These correlations were modified using seven extensive sets of two-phase flow experimental data available from the literature, for vertical and horizontal tubes and different flow patterns and fluids. A total of 524 data points from five available experimental studies (which included the seven sets of data) were used for improvement of the six identified correlations. Based on the tabulated and graphical results of the comparisons between the predictions of the modified heat transfer correlations and the available experimental data, appropriate improved correlations for different flow patterns, tube orientations, and liquid-gas combinations were recommended.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3021-3026
• /
• 2007

In this paper, experimental data on flow pattern transition of inclination angles from 0-90 are presented. A test section is constructed 2 mm long and I.D 1inch using transparent material. The test section is supported by aluminum frame that can be placed with any arbitrary inclined angles. The air-water two-phase flow is observed at room temperature and atmospheric condition using both high speed camera and void impedance meter. The signal is sampled with sampling rate 1kHz and is analyzed under fully-developed condition. Based on experimental data, flow pattern maps are made for various inclination angles. As increasing the inclination angels from 0 to 90, the flow pattern transitions on the plane jg-jf are changed, such as stratified flow to plug flow or slug flow or plug flow to bubbly flow. The transition lines between pattern regimes are moved or sometimes disappeared due to its inclined angle.

• 에너지공학
• /
• 제23권4호
• /
• pp.73-88
• /
• 2014

Various studies on the critical flow models for sub-cooled and/or saturated water were reviewed, especially on Fauske, Moody, and Henry for basic theoretical models; Zaloudek for insight into physical phenomena for a critical flow in an orifice type flow path; Sozzi & Sutherland for a critical flow test of saturated and sub-cooled water at high pressure for orifice and nozzles; and a Marviken test on a full-scale critical flow test. In addition, critical flow tests of sub-cooled water for the break simulators in integral effect test (IET) facilities were also investigated, and a hybrid concept using Moody's and Fauske's models was considered by the authors. In the comparison of the models for the selected test data, discussions of the effect of the diameters, predictions of the critical flow models, and design aspects of break simulator for SBLOCA scenarios in the IET facilities were presented. In the effect of diameter on the critical flow rate with respect to all dimensional scales, it was concluded that the effect of diameter was found irrespective of diameter sizes. In addition, the diameter effect on slip ratio affecting the critical flow rate was suggested. From a comparison of the critical flow models and selected test data, the Henry-Fauske model of the MARS-KS code was found to be the best model predicting the critical flow rate for the selected test data under study.

• 한국농공학회지
• /
• 제44권5호
• /
• pp.54-66
• /
• 2002

A grid-based hydrological model, CELTHYM, capable of estimating base flow and surface runoff using only readily available data, was used to assess hydrologic impacts caused by land use change on Little Eagle Creek (LEC) in Central Indiana. Using time periods when land use data are available, the model was calibrated with two years of observed stream flow data, 1983-1984, and verified by comparison of model predictions with observed stream flow data for 1972-1974 and 1990-1992. Stream flow data were separated into direct runoff and base flow using HYSEP (USGS) to estimate the impacts of urbanization on each hydrologic component. Analysis of the ratio between direct runoff and total runoff from simulation results, and the change in these ratios with land use change, shows that the ratio of direct runoff increases proportionally with increasing urban area. The ratio of direct runoff also varies with annual rainfall, with dry year ratios larger than those for wet years shows that urbanization might be more harmful during dry years than abundant rainfall years in terms of water yield and water quality management.

• 한국정보통신학회논문지
• /
• 제5권1호
• /
• pp.183-191
• /
• 2001

본 논문은 데이터 슬라이스에서의 정보 흐름을 모델링하기 위해서 데이터 값 흐름 그래프(VFG: data Value Flow Graph)라고 하는 새로운 데이터 슬라이스(data slice) 표현을 개발한다. 다음으로, VFG에서의 정보 흐름의 복잡도를 측정하기 위해 기존의 흐름 복잡도를 이용하여 슬라이스 복잡도 척도를 정의한다. 본 연구에서는 각 슬라이스에 대한 슬라이스 복잡도와 전체 슬라이스 복잡도 간의 관계를 보여주고, VFG에서의 극소 수정(atomic modification)과 합성 연산자(concatenation operator)를 통해서 슬라이스 복잡도 척도의 스케일(scale) 인자들을 증명한다.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2007년도 추계 종합학술대회 논문집
• /
• pp.530-534
• /
• 2007

유동 가시화란 가시화 기술의 한 영역으로, 벡터 데이터를 2차원 또는 3차원의 형태로 시각적으로 표출하는 것을 말한다. 즉, 일반적으로 벡터 데이터는 (x, y, z)의 형식으로 이루어져 있는 수열의 집합인데, 이를 사람이 그 특징을 쉽게 인지할 수 있도록 그림 또는 애니메이션으로 표시하는 것을 말한다. 유동 가시화는 가시화 기법, 대상 데이터의 차원, 대상 유동의 종류 등 여러 가지 기준으로 분류가 가능하다. 가시화 기법은 크게 직접 기법, 인티그레이션(integration) 기법, 파생 데이터 기반 기법 등으로 나눌 수 있고, 데이터의 차원은 2차원, 2.5차원, 3차원 등으로 구분할 수 있으며, 유동의 종류는 일정한(steady) 유동과 불규칙한(unsteady) 유동으로 나눌 수 있다. 이러한 유동 가시화는 그 종류가 매우 많고 다양한데, 본 논문에서는 대표적인 인티그레이션 기법인 LIC 기법에 초점을 맞추고 각 기법들을 데이터의 차원으로 분류하고 각 기법의 장단점을 논하고자 한다.

• 한국통신학회논문지
• /
• 제29권1A호
• /
• pp.99-106
• /
• 2004

본 논문에서는 DSSS (Direct Sequence Spread Spectrum) 수신기에서 초기동기 탐색에 사용될 수 있는 정합필터에 대해서 연구하였다. 하드웨어기술언어 (HDL)로 표현될 수 있는 단일 데이터 흐름 경로를 갖는 정합필터가 설명되었다. 필터 연산의 처리시간을 개선하기 위해 데이터의 흐름이 이중으로 표현될 수 있도록 식이 정리되고 이와 연관된 하드웨어 모델이 제시되었다. 제안된 모델은 고속 처리를 위해 병렬처리와 파이프라인을 기반으로 하고 일련의 메모리, 곱셈기, 누산기로 구성된 두 개의 데이터 흐름 경로가 평행하게 배열된 구조이다. 제안된 모델에 대해 성능을 분석하였고 단인 데이터 흐름 경로 구조의 정합필터와 비교하였다.

• 한국가시화정보학회지
• /
• 제16권2호
• /
• pp.23-30
• /
• 2018

The present study compares flow fields reconstructed by data assimilation method with different combinations of parameters. As a data assimilation method, Vortex-in-Cell-sharp (VIC#), which supplements additional constraints and multigrid approximation to Vortex-in-Cell-plus (VIC+), is used to reconstruct flow fields from scattered particle tracks. Two parameters, standard deviation of Gaussian radial basis function (RBF) and grid spacing, are mainly tested using artificial data sets which contain few particle tracks. Consequent flow fields are analyzed in terms of flow structure sizes. It is demonstrated that sizes of the flow structures are proportional to an actual scale of the standard deviation of RBF. It implies that a combination of larger grid spacing and smaller standard deviation which preserves the actual standard deviation is able to save computational resources in case of a low track density. In addition, a simple comparison using an experimental data filled with dense particle tracks is conducted.

• 한국농공학회논문집
• /
• 제51권6호
• /
• pp.25-31
• /
• 2009

In this study, pollutant loads delivery ratio by flow duration in Hwangryoung A watershed was estimated. The delivery ratio was estimated with measured data by Ministry of Environment(MOE) and the regression equation based on geomorphic parameters. Eight day interval flow data measured by the MOE were converted to daily flow to calculate daily load and flow duration curve by correlating data of neighboring station which has daily flow data. Regression equation developed by previous study was tested to study watershed and found to be satisfactory. The delivery ratios estimated by two methods were compared. For the case of Biochemical oxygen demand(BOD), the delivery ratios of low flow condition were 7.6 and 15.5% by measured and regression equation, respectively. Also, the delivery ratios of Total phosphorus(T-P) for normal flow condition were 13.3 and 6.3% by measured and regression equation, respectively.