• The KIPS Transactions:PartC
• /
• v.11C no.5
• /
• pp.683-688
• /
• 2004

NAT is a very useful IP address translation technique that allows two connected networks using different and incompatible IP address schemes. But it is impractical to use NAT for an application which uses the encrypted IP packet, embedding IP addresses inside of data payloads, to guarantee End-to-End Security such as IPSec. In addition to rewriting the source/destination IP addresses in the packet, NAT must modify IP checksum every time, which could lead to considerable performance decrease of the overall system in the process of the address translation. RSIP is an alternative to solve these disadvantages of NAT and the address shortage problems. Both NAT and RSIP divide networks into inside and outside addressing realms. NAT translates addresses between internal network and external network, but RSIP uses a borrowed external address for outside communications. RSIP server assigns a routable public address to a RSIP client temporarily to communicate with public net-work outside of the private network. In this paper, RSIP gateway for intranet environment is designed and its performance is evaluated. From the results of performance evaluation, we knew that RSIP is operated less sensitive to the data traffic. Also, the experiment shows that RSIP performs better than NAT when the transmission data grows larger.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.9 s.240
• /
• pp.1235-1242
• /
• 2005

A district heating(DH) system supplies environmentally-friend heat and is appropriate for reduction of energy consumption and/or air pollutions. The DH transmission pipe, composed of supply and return pipes, has been used to transmit the heat and prevent heat loss during transportation. The two types of pipes are operated at a temperature of $75\~115^{\circ}C\;and\;40\~65^{\circ}C$, respectively, with an operating pressure of less than 1.568MPa. The objectives of this paper are to systematize data processing of transition temperature and investigate its effects on fatigue life of DH pipes. For the sake of this, about 5 millions temperature data were measured during one year at ten locations, and then available fatigue lift estimation schemes were examined and applied to quantify the specific thermal fatigue life of each pipe. As a result, a relational database management system as well as reliable fatigue lift evaluation procedures is established for Korean DH pipes. Also, since the prototypal evaluation results satisfied both cycle-based and stress-based fatigue criteria, those can be used as useful information in the future fer optimal design, operation and energy saving via setting of efficient condition and stabilization of water temperature.

• Smart Structures and Systems
• /
• v.6 no.3
• /
• pp.197-209
• /
• 2010

The structural state of a bridge is currently examined by visual inspection or by wired sensor techniques, which are relatively expensive, vulnerable to inclement conditions, and time consuming to undertake. In contrast, wireless sensor networks are easy to deploy and flexible in application so that the network can adjust to the individual structure. Different sensing techniques have been used with such networks, but the acoustic emission technique has rarely been utilized. With the use of acoustic emission (AE) techniques it is possible to detect internal structural damage, from cracks propagating during the routine use of a structure, e.g. breakage of prestressing wires. To date, AE data analysis techniques are not appropriate for the requirements of a wireless network due to the very exact time synchronization needed between multiple sensors, and power consumption issues. To unleash the power of the acoustic emission technique on large, extended structures, recording and local analysis techniques need better algorithms to handle and reduce the immense amount of data generated. Preliminary results from utilizing a new concept called Acoustic Emission Array Processing to locally reduce data to information are presented. Results show that the azimuthal location of a seismic source can be successfully identified, using an array of six to eight poor-quality AE sensors arranged in a circular array approximately 200 mm in diameter. AE beamforming only requires very fine time synchronization of the sensors within a single array, relative timing between sensors of $1{\mu}s$ can easily be performed by a single Mote servicing the array. The method concentrates the essence of six to eight extended waveforms into a single value to be sent through the wireless network, resulting in power savings by avoiding extended radio transmission.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.7
• /
• pp.1524-1531
• /
• 2004

This study analyzes a load balancing technique using Round Robin Algorithm. The study uses two software packages (Packet Capture and Round Robin Test Package) to check packet volume from Virtual Network structure (data generator, virtual server, Server1,2,3), and finds out traffic distribution toward Server1,2 and 3. The functions of implemented Round Robin Load Balancing Monitoring System include round robin testing, system monitoring, and graphical indication of data transmission and packet volume. As the result of the study shows, Round Robin Algorithm allows servers to ensure definite traffic distribution, unless incoming data loads differ much. Although error levels are high in some cases, they were eventually alleviated by repeated tests for a long period of time.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.800-801
• /
• 2017

Location-based services (LBS) are used in various applications such as emergency support, navigation, location, traffic routes, information gathering, and entertainment due to the rapid growth of information communication technologies and mobile phones. In general, locations are represented by coordinates and are related to terrain. These are of great interest in mobile-based data transmission. This paper proposes a method to exchange the contact of the other party by detecting the movement of the mobile phone of the individual user based on the location-based service. The proposed method extracts motion using the acceleration sensor of the mobile phone and transmits the location and time information to the server when the motion continues for a predetermined time. Attempts to establish a connection between users who are experiencing motion in mobile phones in the short distance have been made from the server. Once the connection between the users is made, the encrypted contact is received from the server. Experimental results show that the proposed method can exchange data by minimizing the processing in the handset compared with the existing method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.11
• /
• pp.2640-2644
• /
• 2014

With the development of technology, wireless sensor networks (WSN) are wireless networks of consisting a large number of small and low-cost sensors. Wireless sensor networks facilitate collaboration to achieve the perception of information collection, processing and transmission tasks in deployment area. They have various purposes such as military, disaster relief, medical rescue, environmental monitoring, precision farming and manufacturing industry etc. Therefore, technologies for data maintaining technologies in sensor network environment is one of essential parts of sensor networks. In this paper, we present the essential particulars about data management technology at wireless sensor network environments and propound the issues. Further, we could organize and develop a systematic approach in solving the issues.

• KIPS Transactions on Computer and Communication Systems
• /
• v.8 no.12
• /
• pp.297-304
• /
• 2019

The technological advances such as communication, sensor, and artificial intelligence lead smart factory construction. Smart factory aims at efficient process control by utilizing data from the existing automation process and intelligence technology such as machine learning. As a result of constructing smart factory, productivity increases, but costs increase. Therefore, small companies try to make a step-by-step transition from existing process to smart factory. In this paper, we have proposed a remote control system that support data collection, monitoring, and control for manufacturing equipment to support the construction of CNC cutting machine based small-scale smart factory. We have proposed the structure and design of the proposed system and efficient sensing data transmission scheme. To check the feasibility, the system was implemented for CNC cutting machine and functionality verification was performed. For performance evaluation, the web page access time was measured. The results means that the implemented system is available level.

• KIPS Transactions on Computer and Communication Systems
• /
• v.4 no.5
• /
• pp.161-170
• /
• 2015

This research aims to propose new direction of mobile collaborative service by supplying functional supports which surpass data resource in smart devices. In this paper, we present Smart Collaboration Service Model that supports two types of collaboration, so called Supplying Collaboration and Sharing Collaboration. This model is a platform for supporting the resources as follows; sharing of data contact in other devices and supplying of special functions, like camera operation and picture transmission from other devices. To show its applicability, a prototype of Smart Collaboration Service Model has been implemented in the Android application for exchanging contact data and renting camera function. We expect that Smart Collaboration Service Model is to help the emergence for a new type of collaboration service. Also, user can reduces resource wastes for device as well as form personal smart space by utilizing all devices owned.

• The KIPS Transactions:PartC
• /
• v.17C no.2
• /
• pp.189-196
• /
• 2010

The LEACH does not use flooding method for data transmission and this makes low power consumption. So performance of the WSN is increased. On the other hand, QoS based algorithm which use restricted flooding method in WSN also achieves low power consuming rate by reducing the number of nodes that are participated in routing path selection. But when the data is delivered to the sink node, the LEACH choose a routing path which has a small hop count. And it leads that the performance of the entire network is worse. In the paper we propose a QoS based energy efficient clustering and routing algorithm in WSN. I classify the type of packet with two classes, based on the energy efficiency that is the most important issue in WSN. We provide the differentiated services according to the different type of packet. Simulation results evaluated by the NS-2 show that proposed algorithm extended the network lifetime 2.47 times at average. And each of the case in the class 1 and class 2 data packet, the throughput is improved 312% and 61% each.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1133-1144
• /
• 2021

Zero-copy is a technology that is also called no-memory copy, and through its use, context switching between the user space and the kernel space can be reduced to minimize the load on the CPU. However, this technology is only used to transmit small random files, and has not yet been widely used for large file transfers. This paper intends to discuss the practical application of zero-copy in processing large files via a network. To this end, we first developed a small test bed and program that can transmit and store data based on zero-copy. Afterwards, we intend to verify the usefulness of the applied technology in detail through detailed performance evaluation