• 대한설비공학회지:설비저널
• /
• 제14권3호
• /
• pp.175-186
• /
• 1985

This paper presents a method for estimating the useful output of solar space heating system and estimates their performance with variance of collector size, storage volume, collector tilt and other factors . The analysis is performed by the computer simulation and by 'running' conceptual systems against solar intensities and ambient temperature for a model year stored in a computer. System performance is analyzed on monthly and yearly basis respectively and at the same time, the economics of various systems are evaluated . And also, this paper shows how an optimized design can be selected for any locality for which solar data, economic parameters and system performance are provided. It is shown that storage volume of 75 liter per $m^2$ of solar collector lead to the best design.

• 대한설비공학회지:설비저널
• /
• 제12권1호
• /
• pp.2-11
• /
• 1983

The solar energy retention rate of a flat plate collector can be increased by increasing water flow rate through the collector which also increases the pumping energy incurred in obtaining that solar energy. The problem of optimal flow rate is formulated to fit within the framework of pontryagin's maximum principle and with a few simplifying assumptions, an optimal solution that can be easily implemented is obtaincd, The optimal solution is used in the simulation of a solar heating system using actual climatological data and the results are compared with that of on-off control. The result that not only the object function but, In some cases, also the solar energy retention rate the collector is increased. In is also found that the optimal control gets more advantageous as the solar insolation level gets lower, and also as tile cost of auxiliary heating fuel gets higher.

• 대한설비공학회지:설비저널
• /
• 제8권4호
• /
• pp.221-236
• /
• 1979

The three years Performance of a liquid type solar heating system has been determined for a system which has been determined for a system which has been operating continuously since 1976 in Seoul with no serious maintenance. A flat plate collector is used to transform incident solar radiation into thermal energy. This energy is stored if the form of sensible energy and used as needed to supply the space heating loads. An electric auxiliary heaters are provided to supply energy for space heating load when the energy in the storage tank is depleted. The ratio of useful collected solar heat divided by the total solar radiation on the collector was obtained about 84 per cent. It is also obtained the relation between ratio of solar collector area to the heating area and the ratio of useful collected solar energy to the heating load for the useful design data. A comparison between the measured and simulated results with the solar space heating system is described. Hour by hour simulation is made on unsteady state basis using the system parameters and meteorological data at the experiment site. The result of comparison turned out satisfactory for the solar heating system, though the simulation was formed somewhat higher than by experimental.

• 설비공학논문집
• /
• 제14권12호
• /
• pp.1084-1091
• /
• 2002

In general, flat-plate solar collectors are generally fixed in place at some angles. The most common method is to orient solar collectors toward the true south, where variations up to 15 degrees east or west are acceptable and the tiIt angle of the collectors is calculated from latitude and different heating applications. However, the best angle of flat-plate collectors depends upon whether the dominant load occurs in the winter, summer, or evenly all year. Moreover, this setting angle must consider the average insolation characteristics of the region exactly. In this study, the setting angle of flat-plate solar collectors is presented for Busan area by using domestic typical meteorological year weather data, so that the fixed flat-plate solar collectors must be set as quantitatively as possible.

• 한국정보과학회논문지:정보통신
• /
• 제29권5호
• /
• pp.482-494
• /
• 2002

최근 등장한 메일 기반의 계좌이체 시스템은 송금인이 수금인의 계좌번호를 알 필요 없이 메일 주소만 알면 계좌 이체가 가능하도록 하여 사용자에게 많은 편의를 제공한다. 그러나 대부분의 메일기반 계좌이체 시스템은 SSL 기반으로 동작하고 있어 거래 사실에 대한 부인이 가능하고, 영수증 발급이 불가능하다는 문제점이 있다. 이에 따라 이 논문에서는 기밀성, 무결성, 사용자 인증, 부인 봉쇄 둥의 보안 서비스를 제공하고 인증서 기반으로 동작하는 국제 표준 메일 보안 메커니즘인 S/MIME을 적용한 메일 기반의 지불 메커니즘을 제안한다. 이 메커니즘에서는 'Check'라는 수표와 같은 역할을 하는 메시지를 통해 모든 계좌이체 정보가 송금인과 수금인 및 메일 결제 서버 사이에서 전달된다. 이 시스템은 기존의 시스템과 마찬가지로 수금인의 메일 주소만 알면 계좌이체가 가능한 편리성을 제공함과 동시에 S/MIME에 기반한 보안 서비스를 제공함으로서 기존 지불 시스템에서 가장 문제가 되는 송신 부인 문제를 해결하고 영수증 발급도 가능하다.

• 한국태양에너지학회 논문집
• /
• 제33권1호
• /
• pp.89-95
• /
• 2013

A DBLP(Double blind light pipe) daylight system can be installed at a building exterior wall or roof to replace artificial light during the day time. This system was consisted of a double blind light collector, a mirror duct type light transformer and a prism light pipe distributor. The double blinds were used to track the sun's altitude and azimuth movements to collect the sunlight throughout the day. The sunlight collected by the light collector was reflected on the first mirror and the second mirror and sent to the light pipe through the light transformer. The transformer was designed to deliver the sunlight into the light pipe efficiently. The light distributor plays a role in diffusing the sunlight coming in through the light collector to be used for indoor lighting. In this paper, a DBLP system has been designed, installed and tested at a KIER daylighting twin test cell. The DBLP daylighting system was applied to the experimental test cell which has an indoor area of 2.0 m wide ${\times}$ 2.4 m height ${\times}$ 3.8 m length. The experiment was conducted from January 30 to February 27, 2012, under clear skies and partially cloudy skies. Data was collected from 10:00 am to 16:00 pm every 2 minute and the average was calculated for every 30 minute of the data collection to obtain the system efficiency. The results indicated that the DBLP system efficiency was evaluated as 11.67%. The DBLP system indoor illumination energy reduction was predicted as 0.822 kWh/day. This could replace 4 sets of a 32W fluorescent lamp operating 6.4 hours per a day.

• KIEAE Journal
• /
• 제16권6호
• /
• pp.167-172
• /
• 2016

Purpose: The solar water heater with natural circulation has been used for several decades in the world as it is automatically operated without a pump and controller and is easy to maintain and repair. After the subsidy was offered from 2012, the solar water heater with natural circulation is becoming increasingly popular in Korea. Recently, the development of a wall-integrated solar water heater, which improves the applicability of buildings and prevents the overheating in the summer, is being developed. On the other hand, the design and performance evaluation data of solar water heaters are very inadequate, and analysis of heat and flow is required to develop a new type of solar water heater. Method: Therefore, in this study, we proposed a new simplified system analysis model that reflects heat and pressure loss from the test results of KS B ISO 9806-1 (Solar collector test method), assuming that the collector is a simple pipe system, the validity of which was verified through experiments. Result: As a result, first, the RMSE of the system circulation flow rate and the average temperature of the inlet and outlet of the collector according to the experimental results and the simulation are 0.05563 and 0.88530, respectively, which are very consistent. Secondly, the mass flow rate is increased linearly with the increase of the solar radiation, and the mass flow rate is 0.0104 ~ 0.0180kg/s in the range of $200{\sim}380W/m^2$ of solar irradiance. Compared with the test flow rate 0.0764kg / s of the test collector, it showed a level of less than 20%.

• 지질공학
• /
• 제28권4호
• /
• pp.583-592
• /
• 2018

최근들어 방사형 집수정 방식의 대용량 강변여과수 개발에 따른 배후지의 지하수위 강하에 대한 우려가 존재하고 있다. 본 연구에서는 안성천의 방사형 집수정을 대상으로 Modflow를 활용하여 수평정의 취수량에 따른 배후지의 수위 강하를 예측하였으며, 이 데이터를 기반으로 배후지 수위 강하가 최소가 되는 수평정별 취수량을 결정하는 다층퍼셉트론 기반의 인공신경망 모델을 개발하였다. 하천 방향으로 굴착된 수평정 HW-6의 취수량을 높이는 것이 OW-7 및 OB-11 관측정의 지하수위를 높게 유지하는데 필요한 것으로 평가되었다. 또한, 모델 입력 자료의 수 및 훈련과 검증 자료의 분류는 인공신경망 모델 결과에 영향을 미치므로 유의하여야 한다. 향후 현장의 실제 운영 자료와 수치모델의 비교를 통하여 인공신경망 모델을 보완한다면 배후지의 지하수 관리에 기여할 것으로 본다.

• 대한설비공학회지:설비저널
• /
• 제16권1호
• /
• pp.63-73
• /
• 1987

This research, through the analysis of existing programs, presents a simplified logical program which can show the thermal performance of a system, based only on hourly weather data and the system design data. This program is applicable for analyzing a system of direct heating or recirculation heating which may enhance the performance of an existing solar house. Using these system in the existing systems a little raise in performance. The model analysis of a $100\;m^2$ solar house in the seoul region shows that the following figures are the most efficient and suitable; 1. Installation an81e of collector: $45^{\circ}$ 2. Collector size: $34.56\;m^2$ 3. Capacity of main storage tank: $25\;m^3$

• 정보처리학회논문지C
• /
• 제18C권3호
• /
• pp.195-198
• /
• 2011

본 연구에서는 ECG 신호를 측정하는 시스템에서 센서들과 기기 사이의 연결을 Zigbee 네트워크를 사용하여 무선화하고, 이를 통하여 이동성과 편리성을 제공하면서도, 병원용 ECG 기기에 준하는 데이터 정밀도를 가지는 U-healthcare용 ECG 시스템을 설계, 구현하였다. 대부분의 의료용 기기에서 이동성에 가장 문제가 되는 것은 센서와 기기를 연결하는 케이블로, 본 연구에서는 이를 줄이거나 없애는 방법으로 Zigbee를 기반으로 데이터를 송수신하는 센서 모듈과 컬렉터 모듈을 설계, 구현하여 근거리에서 동작하는 무선 네트워크를 구성하고, 이를 통하여 각 송신 모듈로부터 전송되는 데이터들을 수신하는 Zigbee-SD 전송 시스템을 설계, 구현하였다. 또한 ECG 신호의 분석과 처리에 스마트폰을 사용하여 데이터 분석과 심박수 표시를 수행하는 앱 응용 프로그램으로 구현함으로써 유비쿼터스 환경에서 이동성과 편리성을 최대한으로 제공할 수 있는 효과적인 U-healthcare 시스템을 구현하였다.