• Journal of the Institute of Convergence Signal Processing
• /
• v.24 no.2
• /
• pp.112-118
• /
• 2023

Internet of Things(IoT) technology is developing to a stage where the Internet and objects are connected and objects themselves analyze and judge data to interconnect the real world and the virtual world in real time. This technology consists of sensors, actuators, devices, and networks, and it is being applied in various fields. As the number of IoT devices and applications increases, data traffic also increases. In this paper, a messaging system is designed and implemented in order to analyze the performance between an IoT device and MQTT broker. The experimental was performed to measure MQTT-based round-trip time and message transmission time between the IoT device and the broker. The result shows that there is no packet loss, and propagation delay affects round-trip time.

• KIPS Transactions on Computer and Communication Systems
• /
• v.1 no.1
• /
• pp.29-34
• /
• 2012

Wireless multicast service can be used for video streaming service to save the network resources by sending the same popular multimedia contents to a group of users at once. For better multimedia streaming multicast service, we propose a quality-aware rate adaptation (QARA) scheme for scalable video multicast in rate adaptive wireless networks. In QARA, transmission rate is determined depending on the content's type and users' channel conditions. First, the base layer is transmitted by a low rate for high reliability. That means we provide basic service quality to all users. On the contrary, the transmission rate for enhancement layer is adapted by using channel condition feedback from a randomly selected node. So, the enhancement layer frames in a multimedia content is sent with various transmission rates. Therefore, each node can be provided with differentiated quality services. Consequently, QARA is capable of serving heterogeneous population of mobile nodes. Moreover, it can utilize network resources more efficiently. Our simulation results show that QARA outperforms utilization of the available transmission rate and reduces the data transmission time.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.780-783
• /
• 2009

The application of MOST150 technology has been required to satisfy the demand for the automotive infotainment system and the higher bandwidth requirements caused by the increase of the multimedia processing capacity. The Ethernet technology applied gateway was implemented for an efficient transmission of multimedia, a vehicle diagnosis, an external communication, a data processing between the MOST150 and the CAN communication method applied to many existing vehicles. The new algorithm and application were suggested in order to efficiently perform the data processing between other types of communication systems. The existing MOST150 frame is mainly composed of the Control Channel, the Legacy Packet Channel(async) and the Synchronous /Isochronous Channels and performs the data processing through these sequential channels. With the sense of this process, this study suggested the new algorithm that the Mapping method of the IETF's QoS Management was applied to the MOST150 technology for the efficient QoS.

• Journal of the Institute of Convergence Signal Processing
• /
• v.23 no.2
• /
• pp.91-96
• /
• 2022

At the current camera-based technology level, sensor-based basic life pattern recognition technology has to suffer inconvenience to obtain accurate data, and commercial band products are difficult to collect accurate data, and cannot take into account the motive, cause, and psychological effect of behavior. the current situation. In this paper, radar technology for life pattern recognition is a technology that measures the distance, speed, and angle with an object by transmitting a waveform designed to detect nearby people or objects in daily life and processing the reflected received signal. It was designed to supplement issues such as privacy protection in the existing image-based service by applying it. For the implementation of the proposed system, based on TI IWR1642 chip, RF chipset control for 60GHz band millimeter wave FMCW transmission/reception, module development for distance/speed/angle detection, and technology including signal processing software were implemented. It is expected that analysis of individual life patterns will be possible by calculating self-management and behavior sequences by extracting personalized life patterns through quantitative analysis of life patterns as meta-analysis of living information in security and safe guards application.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.1107-1111
• /
• 2005

The DVR system realization with watermarking and MPEG-4 for real time processing speed improvement is presented in this paper. For the real time processing the system is used the DSP processor, Quick DMA for data transmission, watermarking for security and MPEG-4 compression for facility. The algorithms are that the operational structure has the internal memory of processor, and the optimal realization is suitable to form the DSP processor structure r processed for the iterative operations. The experimental result shows the real time processing is improved 12% over for the D1 image in comparison with the other system.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.1
• /
• pp.27-32
• /
• 2002

In this study, we fabricated the advanced telemetry system that transmitting media use radio frequency(RF) for the middle range measurement of the physiological signals and receiving media use optical for electromagnetic interference problem. The telemetry system within a size of 65$\times$125$\times$45mm consists of three parts: RF transmitter, optical receiver and physiological signal processing CMOS one chip. Advantages of proposed telemetry system is wireless middle range(50m) FM transmission, reduce electromagnetic interference to a minimum which enables a comfortable bed-side telemetry system. The monitoring system was designed in the structure of dual-processor for the real time processing. The use of the one channel in our study made it possible the real time wavelet transformation of electrocardiogram data of 360Hz, 16 bits for every 1.42 seconds.

• Journal of Platform Technology
• /
• v.10 no.2
• /
• pp.3-9
• /
• 2022

In this paper, to maximize the performance of the scatter communication in multi-core and many-core processors, a technique that considers the communication situation of the processing node is applied to a multi-core processor composed of 32 processing nodes. Since the existing scatter algorithm cannot recognize the communication conditions of the processing nodes, communication is generally performed according to an initially set transmission order. In this case, scatter communication starts only after the communication currently being performed by all processing nodes inside the processor is finished. The scatter communication performance was improved by this technique, and it was confirmed that there was a performance improvement of up to 78.93% compared to the existing algorithm through BFM simulation.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.11
• /
• pp.23-30
• /
• 2013

In this paper, we propose pre-arrangement based task scheduling scheme to reduce MapReduce job processing time. If a task and data to be processed do not locate in same node, the data should be transmitted to node where the task is allocated on. In that case, a job processing time increases owing to data transmission time. To avoid that case, we schedule tasks into two steps. In the first step, tasks are sorted in the order of high data locality. In the second step, tasks are exchanged to improve their data localities based on a location information of data. In performance evaluation, we compare the proposed method based Hadoop with a default Hadoop on a small Hadoop cluster in term of the job processing time and the number of tasks sorted to node without data to be processed by them. The result shows that the proposed method lowers job processing time by around 18%. Also, we confirm that the number of tasks allocated to node without data to be processed by them decreases by around 25%.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.3
• /
• pp.75-87
• /
• 2011

Tactical Data Links are standardized radio communication data links for military armed forces and used to transmit and receive data. Because they are the core elements of achieving information superiority in a NCW environment, various kinds of TDL are used by the Korean armed forces. Operating various types of TDL is very helpful in getting more information; however, at the same time, it is hard to integrate and make them co-operate with other TDLs or C4ISR systems. In this paper, we propose a XML based messaging system to make various types of TDL interoperable in a NCW environment. For the messaging system between TDL and C4ISR systems, we define XML message processing interfaces and suggest binary XML for serialization to save transmission loads over constrained military communication bandwidth. Our experiment results show that the TDL message can be transformed into generalized XML data that is interoperable with other TDLs and binary XML serialization, and it saves parsing and transmission time.

• Journal of The Korean Society For Urban Railway
• /
• v.6 no.4
• /
• pp.233-241
• /
• 2018

Recently, integrated railway safety monitoring and control system, which is a convergence system based on data distribution service for railway safety monitoring and control, is under development. It collects safety data of vehicle, signal, power and safety monitoring facilities in real time and adopts communication middleware based on distributed service for mass data processing. However, in the case of a server device used as an existing control server, the performance of the distributed service middleware can not be exhibited due to low hardware performance due to safety reasons. In the safety control system, 200,000 packets per second were set as the transmission target, but the performance test of the LAB was not satisfied. In this paper, we analyze the characteristics of railway data to improve the data collection performance of existing equipment and apply DDS-based streaming transmission method to the data model of signal facilities and vehicle facilities with large packet amount according to the analysis result. As a result, it was confirmed that the throughput was improved about 30.4 times when the hardware performance was the same. We plan to improve the data processing performance by applying it to real-time railway safety integrated monitoring and control system in the future.