• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.2
• /
• pp.78-85
• /
• 2012

Low-Voltage power lines should equip surge protection devices which protect electronic equipments and human lives against lightning and abnormal voltages. Data transmission capacity of the power line is determined by frequency characteristics of the surge protective devices. To analyze the effects of surge protective devices on the data transmission performance, various combinations of installation methods are tested which include ZnO varistor elements that is compatible with class I, class II and class III. The result claims that ZnO varistor for class III is found to be one of the main factors that deteriorates the transmission performance. To overcome this problem a serial connection methed between Gap type SPD and ZnO varistor is proposed. With the proposed scheme, laboratory experimental results show that the data transmission performance can be improved up to 91.9[%] with proper SPD combination.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.295-298
• /
• 2002

This paper has been proposed about the efficient ACL data transmission method by link quality for Bluetooth. By tile host tile HCI command confirm tile link quality values and change the packet type into several environment. And then we can analyze the data rate through this. From the construed result, after the suitable ACL packet type had been selected, the efficient data transmission method was proposed.

• Journal of Information Processing Systems
• /
• v.16 no.5
• /
• pp.1048-1063
• /
• 2020

In this study, we propose a reinforcement learning agent to control the data transmission rates of nodes in carrier sensing multiple access with collision avoidance (CSMA/CA)-based wireless networks. We design a reinforcement learning (RL) agent, based on Q-learning. The agent learns the environment using the timeout events of packets, which are locally available in data sending nodes. The agent selects actions to control the data transmission rates of nodes that adjust the modulation and coding scheme (MCS) levels of the data packets to utilize the available bandwidth in dynamically changing channel conditions effectively. We use the ns3-gym framework to simulate RL and investigate the effects of the parameters of Q-learning on the performance of the RL agent. The simulation results indicate that the proposed RL agent adequately adjusts the MCS levels according to the changes in the network, and achieves a high throughput comparable to those of the existing data transmission rate adaptation schemes such as Minstrel.

• Journal of the Semiconductor & Display Technology
• /
• v.9 no.2
• /
• pp.11-14
• /
• 2010

In this paper, an improved binary-CDMA (Code Division Multiple Access) system for high speed multimedia data transmission will be presented. The improved binary CDMA technology will be used in municipal wireless network. The new name of the system is the Guardian system using a binary CDMA technology. The Guardian system can provide high data rate, and improve its throughput by minimizing latency from the limitation of resources of system bus during multimedia data transmission. Finally, we analyze the performance of Guardian modem according to the report of wireless data transmission test.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.233-235
• /
• 2005

As a class of block codes, LDPC code with any desired code rate and code length is easily constructed. In OFDM system high data transmission is possible, In this paper, we examined the performance of four high-rate(0.75, 0.8, 0.889, 09412) LDPC coded OFDM in image transmission over Rayleigh fading channel. The high-rate of 0.9412 LDPC coded OFDM system obtained about 12dB gain over the OFDM at BER of $10^{-3}$ over Rayleigh fading channel. Also, the PSNR of code rate 0.9412 LDPC coded OFDM system at SNR=10dB is given by 18.8047dB where uncoded OFDM system gives 9.7303 dB.

• Journal of IKEEE
• /
• v.7 no.1 s.12
• /
• pp.63-71
• /
• 2003

In this paper, we propose an DSR(Dynamic Source Routing) protocol to support QoS for reliable data transmission in the mobile ad-hoc network. The proposed algorithm uses DSR protocol to support QoS as its basic routing protocol, and uses the nodes which are between source and destination nodes as key QoS support. Because of moving nodes there is some problem that is restricted reliable data transmission. For solve this problem, source node set up the QoS link with destination node. The nodes that are located at QoS link and find out loss of transmission path save the transmitting data packets. Those search a new transmission path to destination node and transmit the saved data packet to destination node. As the result of evaluation, we found the proposed QoS network guaranteed reliable data transmission with almost 100% data reception rate for slowly moving mobile ad-hoc network and with more 96% data reception rate, which is improvement of 3.7737% reception rate compared with none QoS network, for continuously fast moving mobile ad-hoc network.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.3
• /
• pp.370-378
• /
• 2018

The mission data in missile systems should be quickly and reliably transmitted from a mission transmission device to a guidance control unit. The MIL-STD-1553B is one of the reliable communication standards, but its bit rate is generally limited to 1Mbps due to the intrinsic properties of its electrical design. Therefore, the bus controller needs to be optimized to efficiently transmit the mission data on the inevitably limited bit rate. This paper proposes an analytical approach based on sampling-based optimization methods to maximize the data throughput without data loss. The proposed approach was evaluated in the simulations with the data transmission model for the MIL-STD-1553B communication system. The results of the proposed methods were applied to a real-time system and showed that the proposed method was successfully performed.

• Publications of The Korean Astronomical Society
• /
• v.29 no.3
• /
• pp.45-52
• /
• 2014

This paper describes the development of algorithm for direct data transmission between Raw VLBI Data Buffer (RVDB) and Huge Capacity Data Server (HCDS) operated in Korea-Japan Correlation Center (KJCC). The transmitted data is the VLBI observation data, which is recorded at each radio telescope site, and the data transmitting rate is varying from 1 Gbps, in usual case, upto 8 Gbps. The developed algorithm for data transmission enables the direct data transmission between RVDB and HCDS through 10 Gbps optical network using VLBI Data Interchange Format (VDIF). Proposed method adopts the conventional UDP/IP protocol, but in order to prevent the loss of data during data transmission, the packet error monitoring and data re-transmission functions are newly designed. The VDIF specification and VDIFCP (VDIF Control Protocol) are used for the direct data transmission between RVDB and HCDS. To validate the developed algorithm for data transmission, we conducted the data transmission from RVDB to HCDS, and compared to the transmitted data with the original data bit by bit. We confirmed that the transmitted data is identical to the original data without any loss and it has been recovered well even if there were some packet losses.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.4
• /
• pp.600-610
• /
• 2001

The effects of group delay and non-linear characteristics on high data rate(HDR) satellite channel are presented in this paper Based on the modeling of group delay and non-linear characteristics the system performances which provide various data rate services were analyzed in Ka-band satellite channel. As the transmission data rate is increased, the degradation due to these channel characteristics is severely increased. The linear component of group delay and the AM-AM component of non-linear characteristics severely affect the system performance. To efficiently provide the various service via the same transmission system it is necessary to equalize the primary impairment factors. The optimum operating points of HDR satellite transmission system are implemented by considering the analyzed results on channel characteristics.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.12B
• /
• pp.2109-2119
• /
• 2000

In this paper, the Packet CDMA Reservation ALOHA protocol is proposed to support the multi-traffic services such as voice and videophone services with handoff calls, high-rate data and low-rate data services efficiently on the multi-rate transmission in uplink cellular systems. The frame structure, composed of the access slot and the transmission slot, and the proposed access permission probability based on the estimated number of contending users for each service are presented to reduce MAI. The assured priority to the voice and the videophone handoff calls is given through higher access permission probability. And through the proposed code assignment scheme, the voice service can be provided without the voice packet dropping probability in the CDMA/PRMA protocols. The code reservation is allowed to the voice and the videophone services. The low-rate data service uses the available codes during the silent periods of voice calls and the remaining codes in the codes assigned to the voice service to utilize codes efficiently. The high-rate data service uses the assigned codes to the high-rate data service and the remaining codes in the codes assigned to the videophone service. Using the Markov-chain subsystem model for each service including the handoff calls in uplink cellular systems, the steady-state performances are simulated and analyzed. After a round of tests for the examples, through the proposed code assignment scheme and the access permission probability, the Packet CDMA Reservation ALOHA protocol can guarantee the priority and the constant QoS for the handoff calls even at large number of contending users. Also, the data services are integrated efficiently on the multi-rate transmission.