• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.8
• /
• pp.77-84
• /
• 2005

The considerations for reminder life of transmission line is gradually higher. It is requisite for investigation of ACSR life to test tensile load of ACSR as a fundamental data. It is vary important to analysis correlations between results of tensile load testing and elapsed years. Estimation of ACSR life can be obtained by statistics processing using mechanical experimental results. It is a general method to use regression analysis as a statistics processing technique. In this paper, we did experiment on tensile strength of ACSR by using a new and due to flame for artificial fire, and gathering due to a flame. The limit of life estimation is decided by basic line using twenty percentage reduction of rate tensile strength. This basic line is like to results of Canada Ontario Hydro-research. There are $480[mm^2]$ ACSR which are experimented on this study.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.04b
• /
• pp.1483-1486
• /
• 2002

Multicast protocols are efficient methods of group communication, but they do not support the various transmission protocol services like a reliability guarantee, FTP, or Telnet that TCPs do. The purpose of this dissertation is to find a method to utilize sewer routers to form multicasts that can simultaneously transport multicast packets and TCP packets. For multicast network scalability and error recovery the existing SRM method has been used. Three packets per TCP transmission control window size are used for transport and an ACK is used for flow control. A CBR and a SRM is used for UDP traffic control. Divided on whether a UDP multicast packet and TCP unicast packet is used simultaneously or only a UDP multicast packet transport is used, the multicast receiver with the longest delay is measured on the number of packets and its data receiving rate. It can be seen that the UDP packet and the TCP's IP packet can be simultaneously used in a server router.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.1 no.2
• /
• pp.137-143
• /
• 1997

From now on, the network is being developed into PSTN(public switched telephone network) and PDN(public data network), that is depend on the form of data. The former one pursues sending voice, and the latter one pursues sending data. But it causes big loss of the economy and efficiency. So, ISDN, processing voice and data at same time, gives a big profit to user. To enlarge the ISDN at the narrow area, it is necessary that study to send the mixture form of voice and data in LAN environment. So, this paper proposes the algorithm about the mixture form of voice and data in ethernet and token-ring. that is widely used in these days.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.515-519
• /
• 2004

A Propeller-Anemometer is an instrument used specifically, to measure the wind speed. The accurate measurement of the wind speed is vitally important such required by any weather stations. In this research, the measurand of the instrumentation was the rotational speed of the propeller and the instrumentation result or output data was wind velocity. The speed measured was recorded digitally in the computer by using specific software. A specific sensor used to measure a variable by converting information of the variable (rotational speed of the propeller) into a dependent signal such as electrical signal in form of voltage. The development of Propeller-Anemometer involved few sets of instrumentation process and equipment. It included three major parts, mechanical, electronics and computer. The main instrumentation processes were physical and signal interfacing, signal conditioning, logic interfacing, data transmission to computer and processing the data. Generally, this paper presents the overall concept and design of Propeller-Anemometer Instrumentation. However, an emphasis was mainly in designing and building the interfacing system, hardware and software. Basically, for the first phase of the development, this project designed and built the RS232 terminal using Peripheral Interface Controller (PIC), PIC16F873. The hardware can be interfaced to computer or other compatible devices. This routine converted input voltage from the circuit to speed (velocity) and transmitted them afterwards to the target device by using the RS232 transmission protocol. This implementation implied a computer display as visual interface. For the purpose of this paper, RS232 data transmission was carried out using a Microsoft Visual Basic software routine.

• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.1
• /
• pp.45-50
• /
• 2013

Sensors have limited resources in sensor networks, so efficient use of energy is important. Representative clustering methods, LEACH, LEACHC, TEEN generally use direct transmission methods from cluster headers to a sink node to pass collected data. If clusters are located at a long distance from the sink node, the cluster headers exhaust a lot of energy in order to transfer the data. As a consequence, the life of sensors is shorten and re-clustering is needed. In the process of clustering, sensor nodes consume some energy and the energy depletion of the cluster headers meet another energy exhaustion. A method of transferring data from cluster headers to the sink using neighbor clusters is needed for saving energy. In this paper, we propose a novel routing method using a multi-hop transmission method in cluster sensor networks. This method uses the topology matrix which presents cluster topology. One-hop routing and two-hop routing are proposed in order to increase the energy efficiency.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.4
• /
• pp.274-280
• /
• 2011

Due to their rapid growth and new paradigm applications, wireless sensor networks(WSNs) are morphing into low power personal area networks(LoWPANs), which are envisioned to grow radically. The fragmentation and reassembly of IP data packet is one of the most important function in the 6LoWPAN based communication between Internet and wireless sensor network. However, since the 6LoWPAN data unit size is 102 byte for IPv6 MTU size is 1200 byte, it increases the number of fragmentation and reassembly. In order to reduce the number of fragmentation and reassembly, this paper presents a new scheme that can be applicable to 6LoWPAN. When a fragmented packet header is constructed, we can have more space for data. This is because we use 8-bits routing table ill instead of 16-bits or 54-bits MAC address to decide the destination node. Analysis shows that our design has roughly 7% or 22% less transmission number of fragmented packets, depending on MAC address size(16-bits or 54-bits), compared with the previously proposed scheme in RFC4944. The reduced fragmented packet transmission means a low power consumption since the packet transmission is the very high power function in wireless sensor networks. Therefore the presented fragmented transmission scheme is well suited for low-power wireless sensor networks.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.9
• /
• pp.691-698
• /
• 2006

TCP/IP Offload Engine (TOE) is a technology that processes TCP/IP on a network adapter instead of a host CPU to reduce protocol processing overhead from the host CPU. There have been some approaches to implementing TOE: software TOE based on an embedded processor; hardware TOE based on ASIC implementation; and hybrid TOE in which software and hardware functions are combined. In this paper, we designed software modules and hardware modules for a hybrid TOE on an FPGA that had two processor cores. Software modules are based on the embedded Linux. Hardware modules are for data transmission (TX) and reception (RX). One core controls the TX path and the other controls the RX path of the Linux. This TX/RX path separation mechanism can reduce task switching overheads between processes and overcome poor performance of single embedded processor. Hardware modules deal with creating headers for outgoing packets, processing headers of incoming packets, and fetching or storing data from or to the host memory by DMA. These can make it possible to improve the performance of data transmission and reception. We proved performance of the TOE with separated transmission and reception paths by performing experiments with a TOE network adapter that was equipped with the FPGA having processor cores.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.2
• /
• pp.117-126
• /
• 2012

This paper provides a method for compression transmission of on-chip bus data. As the data traffic on on-chip buses is rapidly increasing with enlarged video resolutions, many video processor chips suffer from a lack of bus bandwidth and their IP cores have to wait for a longer time to get a bus grant. In multimedia data such as images and video, the adjacent data signals very often have little or no difference between them. Taking advantage of this point, this paper develops a simple bus data compression method to improve the chip performance and presents its hardware implementation. The method is applied to a Video Codec - 1 (VC-1) decoder chip and reduces the processing time of one macro-block by 13.6% and 10.3% for SD and HD videos, respectively

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.6
• /
• pp.1386-1396
• /
• 1996

In the distributed multimedia application, high throughput and low delay is one of the most important QoS(Quality of Service) requirement. Emerging high speed communication offers transmission rate above Gbps, but it can not be utilized efficiently by the performance bottlenecks of communication protocols. To overcom the problem, we propose a horizontal processing architecture that processes data as soon as it arrive from the network. Unfortunately, the OSI protocol stack often imposes ordering constraints that prevent concurrent processing of the protocol layers. By using a fixed packet format, the network layer through the presentation layer are processed in parallel. Our prototype shows that the proposed model has performance improvement up to 61% more advantage than the conventional approach.

• Journal of KIISE:Computing Practices and Letters
• /
• v.5 no.6
• /
• pp.793-800
• /
• 1999

TMN Agent Platform은 망 요소의 운영상태와 자원들을 GDMO에 따라 관리객체(Managed Object : MO)로 모델링 하고, 자원들의 현재 상태를 유지하며, 관리자(Manager)로부터의 망 관리 기능 요구에 따라 조작된다. 그러므로, 에이전트의 성능향상은 전체적인 통신망 관리의 성능향상에 직접적인 영향을 미친다.본 논문에서는 TMN 에이전트의 기능요구 사항을 분석하고, 이를 토대로 성능향상을 위해 멀티스레드 기법을 사용하는 병렬 처리 구조의 TMN Agent Platform의 기능구조를 제시한다. 또한 에이전트와 다양한 자원들간의 효율적인 메시지전달을 위한 체계를 제시하며, 구현된 TMN Agent Platform의 성능을 분석한다.Abstract TMN Agent manages the operational status and real-resources of network elements, such as switching nodes and transmission systems. It performs the requested management functions from manager and maintains consistent status data of real-resource. The performance of agent system affects directly the performance of network management operation. If the agent is implemented by sequential processing scheme with single process, the agent processing can be delayed or blocked according to the status of real-resources. This problem can be solved by parallel and distributed processing scheme.To improve the processing performance of TMN Agent, we propose a TMN Agent Platform's functional architecture that is based on parallel processing with multi-tread and effective message transferring scheme between agent and various real-resource. We analyze the performance of the implemented TMN Agent Platform.