• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.6
• /
• pp.1069-1076
• /
• 2019

With the development of information and communication technology, the military's battle environment is changing greatly to network centric warfare in where weapon system is connected in a network and carries out mission by exchanging the real-time data. The core of the network centric warfare is Tactical Data Link(TDL) system, and subscribers of TDL exchange tactical information in real time through wireline, wireless and satellite network to share the battlefield situation. The amount of data sent and received through TDL inevitably increase as military's weapon systems equipped with TDL systems increase over time and the performance of communications equipment improves. This study proposes ways to improve the transmission speed and processing capacity of the TDL system by improving the Data Link Processor.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.2
• /
• pp.13-21
• /
• 2012

Mobile data caching is usually used as an effective way to improve the speed of local transaction processing and reduce server load. In mobile database environment, due to its characters - low bandwidth, excessive latency and intermittent network, caching is especially crucial. A lot of mobile data caching strategies have been proposed to handle these problems over the last few years. However, with smart phone widely application these approaches cannot support vast data requirements efficiently. In this paper, to make full use of cache data, lower wireless transmission quantity and raise transaction success rate, we design a new mobile data caching synchronization strategy based on in-demand and replacement priority. We experimentally verify that our techniques significantly reduce quantity of wireless transmission and improve transaction success rate, especially when mobile client request a large amount of data.

• The KIPS Transactions:PartC
• /
• v.18C no.5
• /
• pp.303-316
• /
• 2011

Data aggregation is important in wireless sensor networks. However, it also introduces many security problems, one of which is that a compromised node may inject false data or drop a message during data aggregation. Most existing solutions rely on encryption, which however requires high computation and communication cost. But they can only detect the occurrence of an attack without finding the attacking node. This makes sensor nodes waste their energy in sending false data if attacks occur repeatedly. Even an existing work can identify the location of a false data injection attack but it has a limitation that at most 50% of total sensor nodes can participate in data transmission. Therefore, a novel approach is required such that it can identify an attacker and also increase the number of nodes which participate in data transmission. In this paper, we propose a monitoring-based secure data aggregation protocol to prevent against a compromised aggregator which injects false data or drops a message. The proposed protocol consists of aggregation tree construction and secure data aggregation. In secure data aggregation, we use integration of abnormal data detection with monitoring and a minimal cryptographic technique. The simulation results show the proposed protocol increases the number of participating nodes in data transmission to 95% of the total nodes. The proposed protocol also can identify the location of a compromised node which injects false data or drops a message. A communication overhead for tracing back a location of a compromised node is O(n) where n is the total number of nodes and the cost is the same or better than other existing solutions.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.4
• /
• pp.328-336
• /
• 2004

Recently a mobile service is changing into a system environment that offers the customer various contents service. Representative example of service is a Calling Identity Del ivory Service(CID). Such service has the problem in the case which the receiver cannot remember the phone number of the sender; it has a difficult problem that cannot easily confirm whose the phone number it is. Therefore, it is desirable to design and implement visual services that can enhance the recognition of users. In this paper, we propose the architecture that is similar to a Calling Identity Delivery Service. We propose the architecture for communication service and system that is able to visually display the information of the sender using 2D image data in mobile environment. After that we set the image information to represent the user and this method is able to visually display the information of the sender by transmitting an image data through channels from switch station or base station using the server. When the receiver receives a phone call from the sender, this method provides an efficient service by transmitting visual data with bell sound. That is, the image information of sender is appeared on liquid crystal display(LCD) of the receiver at the same time. We investigate the concepts for processing real-time transmission of image data and describe an example of the implementation result that is based on system. This technology has a potential influence on the marketing and presents an efficiency of this method.

• Journal of Radiation Protection and Research
• /
• v.28 no.3
• /
• pp.255-261
• /
• 2003

An environmental radiation monitoring system based on high pressurized ionization chamber has been used for on-line gamma monitoring surrounding the KAERI (Korea Atomic Energy Research Institute), which transmits the dose data measured from ion chamber on the site via radio frequency to a central processing computer and stores the transmitted real-time data. Although communication using radio frequency has several advantages such as effective and economical transmission, storage, and data process, there is one main disadvantage that data loss during transmission often happens because of unexpected communication problems. It is possible to restore the loss data by off-line such as floppy disk but the simultaneous process and display of current data as well as the backup data are very difficult in the present on-line system. In this work, a new electronic circuit board and the operation software applicable to the conventional environmental radiation monitoring system are developed and the automatical synchronization of the ion chamber unit and the central processing computer is carried out every day. This system is automatically able to restore the backup data within 34 hours without additional equipments and also display together the current data as well as the transmitted backup data after checking time flag.

• Communications of the Korean Institute of Information Scientists and Engineers
• /
• v.4 no.1
• /
• pp.16-25
• /
• 1986

Data communication is the transmission of coded information between terminals and computers or between multiple computers. A large, complex, and geographically dispersed present industrial society requires processing of real-time inputs that must be collected from many different locations and production of real-time outpts that must be distributed to many defferent locations. As one of many alternatives to meet the above requirement, a data communication system can be used.

• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.1
• /
• pp.1-10
• /
• 2006

To reduce the complexity of video transcoder, transcoding techniques generally use intermediate data such as macroblock types, motion vectors, DCT coefficients, which are extracted from incoming video bitstream. In this Paper, we Propose a new adaptive INTRA update scheme utilizing the importance of each macroblock in a given frame. The importance measure is calculated from the motion vectors which are extracted from the decoding procedure of a incomming video data.'rho ratio of the macroblock to be referred by the next frame is calculated by the motion vectors of the next frame and the macroblocks to be refered higher ratio has more effect on the next frame and the followed frames. The proposed scheme can obtain transcoded bitstreams which has better image quality and more improved resilience against transmission errors.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.05a
• /
• pp.94-97
• /
• 2022

The emerging energy harvesting technology, which has been successfully integrated into Wireless Sensor Networks, enables sensor batteries to be charged using renewable energy sources. In the meantime, the problem of Minimum Latency Aggregation Scheduling (MLAS) in battery-powered WSNs has been well studied. However, because sensors have limited energy harvesting capabilities, captured energy is limited and varies greatly between nodes. As a result, all previous MLAS algorithms are incompatible with Battery-Free Wireless Sensor Networks (BF-WSNs). We investigate the MLAS problem in BF-WSNs in this paper. To make the best use of the harvested energy, we build an aggregation tree that leverages the energy harvesting rates of the sensor nodes with an intuitive explanation. The aggregation tree, which determines sender-receiver pairs for data transmission, is one of the two important phases to obtain a low data aggregation latency in the BF-WSNs.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.564-566
• /
• 2005

The relation between HPA (High Power Amplifier) and COMS (Communication Ocean Meteorological Satellite) multi-carrier is analyzed in this paper. MODAC (Meteorological and Ocean Data Application Center) has a primary mission to transmit processed data, HRIT (High Rate Information Transmission) and LRIT (Low Rate Information Transmission), which is normalized and calibrated by pre-processing. It is also replaced with the SOC (Satellite Operation Center) in emergency case and can transmit the command and ranging tones for operation of COMS. From the result of simulation with modelled HPA, it is found that the multi-carrier in one HPA can give rise to an inter-modulation which makes harmonic and spurious elements increase in-band. Under the environment of these increased parasitic elements, the degradation of multi-carrier's quality is estimated from the ratio of the amount of noise to total output power of HPA.

• The KIPS Transactions:PartC
• /
• v.17C no.6
• /
• pp.485-490
• /
• 2010

IEEE 802.11n supports two frame aggregation schemes, aggregation for MAC service data unit (A-MSDU) and aggregation for MAC protocol data unit (A-MPDU), to improve throughput at the MAC layer. In this paper, we propose a cooperative frame aggregation (CoFA), which can recover erroneous frames in a cooperative manner based on A-MPDU. Specifically, CoFA receive multiple frames from direct and relay paths, and combined multiple frames jointly. Numerical results show that CoFA outperforms direct transmission and relay transmission over diverse channel conditions.