• 제목/요약/키워드: Data collector

검색결과 192건 처리시간 0.031초

평판형 태양열 집열기의 연중 열적 성능의 모델링 해석 (Modeling Analysis for Thermal Performance of Solar Flat Plate Collector System Through a Year)

  • 김규덕;박배덕;김경훈
    • 한국수소및신에너지학회논문집
    • /
    • 제25권5호
    • /
    • pp.541-549
    • /
    • 2014
  • The monthly-average meteorological data, in particular, the monthly average daily terrestrial horizontal insolation are required for designing solar thermal energy systems. In this paper, the dynamic thermal performance of a flat plate solar collector system is numerically investigated through a year from the monthly average insolation data in Seoul. For a specified data set of solar collector system, the dynamic behaviors of total solar radiation on the tilted collector surfaces, heat loss from the collector system, useful energy and collector efficiency are analyzed from January to December by a mathematical simulation model. In addition, the monthly average daily total solar radiation, useful energy, and daily collector efficiencies through a year are estimated. The simulated results show that the average total radiation is highest in March and the useful energy is highest in October, while the total radiation and the collector efficiency are lowest in July.

마이크로 데이터센터의 환경 모니터링 시스템 개발 연구 (A Study on the Development for Environment Monitoring System of Micro Data Center)

  • 이갑래;김영식
    • 문화기술의 융합
    • /
    • 제8권2호
    • /
    • pp.355-360
    • /
    • 2022
  • 본 연구에서는 마이크로 데이터 센터의 환경 모니터링 시스템(EMS)을 설계하고 개발하는 방법을 나타낸다. 설계하는 환경 모니터링 시스템은 IoT 센서 및 싱글보드 컴퓨터를 이용하여 데이터센터 운영환경을 실시간으로 감지하여 데이터를 해석하고 운영환경을 모니터한다. 먼저, EMS 하드웨어 플랫폼 및 IoT 센싱 패키지 설계 방법에 대하여 나타낸다. 또한 서로 다른 프로토콜을 갖는 IoT 센서에 대한 데이터 수집 SW을 설계하고 원격에서 모니터링이 가능한 EMS 모니터링 SW를 개발한다. 데이터 수집 SW는 센서 수집 모듈과 수집 메니저 모듈로 구성된다. EMS 소프트웨어는 마이크로 서비스 아키텍츠(MSA) 개념을 적용하여 설계하며 각각의 서비스는 독립적인 비즈니스 로직을 포함한다.

인공태양에 의한 이중 진공 유리관의 집열특성에 관한 연구 (A Study on the Collector Characteristics of Evacuated Double Glass Tube by Artificial Sun)

  • 남용한;신재호;모종근;정한식;정효민;서정세
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2003년도 춘계학술대회
    • /
    • pp.1542-1547
    • /
    • 2003
  • This paper represents the solar collector performance with type of an evacuate double glass, and a copper tube was installed in center of collector to get a solar thermal energy. The one module of solar collector and artificial sun were used in this experiment The distance between artificial sun and solar collector was fixed at 0.5m, and this experimental condition was focused on winter season. The experiments were carried out. three times for getting a accurate data and the heat amount of one module evacuate d solar collector was estimated at out. 48 kcal/hr.

  • PDF

전력선 통신을 이용한 원격 집진기 bag 제어 시스템 개발 (Development of a Remote Dust Collector Bag Control System using Power Line Communication)

  • 김정숙
    • 한국컴퓨터정보학회논문지
    • /
    • 제15권4호
    • /
    • pp.91-98
    • /
    • 2010
  • 통신과 제어 기술의 발전과 인터넷 기능 강화로 이들을 이용해 전통 제조업에서 위험과 생산 비용을 줄이면서 제품의 성능을 향상시키기 위한 동기 인식이 확산되고 있다. 이에 본 논문에서는 첨단 IT 기술을 전통산업인 집진기에 융합한 지능형 원격 집진기 bag 제어 시스템을 이벤트 기반으로 개발하였다. 먼저 집진기의 센서인 차압 측정기의 아날로그 출력 데이터를 디지털로 변환시키는 A/D 변환기를 마이크로 프로세서를 사용하여 제작하였다. 또 이들을 RS-232 통신 방법으로 전력선 통신 모뎀과 연결하는 기술을 개발하였다. 다음은 전력선 통신을 이용하여 집진기 bag 상태 정보를 효율적으로 전송할 수 있도록 n-바이트 메시지 형식을 정의하였다. 그리고 집진기와 집진기 bag을 논리적으로 모델링하기 위해 자료형을 정의하였고, 이를 이용해 집진기와 집진기 bag을 XML과 객체지향 모델링 기법을 이용해 모델링하였다. 뿐만 아니라 집진기 bag의 교체시기를 정확하게 파악하여 집진기 bag의 교체시기를 관리자에게 실시간으로 다양한 시각적인 사용자 인터페이스를 이용해 제시하도록 개발하였다.

자동 안개 채취기 개발 (Development of an Automatic Fog Water Collector)

  • 이승규;신상열;김진영;김만구;김희갑;김민건;성주헌;박찬원;김일환
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2000년도 제15차 학술회의논문집
    • /
    • pp.385-385
    • /
    • 2000
  • In this paper, We presents the development of an automatic fog water collector that operates during fog events. This collector consists of fraction collectors, a wind hall and a fog sensor. If a fog event occurred, then the fog sensor wouldjudge whether it is a fog or not. If the fog sensor judged the fug, then the fog in the air would be rucked by suction fans. At the same time, the wind direction, the wind velocity, the atmospheric temperature and the atmospheric pressure would be measured and recorded. We are also developing a wireless communication system for the remote control and the remote data analysis in order to collect, store and process the data collected in the automatic fog water collector.

  • PDF

자동 안개 채취기 개발 (Development of an Automatic Fog Water Collector)

  • 이승규;김일환
    • 산업기술연구
    • /
    • 제20권B호
    • /
    • pp.183-188
    • /
    • 2000
  • In this paper, we present a development of automatic fog water collector that operates during fog events. This collector consists of fraction collectors, a wind hall and a fog sensor. When a fog event is begin, then the fog sensor would judge whether it is a fog or not. If a fog is detected, the fog would be gathered by air suction fans, At the same time, the wind direction, the wind velocity, the atmospheric temperature and pressure would be measured and record simultaneously. We are also developing a wireless communication system for the remote control and data analysis to collect, store and process data collected in the automatic fog water collector.

  • PDF

축열조를 채용한 복합 포물형 태양열 집열기(CPC) 시스템의 연중 열적 성능 해석 (Thermal Performance Analysis of Compound Parabolic Collector (CPC) System Employing Storage Tank Through a Year)

  • 임석규;정영관;김경훈
    • 한국수소및신에너지학회논문집
    • /
    • 제30권4호
    • /
    • pp.376-383
    • /
    • 2019
  • This paper presents of thermal performance analysis by using mathematical models for a compound parabolic collector (CPC) system employing heat storage tank. The thermal performance including insolation energy, heat loss from collector system, useful energy, collector efficiency, and temperature of storage tank were theoretically investigated through a year using monthly-average meteorological data at Seoul. The simulated results showed that the CPC systems are suitable for the applications of higher temperature than flat plate collector (FPC) systems.

부하를 고려한 태양열온수시스템의 일간 집열효율에 대한 실험적 분석 (An Experimental Study on Daily Efficiency of Solar Collector with Heating Loads of Solar Water Heating System)

  • 이경호;주홍진;윤응상;곽희열
    • 한국태양에너지학회 논문집
    • /
    • 제32권2호
    • /
    • pp.19-27
    • /
    • 2012
  • This paper describes an experimental study on efficiency of solar collector in solar water heating system connected to hourly water heating load. In general, the functional form of solar efficiency is expressed as a function of fluid temperature entering solar collector, ambient temperature, and solar irradiance. When energy saving from solar heating of water heating system is analyzed on along-term basis such as one year with given solar irradiance data, simplified analysis is more convenient han detailed system simulation for quick assessment. However, the functional form of the efficiency is not convenient for approximately simplified energy analysis because the inlet temperature can be obtained through a detailed system simulation. In the study, solar collector efficiency is obtained with various daily water heating load sand daily solar irradiance using experimental tests. The study also considers large residential buildings such as apartment buildings for application of solar water heating systems. From test results, it is found that daily solar collector efficiency is proportional to daily water heating loads and daily solar irradiance. The data obtained from the study can be utilized to find a functional relation between daily solar irradiance and daily heating load in stead of collector inlet temperature for application of solar collector efficiency to long-term approximated energy analysis of solar heating system.

직접회로용 NPN BJT의 베이스-컬렉터간 역방향 항복전압 추출 알고리즘 (The Algorithm for Calculating the Base-Collector Breakdown Voltage of NPN BJT for Integrated Circuits)

  • 이은구;김철성
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제52권2호
    • /
    • pp.67-73
    • /
    • 2003
  • The algorithm (or calculating the base-collector breakdown voltage of NPN BJT(Bipolar Junction Transistor) for integrated circuits is Proposed. The method for calculating the electric field using the solution of Poisson's equation is presented and the method for calculating the breakdown voltage using the integration of ionization coefficients is presented. The base-collector breakdown voltage of NPN BJT using 20V process obtained from the proposed method shows an averaged relative error of 8.0% compared with the measured data and the base-collector breakdown voltage of NPN BJT using 30V process shows an averaged relative error of 4.3% compared with the measured data

현장자료를 이용한 침투집수정의 유출저감 효과에 관한 연구 (field Study on Effects of Runoff Reduction in the Infiltration Collector Well)

  • 장복진;여운광
    • 한국수자원학회논문집
    • /
    • 제35권5호
    • /
    • pp.611-618
    • /
    • 2002
  • 본 연구에서는 우수유출저감시설 중 침투형 집수정의 효과를 규명하기 위하여 성남, 오산, 청주지역에 설치된 시범시설에서 실시간으로 현장계측을 수행하고 이들 자료를 분석하여 그 효과를 정량화하였다. 현장 강우자료와 수위 자료를 토대로 자 지점에 설치된 일반집수정과 침투집수정에서의 강우량에 따른 유출량을 비교하여 유출저감율과 첨두유량저감율을 총강우량, 평균10분강우강도, 최대10분강우강도에 따라서 각각 비교 분석하였다. 각 지점의 현장자료를 통하여 침투집수정의 강우량에 따른 유출량을 일반집수정과 비교한 결과 1개의 침투집수정이 평균 70%의 총유출량저감율과 40∼70%의 첨두유량 저감효과를 나타내었다.