• Journal of the Korean GEO-environmental Society
• /
• v.16 no.1
• /
• pp.45-53
• /
• 2015

This study has obtained Soil Water Retention Curve (SWRC) of the unsaturated soil from the volumetric pressure plate extractor test and the triaxial compression tests was also conducted. By using the rainfall data measured in the site the seepage analysis of unsteady flow was performed with the program of SEEP/W in Geostudio 2007 and stability of the slope was analyzed with SLOPE/W program. Results of analyses show that shear strength of the unsaturated soil increases with the increase of matric suction. And it was also found that the net volumetric stress and the apparent cohesion increased with the matric suction. The seepage analysis of rainfall represents that the increasing rate of negative pore pressure at the zone of large negative pore pressure is appeared to be high even though lower rainfall intensity, but this tendency declines with ground depth. The stability analysis of slope was carried out for the actual plane of failure with the data representing the field condition. The factor of safety thus calculated was about unity (1.0) or just below, which means that the adopted method of analysis is in good agreement with the field condition.

• Science of Emotion and Sensibility
• /
• v.20 no.3
• /
• pp.97-108
• /
• 2017

The purpose of this study was to propose a product planning and design direction for smart fitness wear that will improve the impact of personal training based on researching the requirements of smart fitness wear and its acceptance level, as well as the functional demand. The study conducted in-depth interviews with professional fitness trainers and derived five categories and thirteen keywords by analyzing the categorical data analysis using the interview data. In addition, we surveyed general consumers to measure the acceptance level of smart fitness wear and the functional demand for product development. The results revealed that the difference in the acceptance level of smart fitness wear generally depended on the characteristics related to exercise involvement and exercise-related culture rather than on the demographic characteristics. With regard to the difference in the functional demand of smart fitness wear, the results showed that professional trainers focused on the scientific improvement of the effect of exercise while general consumers focused on the function that considers the sustainability of exercise. Based on the results, we proposed product planning and design directions such as 'mounting of heart rate sensing, muscle activity sensing, motion angle or posture sensing, and motion sensing', 'development of concepts and contents for expert line, ordinary line', 'compression wear design', and 'differentiation of product development according to exercise areas'.

• Journal of the Korean Data and Information Science Society
• /
• v.27 no.2
• /
• pp.409-417
• /
• 2016

The purpose of this study was to demonstrate the effect on the degree of fatigue and accuracy of cardiopulmonary resuscitation according to the different time delays (3 minutes, 4 minutes). Carrying out repeated measures of variance (repeated ANOVA), we have shown that time effect (F = 7.835, p <.01) and group effect (F = 8.695, p<.01) and the interaction effect between time and group (F = 12.582, p<.001) were all statistically significant. It means, in the test of the main effect of group and time (3 minutes, 4 minutes) using the Bonferroni method, it turned out that the amount of lactic acid of the experimental group was larger than that of the control group (p<.01), and there was no difference until 3 minutes, but the difference of the amount of lactic acid was shown between before the experiment and after 4 minutes, and between 3 minutes and 4 minutes (p <.05), respectively. Then, in the result of the corresponding sample t-test, for comparing the according to the measurement time, the accuracy after 3 minutes became higher than the case of 4 minutes (t = 4.584, p <.001). Therefore, before 119 arrives performing cardiopulmonary resuscitation for emergency, rescuers need to perform cardiopulmonary resuscitation alternating with others before 3 minutes.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.3
• /
• pp.213-220
• /
• 2000

The method of photoelasticity allows one to obtain principal stress differences and principal stress directions in a photoelastic model. In the classical approach, the photoelastic parameters are measured manually point by point. The previous methods require much time and skill in the identification and measurement of photoelastic data. Fringe phase shifting method has been recently developed and widely used to measure and analyze fringe data in photo-mechanics. This paper presents the test results of photoelastic fringe phase shifting technique for the stress analysis of a circular disk under compression and an edge-cracked plate subjected to tensile load. The technique used here requires four phase stepped photoelastic images obtained from a circular polariscope by rotating the analyzer at $0^{\circ}$, $45^{\circ}$, $90^{\circ}$ and $135^{\circ}$. Experimental results are compared with those or FEM. Good agreement between the results can be observed. However, some error may be included if the technique is used to general direction which is not parallel to isoclinic fringe.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.18 no.6
• /
• pp.1918-1926
• /
• 2004

Osteoporosis is defined as a progressive systemic skeletal disorder characterized by low bone mineral density, microarchitectual deteriorations of bone and susceptibility to fracture. numerous methods have been used for quantitative assessment of the skeleton in osteoporosis. QCT has been shown to measure changes in trabecular mineral content in the spine with great sensitivity and precision. To provide the normal reference values and changes of lumbar spinal bone mineral density in korean adult spinal bone mineral density was evaluated in 451 women (229 premenopausal and 222 postmenopausal women) and 206 men, aged 20 to 74 years old in Wonkwang hospital from 2000 to 2004, which was carried out by using QCT. women with oophorectomy, vertebral compression fracture, any history of endocrine disease and use of drugs that alter bone metabolism were excluded. According to the WHO definition, a patient is osteoporotic based on a bone mineral density(BMD) measurement that is 2.5 standard deviations (SDs) below typical peak bone mass of young healthy white women. This measurement of standard deviation from peak mass is called the T score. BMD values of normal women in their 20-24 years, 25-29 years, 30-34 years, 35-39 years, 40-44 years, 45-49 years, 50-54 years, 55-59 years, 60-64 years, 65-69 years, over 70 years were 168.95㎎/㏄ K₂PHO₄, 155.41㎎/㏄ K₂PHO₄, 166.87㎎/㏄ K₂PHO₄, 160.67㎎/㏄ K₂PHO₄, 154.06㎎/㏄ K₂PHO₄, 132.04㎎/㏄ K₂PHO₄, 114.05㎎/㏄ K₂PHO₄, 91.78㎎/㏄ K₂PHO₄, 78.61 ㎎/㏄ K₂PHO₄, 61.35㎎/㏄ K₂PHO₄, 50.53㎎/㏄ K₂PHO₄ Mean bone density of normal women was 115.77K₂PHO₄ K₂PHO₄. BMD values of normal men in their 20-24 years, 25-29 years, 30-34 years, 35-39 years, 40-44 years, 45-49 years, 50-54 years, 55-59 years, 60-64 years, 65-69 years, over 70 years were 171.46㎎/㏄ K₂PHO₄, 162.19㎎/㏄ K₂PHO₄, 155.62㎎/㏄ K₂PHO₄, 147.28㎎/㏄ K₂PHO₄, 137.56㎎/㏄ K₂PHO₄, 137.56㎎/㏄ K₂PHO₄, 101.25㎎/㏄ K₂PHO₄, 109.00㎎/㏄ K₂PHO₄, 103.32㎎/㏄ K₂PHO₄, 91.53㎎/㏄ K₂PHO₄, 88.35㎎/㏄ K₂PHO₄ Mean density of normal men was 115.77㎎/㏄ K₂PHO₄. Peak bone density of women and men was in the age group of 20-24 years and 168.95㎎/㏄ K₂PHO₄, 171.46㎎/㏄ K₂PHO₄, respectively. Bone loss was increased with aging and was accelerated in postmenopausal women than that of premenopausal women. The total loss of BMD for women and men was 70.09% and 48.47%, respectively. Postmenopausal women(mean BMD : 85.83㎎/㏄ K₂PHO₄) had significantly lower BMD than premenopausal women(meand BMD : 144.80㎎/㏄ K₂PHO₄)(p<0.001). The annual loss of BMD of women and men was 2.702㎎/㏄ K₂PHO₄ and 1.795㎎/㏄ K₂PHO₄, respectively. This study provided the BMD reference data for normal korean adult. further studies on BMD in healthy adult and comparison with published data are needed.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.11
• /
• pp.1318-1332
• /
• 1999

본 논문에서는 입출력 응용을 위해 collective I/O 기법을 기반으로 한 실행시간 시스템의 설계, 구현 그리고 그 성능평가를 기술한다. 여기서는 모든 프로세서가 동시에 I/O 요구에 따라 스케쥴링하며 I/O를 수행하는 collective I/O 방안과 프로세서들이 여러 그룹으로 묶이어, 다음 그룹이 데이터를 재배열하는 통신을 수행하는 동안 오직 한 그룹만이 동시에 I/O를 수행하는 pipelined collective I/O 등의 두 가지 설계방안을 살펴본다. Pipelined collective I/O의 전체 과정은 I/O 노드 충돌을 동적으로 줄이기 위해 파이프라인된다. 이상의 설계 부분에서는 동적으로 충돌 관리를 위한 지원을 제공한다. 본 논문에서는 다른 노드의 메모리 영역에 이미 존재하는 데이터를 재 사용하여 I/O 비용을 줄이기 위해 collective I/O 방안에서의 소프트웨어 캐슁 방안과 두 가지 모형에서의 chunking과 온라인 압축방안을 기술한다. 그리고 이상에서 기술한 방안들이 입출력을 위해 높은 성능을 보임을 기술하는데, 이 성능결과는 Intel Paragon과 ASCI/Red teraflops 기계 상에서 실험한 것이다. 그 결과 응용 레벨에서의 bandwidth는 peak point가 55%까지 측정되었다.Abstract In this paper we present the design, implementation and evaluation of a runtime system based on collective I/O techniques for irregular applications. We present two designs, namely, "Collective I/O" and "Pipelined Collective I/O". In the first scheme, all processors participate in the I/O simultaneously, making scheduling of I/O requests simpler but creating a possibility of contention at the I/O nodes. In the second approach, processors are grouped into several groups, so that only one group performs I/O simultaneously, while the next group performs communication to rearrange data, and this entire process is pipelined to reduce I/O node contention dynamically. In other words, the design provides support for dynamic contention management. Then we present a software caching method using collective I/O to reduce I/O cost by reusing data already present in the memory of other nodes. Finally, chunking and on-line compression mechanisms are included in both models. We demonstrate that we can obtain significantly high-performance for I/O above what has been possible so far. The performance results are presented on an Intel Paragon and on the ASCI/Red teraflops machine. Application level I/O bandwidth up to 55% of the peak is observed.he peak is observed.

• Journal of Broadcast Engineering
• /
• v.14 no.3
• /
• pp.322-331
• /
• 2009

This paper proposes an efficient data representation of stereo images using edge-based mesh optimization. Mash-based two dimensional warping for stereo images mainly depends on the performance of a node selection and a disparity estimation of selected nodes. Therefore, the proposed method first of all constructs the feature map which consists of both strong edges and boundary lines of objects for node selection and then generates a grid-based mesh structure using initial nodes. The displacement of each nodal position is iteratively estimated by minimizing the predicted errors between target image and predicted image after two dimensional warping for local area. Generally, iterative two dimensional warping for optimized nodal position required a high time complexity. To overcome this problem, we assume that input stereo images are only horizontal disparity and that optimal nodal position is located on the edge include object boundary lines. Therefore, proposed iterative warping method performs searching process to find optimal nodal position only on edge lines along the horizontal lines. In the experiments, we compare our proposed method with the other mesh-based methods with respect to the quality by using Peak Signal to Noise Ratio (PSNR) according to the number of nodes. Furthermore, computational complexity for an optimal mesh generation is also estimated. Therefore, we have the results that our proposed method provides an efficient stereo image representation not only fast optimal mesh generation but also decreasing of quality deterioration in spite of a small number of nodes through our experiments.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.4
• /
• pp.9-21
• /
• 2004

In this paper, we proposed the image hiding method which decreases calculation amount by encrypt partial data using discrete wavelet transform and linear scale quantization which were adopted as the main technique for frequency transform in JPEG2000 standard. Also we used the chaotic system which has smaller calculation amount than other encryption algorithms and then dramatically decreased calculation amount. This method operates encryption process between quantization and entropy coding for preserving compression ratio of images and uses the subband selection method and the random changing method using the chaotic system. For ciphering the quantization index we use a novel image encryption algerian of cyclically shifted in the right or left direction and encrypts two quantization assignment method (Top-down/Reflection code), made change of data less. Also, suggested encryption method to JPEG2000 progressive transmission. The experiments have been performed with the proposed methods implemented in software for about 500 images. consequently, we are sure that the proposed are efficient image encryption methods to acquire the high encryption effect with small amount of encryption. It has been shown that there exits a relation of trade-off between the execution time and the effect of the encryption. It means that the proposed methods can be selectively used according to the application areas. Also, because the proposed methods are performed in the application layer, they are expected to be a good solution for the end-to-end security problem, which is appearing as one of the important problems in the networks with both wired and wireless sections.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.12
• /
• pp.894-906
• /
• 2006

There are many difficulties to develop a mobile contents due to many constraints on mobile environments. It is difficult to make a good mobile contents with only visual reduction of existing contents on wire Internet. Therefore, it is essential to devise the data representation and to develop the authoring tool to meet the needs of the mobile contents market. We suggest the compact mobile contents to learn Chinese characters and developed its authoring tool. The animation which our system produces is realistic as if someone writes letters with pen or brush. Moreover, our authoring tool makes a user generate a Chinese character animation easily and rapidly although she or he has not many knowledge in computer graphics, mobile programming or Chinese characters. The method to generate the stroke animation is following: We take basic character shape information represented with several contours from TTF(TrueType Font) and get the information for the stroke segmentation and stroke ordering from simple user input. And then, we decompose whole character shape into some strokes by using polygonal approximation technique. Next, the stroke animation for each stroke is automatically generated by the scan line algorithm ordered by the stroke direction. Finally, the ordered scan lines are compressed into some integers by reducing coordinate redundancy As a result, the stroke animation of our system is even smaller than GIF animation. Our method can be extended to rendering and animation of Hangul or general 2D shape based on vector graphics. We have the plan to find the method to automate the stroke segmentation and ordering without user input.

• Journal of radiological science and technology
• /
• v.38 no.4
• /
• pp.375-381
• /
• 2015

Digital Radiography is a big part of diagnostic radiology. Because uncorrected digital radiography image supported false effect of Patient's health care. We must be manage the correct digital radiography image. Thus, the artifact images can have effect to make a wrong diagnosis. We report types of occurrence by analyzing the artifacts that occurs in digital radiography system. We had collected the artifacts occurred in digital radiography system of general hospital from 2007 to 2014. The collected data had analyzed and then had categorize as the occurred causes. The artifacts could be categorized by hardware artifacts, software artifacts, operating errors, system artifacts, and others. Hardware artifact from a Ghost artifact that is caused by lag effect occurred most frequently. The others cases are the artifacts caused by RF noise and foreign body in equipments. Software artifacts are many different types of reasons. The uncorrected processing artifacts and the image processing error artifacts occurred most frequently. Exposure data recognize (EDR) error artifacts, the processing error of commissural line, and etc., the software artifacts were caused by various reasons. Operating artifacts were caused when the user didn't have the full understanding of the digital medical image system. System artifacts had appeared the error due to DICOM header information and the compression algorithm. The obvious artifacts should be re-examined, and it could result in increasing the exposure dose of the patient. The unclear artifact leads to a wrong diagnosis and added examination. The ability to correctly determine artifact are required. We have to reduce the artifact occurrences by understanding its characteristic and providing sustainable education as well as the maintenance of the equipments.