• 제목/요약/키워드: Data Storage System

검색결과 2,012건 처리시간 0.027초

L, C, X-밴드 다편파 레이더 산란계를 이용한 논 벼 생육인자 추정 (Estimation of Paddy Rice Growth Parameters Using L, C, X-bands Polarimetric Scatterometer)

  • 김이현;홍석영;이훈열
    • 대한원격탐사학회지
    • /
    • 제25권1호
    • /
    • pp.31-44
    • /
    • 2009
  • 본 연구에서는 다편파 산란계 시스템을 이용하여 얻어진 후방산란계수의 연중 변화를 편파와 입사각에 따라 알아보고 벼 생육인자와의 관계를 통하여 생육인자를 추정하고자 하였다. 2007년도 국립농업과학원 시험포장에 다편파산란계 시스템(L, C, X-band 안테나, 네트워크분석기, RF cable, 입사각 $20^{\circ}{\sim}60^{\circ}$)을 제작 구축하고 벼 이앙기에서 수확기까지 산란특성을 주기적으로 관측하였으며 레이더 방정식을 이용하여 후방산란계수를 계산하여 자료 분석에 사용하였다. 모든 안테나 밴드에서 벼 생육초기(5월말$\sim$6월초)에는 VV-편파가 HH-, HV-편파보다 후방산란계수가 높게 나타났다. C-band의 경우 모든 입사각에서 벼가 자라면서 HH-편파 후방산란계수가 증가하다가 출수기(8월중순경)에 가장 높았고 그 이후 감소하는 경향이었다. X-band는 모든 편파의 후방산란계수가 벼 유수형성기(7월말경)까지 증가하다가 그 후 감소하였으며 등숙기인 9월 중순 이후 다시 증가하는 dual-peak 현상을 보였는데, 특히 VV-편파의 경우 9월 초순부터 후방산란계수 종가가 다른 편파에 비해 크게 나타났다. 파장별 밴드, 편파, 입사각도별 후방산란계수와 작물 생육과의 관계를 분석한 결과 L-band는 바이오매스와의 상관이 높게 나타났고 C-band에서는 엽면적지수와 초장과의 상관이 높게 나타났으며 X-band는 이삭 건물중과 상관이 높게 나타났다 후방산란계수를 이용하여 생육을 추정할 수 있는 회귀식을 작성하고 실측값과의 비교를 통하여 작물 생육 추정을 위한 최적 조건을 구명하였다.

지하수내 갈색 부유/침전 물질의 생성 반응에 관한 평형 및 반응속도론적 연구: 적정 양수 기법 및 탁도 제거 방안에 대한 제안 (Geochemical Equilibria and Kinetics of the Formation of Brown-Colored Suspended/Precipitated Matter in Groundwater: Suggestion to Proper Pumping and Turbidity Treatment Methods)

  • 채기탁;윤성택;염승준;김남진;민중혁
    • 대한지하수환경학회지
    • /
    • 제7권3호
    • /
    • pp.103-115
    • /
    • 2000
  • 갈색 침전물의 생성은 우리나라 지하수의 개발 및 공급에 있어 흔히 발생하는 문제 중의 하나인데, 이에 따라 색도, 맛, 탁도 및 용존 철 함량 등의 항목에 있어 먹는 물 수질 기준을 초과하게 되고, 물 공급 시스템에 스케일링의 문제를 야기하게 된다. 경기도 파주 지역 지하수의 경우에도 양수 후 몇 시간 내에 갈색 침전물이 형성되어 수질을 악화시키고 있다. 본 연구에서는 지하수의 탁도를 유발하는 원인과 지화학적 반응 경로를 이해하고자, 평형열역학 및 반응속도론적 접근을 통하여 갈색 침전물의 형성과정을 파악하였다. 본 연구결과는 침전물의 형성을 최소화하기 위한 적정 양수 기법은 물론 수질 향상을 위한 최적 수처리 기법을 설계하는데 있어 중요한 자료로 활용될 것이다. 파주 지역의 암반 지하수는 물/암석(편마암)반응에 의해 Ca-$HCO_3$형의 수질 특성을 보인다. SEM-EDS 및 XRD 분석 결과, 갈색 침전물은 비정질의 함철 산화물 또는 수산화물로 해석된다. 다양한 공극 크기(6, 4, 1, 0.45, 0.2 $\mu\textrm{m}$)를 갖는 여과지를 이용한 다단계 여과 결과, 이들 침전물은 크기에 있어 대부분 1 내지 0.45$\mu\textrm{m}$의 입도를 갖는 콜로이드 형태이지만, 질량 분포로 볼 때는 1 내지 6$\mu\textrm{m}$범위가 우세함(총 질량의 약 81%)을 알 수 있다. 다량의 용존 철(II)은 지하수 유동 중에 철 함량이 높은(최대 3wt.%) 단층 파쇄암 내의 녹니석(clinochore)의 용해로부터 기원하는 것으로 판단된다. PHREEQC 프로그램을 이용한 포화지수 계산 및 pH-Eh 관계도에 대한 검토 결과, 침전물은 함철 수산화물임이 확인되며, 환원 조건에 있던 심부 지하수가 양수에 의해 산소에 노출되면서 화학성 변화(특히, 산화)에 의하여 침전함을 알 수 있다. 양수 이후의 시간 경과와 더불어 양수된 지하수의 pH, DO, 알칼리도는 점차 감소하며. 탁도는 증가하다가 일정 시간 경과 후 감소하는 경향을 보인다. 양수 이후의 경과 시간에 따른 용존 철(II)의 농도 감소율(즉, 반응 속도)은 Fe(II)=10.l exp(-0.0009t)로 표현된다. 따라서 갈색 침전물의 생성 반응은 양수 및 양수 후 저장 과정 중에 산소의 유입에 따른 산화 반응에 기인하며, 그 반응은 시간, 산소분압 및 pH에 의존함을 알 수 있다. 탁도를 제거하여 음용 가능한 수질을 확보하기 위해서는, 충분한 시간 동안 충분한 크기를 갖는 탱크 내에서의 다단계 저장 및 폭기를 거친 이후에 응집된 침전물에 대한 여과가 제안된다. 이때, 비용 절감 차원에서 상이한 입도 조건에서의 다단계 여과가 효과적일 것으로 생각된다. 한편, 개발 관정 내에서의 스케일링을 최소화하기 위해서는 심부 지하수로 산소가 풍부한 천층 지하수가 유입되는 과정을 최소화할 필요가 있다. 이를 위해서는 적정 채수량 범위 내에서의 지속적인 양수가 효과적일 것이다. 아울러, 산소가 풍부한 천층 지하수의 채수를 위한 별도의 관정 설치도 고려할 수 있을 것이다.

  • PDF

태양에너지를 이용한 곡물건조시스템의 시뮬레이션에 관한 연구 (Simulation of Drying Grain with Solar-Heated Air)

  • 금동혁;김용운
    • Journal of Biosystems Engineering
    • /
    • 제4권2호
    • /
    • pp.65-83
    • /
    • 1979
  • Low-temperature drying systems have been extensively used for drying cereal grain such as shelled corn and wheat. Since the 1973 energy crisis, many researches have been conducted to apply solar energy as supplemental heat to natural air drying systems. However, little research on rough rice drying has been done in this area, especially very little in Korea. In designing a solar drying system, quality loss, airflow requirements, temperature rise of drying air, fan power and energy requirements should be throughly studied. The factors affecting solar drying systems are airflow rate, initial moisture content, the amount of heat added to drying air, fan operation method and the weather conditions. The major objectives of this study were to analyze the effects of the performance factors and determine design parameters such as airflow requirements, optimum bed depth, optimum temperature rise of drying air, fan operation method and collector size. Three hourly observations based on the 4-year weather data in Chuncheon area were used to simulate rough rice drying. The results can be summarized as follows: 1. The results of the statistical analysis indicated that the experimental and predicted values of the temperature rise of the air passing through the collector agreed well. 2. Equilibrium moisture content was affected a little by airflow rate, but affected mainly by the amount of heat added, to drying air. Equilibrium moisture content ranged from 12.2 to 13.2 percent wet basis for the continuous fan operation, from 10.4 to 11.7 percent wet basis for the intermittent fan operation respectively, in range of 1. 6 to 5. 9 degrees Centigrade average temperature rise of drying air. 3. Average moisture content when top layer was dried to 15 percent wet basis ranged from 13.1 to 13.9 percent wet basis for the continuous fan operation, from 11.9 to 13.4 percent wet basis for the intermittent fan operation respectively, in the range of 1.6 to 5.9 degrees Centigrade average temperature rise of drying air and 18 to 24 percent wet basis initial moisture content. The results indicated that grain was overdried with the intermittent fan operation in any range of temperature rise of drying air. Therefore, the continuous fan operation is usually more effective than the intermittent fan operation considering the overdrying. 4. For the continuous fan operation, the average temperature rise of drying air may be limited to 2.2 to 3. 3 degrees Centigrade considering safe storage moisture level of 13.5 to 14 perceut wet basis. 5. Required drying time decrease ranged from 40 to 50 percent each time the airflow rate was doubled and from 3.9 to 4.3 percent approximately for each one degrees Centigrade in average temperature rise of drying air regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on required drying time. 6. Required drying time increase ranged from 18 to 30 percent approximately for each 2 percent increase in initial moisture content regardless of the fan operation methods, in the range of 18 to 24 percent moisture. 7. The intermittent fan operation showed about 36 to 42 percent decrease in required drying time as compared with the continuous fan operation. 8. Drymatter loss decrease ranged from 34 to 46 percent each time the airflow rate was doubled and from 2 to 3 percent approximately for each one degrees Centigrade in average temperature rise of drying air, regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on drymatter loss. 9. Drymatter loss increase ranged from 50 to 78 percent approximately for each 2 percent increase in initial moisture content, in the range of 18 to 24 percent moisture. 10. The intermittent fan operation: showed about 40 to 50 percent increase in drymatter loss as compared with the continuous fan operation and the increasing rate was higher at high level of initial moisture and average temperature rise. 11. Year-to-year weather conditions had a little effect on required drying time and drymatter loss. 12. The equations for estimating time required to dry top layer to 16 and 1536 wet basis and drymatter loss were derived as functions of the performance factors. by the least square method. 13. Minimum airflow rates based on 0.5 percent drymatter loss were estimated. Minimum airflow rates for the intermittent fan operation were approximately 1.5 to 1.8 times as much as compared with the continuous fan operation, but a few differences among year-to-year. 14. Required fan horsepower and energy for the intermittent fan operation were 3. 7 and 1. 5 times respectively as much as compared with the continuous fan operation. 15. The continuous fan operation may be more effective than the intermittent fan operation considering overdrying, fan horsepower requirements, and energy use. 16. A method for estimating the required collection area of flat-plate solar collector using average temperature rise and airflow rate was presented.

  • PDF

태양에너지를 이용한 곡물건조시스템의 시뮬레이션에 관한 연구 (Simulation of Drying Grain with Solar-Heated Air)

  • 금동혁
    • Journal of Biosystems Engineering
    • /
    • 제4권2호
    • /
    • pp.64-64
    • /
    • 1979
  • Low-temperature drying systems have been extensively used for drying cereal grain such as shelled corn and wheat. Since the 1973 energy crisis, many researches have been conducted to apply solar energy as supplemental heat to natural air drying systems. However, little research on rough rice drying has been done in this area, especially very little in Korea. In designing a solar drying system, quality loss, airflow requirements, temperature rise of drying air, fan power and energy requirements should be throughly studied. The factors affecting solar drying systems are airflow rate, initial moisture content, the amount of heat added to drying air, fan operation method and the weather conditions. The major objectives of this study were to analyze the effects of the performance factors and determine design parameters such as airflow requirements, optimum bed depth, optimum temperature rise of drying air, fan operation method and collector size. Three hourly observations based on the 4-year weather data in Chuncheon area were used to simulate rough rice drying. The results can be summarized as follows: 1. The results of the statistical analysis indicated that the experimental and predicted values of the temperature rise of the air passing through the collector agreed well.2. Equilibrium moisture content was affected a little by airflow rate, but affected mainly by the amount of heat added, to drying air. Equilibrium moisture content ranged from 12.2 to 13.2 percent wet basis for the continuous fan operation, from 10.4 to 11.7 percent wet basis for the intermittent fan operation respectively, in range of 1. 6 to 5. 9 degrees Centigrade average temperature rise of drying air.3. Average moisture content when top layer was dried to 15 percent wet basis ranged from 13.1 to 13.9 percent wet basis for the continuous fan operation, from 11.9 to 13.4 percent wet basis for the intermittent fan operation respectively, in the range of 1.6 to 5.9 degrees Centigrade average temperature rise of drying air and 18 to 24 percent wet basis initial moisture content. The results indicated that grain was overdried with the intermittent fan operation in any range of temperature rise of drying air. Therefore, the continuous fan operation is usually more effective than the intermittent fan operation considering the overdrying.4. For the continuous fan operation, the average temperature rise of drying air may be limited to 2.2 to 3. 3 degrees Centigrade considering safe storage moisture level of 13.5 to 14 perceut wet basis.5. Required drying time decrease ranged from 40 to 50 percent each time the airflow rate was doubled and from 3.9 to 4.3 percent approximately for each one degrees Centigrade in average temperature rise of drying air regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on required drying time.6. Required drying time increase ranged from 18 to 30 percent approximately for each 2 percent increase in initial moisture content regardless of the fan operation methods, in the range of 18 to 24 percent moisture.7. The intermittent fan operation showed about 36 to 42 percent decrease in required drying time as compared with the continuous fan operation.8. Drymatter loss decrease ranged from 34 to 46 percent each time the airflow rate was doubled and from 2 to 3 percent approximately for each one degrees Centigrade in average temperature rise of drying air, regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on drymatter loss. 9. Drymatter loss increase ranged from 50 to 78 percent approximately for each 2 percent increase in initial moisture content, in the range of 18 to 24 percent moisture. 10. The intermittent fan operation: showed about 40 to 50 percent increase in drymatter loss as compared with the continuous fan operation and the increasing rate was higher at high level of initial moisture and average temperature rise.11. Year-to-year weather conditions had a little effect on required drying time and drymatter loss.12. The equations for estimating time required to dry top layer to 16 and 1536 wet basis and drymatter loss were derived as functions of the performance factors. by the least square method.13. Minimum airflow rates based on 0.5 percent drymatter loss were estimated.Minimum airflow rates for the intermittent fan operation were approximately 1.5 to 1.8 times as much as compared with the continuous fan operation, but a few differences among year-to-year.14. Required fan horsepower and energy for the intermittent fan operation were3. 7 and 1. 5 times respectively as much as compared with the continuous fan operation.15. The continuous fan operation may be more effective than the intermittent fan operation considering overdrying, fan horsepower requirements, and energy use.16. A method for estimating the required collection area of flat-plate solar collector using average temperature rise and airflow rate was presented.

고품질 스테레오 음악을 위한 오디오 워터마크 정보 삽입/추출 기술 (An Embedding /Extracting Method of Audio Watermark Information for High Quality Stereo Music)

  • 배경율
    • 지능정보연구
    • /
    • 제24권2호
    • /
    • pp.21-35
    • /
    • 2018
  • 본 논문에서는 스테레오 음악에 오디오 워터마크를 삽입하기 위한 알고리즘을 제안하였다. 스테레오 음악은 2개의 채널을 갖고 있기 때문에 기존 워터마킹 기술은 일반적으로 각 채널을 독립적으로 생각하고 처리하는 경우가 많다. 그러나 스테레오를 모노로 변환하는 과정에서 워터마크의 손실이 발생하는 경우가 많이 발생할 수 있다. 제안한 알고리즘은 스테레오를 모노로 변환하더라도 워터마크의 손실이 발생하지 않도록 워터마크를 삽입할 때 스테레오와 모노변환의 특성을 이용하였다. 제안된 알고리즘에 사용된 오디오 워터마크는 "Copyright"와 "Copy_free"라는 두 가지 정보를 터보코드를 이용하여 생성하였다. 두 워터마크는 9바이트(72비트)로 이루어져 있으며, 오류정정을 위하여 터보코드를 적용하면 222비트로 삽입해야 하는 정보량이 늘어난다. 222비트의 워터마크는 추가적인 오류에 강인하도록 1024비트로 확장하여 최종적으로 스테레오 음악에 삽입할 워터마크로 사용하였다. 평균적으로 SNR은 40dB를 넘어서서 전통적인 양자화 방식보다 10dB 이상의 음질 개선을 가져왔다. 이는 상대적으로 10배의 음질 개선도를 의미하는 것으로 매우 유의미한 결과이다. 또한 워터마크의 추출에 필요한 샘플길이는 1초 이내의 길이면 충분히 추출이 가능하고, 128Kbps의 비트레이트를 갖는 MP3 압축에 대해서도 모두 1초 이내 길이의 음악 샘플로부터 워터마크의 완전한 추출이 가능하였다. 전통적인 양자화 방식이 10초 길이의 샘플을 이용해도 대부분 워터마크의 추출에 실패한 것에 비하면 1/10에 불과한 길이로 워터마크의 추출이 가능하다.

벤로형 온실의 잉여 태양에너지 분석 (Analysis of Surplus Solar Energy in Venlo Type Greenhouse)

  • 최만권;신익수;윤성욱;김현태;윤용철
    • 생물환경조절학회지
    • /
    • 제22권2호
    • /
    • pp.91-99
    • /
    • 2013
  • 본 연구는 주간동안 온실 내에서 발생되는 잉여 태양에너지 축열 시스템 설계에 필요한 기초자료를 제공할 목적으로 확보한 표준기상년 데이터를 이용하여 벤로형 온실을 대상으로 잉여 태양에너지를 분석하였다. 파프리카의 경우, 지역별 난방부하는 제주, 진주 및 대관령지역에 대해 각각 약 1,107.8GJ, 1,010.0GJ 및 3,118.5GJ로 분석되었다. 잉여 태양에너지의 경우, 제주지역 1,845.4GJ, 진주지역 1,881.8GJ, 대관령지역은 2,061.8GJ로 나타나 대관령지역이 제주 및 진주지역에 비해 각각 11.7% 및 9.6% 정도 크게 나타났다. 국화의 경우, 지역별 난방부하는 제주지역 1,202.5GJ, 진주지역 1,042.0GJ, 대관령지역은 3,288.6GJ 정도인 것으로 분석되었으며 지역별 차이는 파프리카의 경우와 유사였다. 잉여 태양에너지는 제주, 진주 및 대관령지역에 대해 각각 1,435.2GJ, 1,536.2GJ, 및 1,734.6GJ로 나타나 대관령 지역이 제주 및 진주지역에 비해 각각 20.9% 및 12.9% 정도 크게 나타났다. 파프리카를 재배하는 경우가 국화에 비해 상대적으로 지역에 관계없이 난방에너지가 차지하는 비중은 적고 잉여 태양에너지는 많은 경향이 있음을 알 수 있다. 또한 대관령지역을 제외하면 잉여 태양에너지가 난방에 소요되는 에너지보다 많은 것을 알 수 있다. 소요 난방에너지는 지역 및 재배작물별로 다소 차이는 있지만, 오이가 일반적으로 많게 나타났으며, 그 다음으로 국화 및 파프리카 순이었다. 잉여 태양에너지는 대체적으로 파프리카, 오이 및 국화 순으로 많게 나타났다.

두께에 따른 이중 중합형 복합레진의 중합 (Polymerization of dual cured composites by different thickness)

  • 김윤주;진명욱;김성교;권태엽;김영경
    • Restorative Dentistry and Endodontics
    • /
    • 제33권3호
    • /
    • pp.169-176
    • /
    • 2008
  • 본 연구는 이중 중합형 복합레진에서 재료의 두께, 충전방법 및 중합방법에 따른 중합도를 미세경도 시험을 이용하여 측정하고자 하였다. 이중 중합형 복합레진으로는 MultiCore Flow (Ivovlar Vivadent AG, Schaan, Liechtenstein)와 Bis-Core (Bisco Inc., Schaumburg IL, USA)를 사용하였다. 시편의 제작은 각각 두께가 2(단일충전), 4 (단일충전), 6 (단일충전과 적층충전), 8 (단일충전과 적층충전) ㎜의 Teflon mold에 재료를 주입한 다음 할로겐 광중합기 (Optilux 501, Kerr, Danbury, USA)를 사용하여 광중합하거나 암실에서 30분 동안 기다린 후(자가 중합) Teflon mold에서 제거하였다. 제거한 시편은 $37{\circ}C$ 증류수에 24시간 동안 보관한 후 각 시편의 윗면과 아랫면을 2000번 연마제와 PoGo system (Dentsply, Konstanz, Germany)을 이용하여 마무리하였다. Digital microhardness tester (FM-7, Future-Tech Corp., Tokyo, Japan)를 이용하여 경도값(Knoop hardness number)을 측정하였으며 윗면의 경도값/아랫면의 경도값을 이용하여 경도비를 계산하였다. 계측치는 one-way ANOVA로 통계 분석 후 사후검정은 Scheffe 다중비교법을 이용하였다. 이중 중합형 복합레진의 중합도에 대한 두께의 영향을 보면 재료에 따라 다른 결과를 보였다. 2, 4, 6 mm 군에서는 MulriCore Flow와 Bis-Core 모두 두께에 의한 영향을 받지 않았지만 8 mm 군에서는 MultiCore Flow의 아랫면에서 다른 두께의 군보다 낮은 경도값을 보였다. 충전방법에 따른 중합도의 차이를 보면, 재료의 두께나 재료에 따라 다른 결과를 보였다. 6 mm 군에서는 단일충전군과 적층충전군 사이에 차이를 보이지 않았으나, 8 mm 군에서는 Bis-Core에서는 차이가 없는 반면 MultiCore Flow에서는 단일충전한 군이 적층중전한 군보다 낮은 경도비를 보였다. 중합방법에 따른 중합도의 차이를 보면, 재료에 따라 다른 결과를 보였다. Bis-Core의 경우에는 윗면과 아랫면 모두에서 이중 중합 시킨 군이 자가 중합 시킨 군보다 높은 경도값을 보였다. 그러나 MultiCore Flow의 경우, 윗면에서는 이중중합 시킨 군이 더 높은 경도값을 보였지만 아랫면에서는 더 낮은 값을 보였다. 따라서 본 연구의 결과에 따르면 코어용 이중 중합형 복합레진을 깊은 와동에 충전할 경우 적층충전이 추천되며, 또한 광중합을 해 줌으로써 더 좋은 물리적 성질을 기대할 수 있을 것으로 사료된다.

미세먼지 저감을 위한 그린인프라 계획요소 도출 - 텍스트 마이닝을 활용하여 - (Derivation of Green Infrastructure Planning Factors for Reducing Particulate Matter - Using Text Mining -)

  • 석영선;송기환;한효주;이정아
    • 한국조경학회지
    • /
    • 제49권5호
    • /
    • pp.79-96
    • /
    • 2021
  • 그린인프라 계획은 미세먼지 저감을 위한 대표적인 조경 계획 방안 중 하나이다. 이에, 본 연구에서는 미세먼지 저감을 위한 그린인프라 계획 시 활용될 수 있는 요소를 텍스트 마이닝 기법을 활용하여 도출하고자 하였다. 미세먼지 저감계획, 그린인프라 계획 요소 등의 키워드를 중심으로 관련 선행연구, 정책보고서 및 법률 등을 수집하여 텍스트 마이닝을 통해 단어 빈도-역 문서 빈도(Term Frequency-Inverse Document Frequency, 이하 TF-IDF) 분석, 중심성 분석, 연관어 분석, 토픽 모델링 분석을 실시하였다. 연구결과, 첫째, TF-IDF 분석을 통해 미세먼지 및 그린인프라와 관련된 주요 주제어는 크게 환경문제(미세먼지, 환경, 탄소, 대기 등), 대상 공간(도시, 공원, 지역, 녹지 등), 그리고 적용 방법(분석, 계획, 평가, 개발, 생태적 측면, 정책적 관리, 기술, 리질리언스 등)으로 구분할 수 있었다. 둘째, 중심성 분석 결과, TF-IDF와 유사한 결과가 도출되었으며, 주요 키워드들을 연결하는 중심단어는 '그린뉴딜', '유휴부지'임을 확인할 수 있었다. 셋째, 연관어 분석 결과, 미세먼지 저감을 위한 그린인프라 계획 시, 숲과 바람길의 계획이 필요하며, 미기후 조절의 측면에서 수분에 대한 고려가 반드시 필요한 것으로 확인되었다. 또한, 유휴공간의 활용 및 혼효림의 조성, 미세먼지 저감 기술의 도입과 시스템의 이해가 그린인프라 계획 시 중요한 요소가 될 수 있음을 확인할 수 있었다. 넷째, 토픽 모델링 분석을 통해 그린인프라의 계획요소를 생태적·기술적·사회적 기능을 중심으로 분류하였다. 생태적 기능의 계획요소는 그린인프라의 형태적 부분(도시림, 녹지, 벽면녹화 등)과 기능적 부분(기후 조절, 탄소저장 및 흡수, 야생동물의 서식처와 생물 다양성 제공 등), 기술적 기능의 계획요소는 그린인프라의 방재 기능, 완충 효과, 우수관리 및 수질정화, 에너지 저감 등, 사회적 기능의 계획요소는 지역사회 커뮤니티 기능, 이용객의 건강성 회복, 경관 향상 등의 기능으로 분류되었다. 이와 같은 결과는 미세먼지 저감을 위한 그린인프라 계획 시 리질리언스 및 지속가능성과 같은 개념적 키워드 중심의 접근이 필요하며, 특히, 미세먼지 노출 저감의 측면에서 그린인프라 계획요소의 적용이 필요함을 시사한다고 볼 수 있다.

두께에 따른 이중 중합형 복합레진의 중합 (Polymerization of dual cured composites by different thickness)

  • 김윤주;진명욱;김성교;권태엽;김영경
    • 대한치과보존학회:학술대회논문집
    • /
    • 대한치과보존학회 2008년도 Spring Scientific Meeting(the 129th) of Korean Academy if Conservative Dentistry
    • /
    • pp.169-176
    • /
    • 2008
  • 본 연구는 이중 중합형 복합레진에서 재료의 두께, 충전방법 및 중합방법에 따른 중합도를 미세경도 시험을 이용하여 측정하고자 하였다. 이중 중합형 복합레진으로는 MultiCore Flow (Ivovlar Vivadent AG, Schaan, Liechtenstein)와 Bis-Core (Bisco Inc. Schaumburg IL, USA)를 사용하였다. 시편의 제작은 각각 두께가 2 (단일충전). 4 (단일충전), 6 (단일충전과 적층충전), 8 (단일충전과 적층충전) mm의 Teflon mold에 재료를 주입한 다음 할로겐 광중합기 (Optilux 501 Kerr, Danbury, USA)를 사용하여 광중합하거나 암실에서 30분 동안 기다린 후(자가 중합) Teflon mold에서 제거하였다. 제거한 시편은 $37^{\circ}C$ 증류수에 24시간 동안 보관한 후 각 시편의 윗면과 아랫면을 2000번 연마제와 PoGo system (Dentsply, Konstanz, Germany)을 이용하여 마무리하였다. Digital microhardness tester (FM-7, Future-Tech Corp., Tokyo, Japan)를 이용하여 경도값(Knoop hardness number)을 측정하였으며 윗면의 경도값/아랫면의 경도값을 이용하여 경도비를 계산하였다. 계측치는 one-way ANOVA로 통계 분석 후 사후검정은 Scheffe 다중비교법을 이용하였다. 이중 중합형 복합레진의 중합도에 대한 두께의 영향을 보면 재료에 따라 다른 결과를 보였다. 2, 4, 6 mm군에서는 MultiCore Flow와 Bis-Core 모두 두께에 의한 영향을 받지 않았지만 8 mm 군에서는 MultiCore Flow의 아랫면에서 다른 두께의 군보다 낮은 경도값을 보였다. 충전방법에 따른 중합도의 차이를 보면 재료의 두께나 재료에 따라 다른 결과를 보였다. 6 mm 군에서는 단일충전군과 적층충전군 사이에 차이를 보이지 않았으나, 8 mm 군에서는 Bis-Core에서는 차이가 없는 반면 MultiCore Flow에서는 단일충전한 군이 적층충전한 군보다 낮은 경도비를 보였다. 중합방법에 따른 중합도의 차이를 보면, 재료에 따라 다른 결과를 보였다. Bis-Core의 경우에는 윗면과 아랫면 모두에서 이중 중합 시킨군이 자가 중합시킨 군보다 높은 경도값을 보였다. 그러나 MultiCore Flow의 경우, 윗면에서는 이중중합 시킨 군이 더 높은 경도값을 보였지만 아랫면에서는 더 낮은 값을 보였다. 따라서 본 연구의 결과에 따르면 코어용 이중 중합형 복합레진을 깊은 와동에 충전할 경우 적층충전이 추천되며, 또한 광중합을 해줌으로써 더 좋은 물리적 성질을 기대할 수 있을 것으로 사료된다.

  • PDF

암호화폐의 트랜드 변화에 따른 환경오염 방지 해결방안에 대한 고찰 (A Review on Solution Plans for Preventing Environmental Contamination as the Trend Changes of Cryptocurrency)

  • 김정훈;송세희;고임환;남학현;장재혁;정회윤;최혁재
    • 벤처혁신연구
    • /
    • 제5권1호
    • /
    • pp.91-106
    • /
    • 2022
  • 비트코인의 가격 급등으로부터 부각된 암호화폐는 기존 화폐와 달리 탈중앙화 되어 있어 스태그플레이션 해소 수단으로 각광받고 있다. 특히 4차 산업혁명시대에 접어들면서 블록체인 및 사물인터넷을 이용한 기술들이 다방면에서 활용되고 있으며 그 파급력 또한 광범위하다. 그럼에도 불구하고 테슬라 대표 일론 머스크의 발언처럼 암호화폐의 환경오염 문제 지적은 지속되어 왔으며, 그 중 대표적인 것이 화석연료 사용에 따른 채굴시의 막대한 전기 사용량이다. 또한 기존 채굴방식이 지속될 경우 발생하는 이산화탄소 발생량은 지구 기후 변화의 주원인인 온난화 현상의 가속화를 초래한다. 한편 암호화폐의 채굴에 따른 환경오염과의 연관성을 종합적으로 고찰한 연구는 제한적으로 수행되었다. 본 연구에서는 암호화폐의 생태계 다변화에 따라 환경오염의 문제를 구체적으로 살펴보고자 하였다. 기존 선행문헌을 최신 자료 위주로 조사한 결과 암호화폐의 채굴은 전기사용량 및 전자폐기물 증가에 따라 탄소 중립과는 상반된 환경오염에 영향을 미치고 있었다. 또한 채굴과정이 필요없는 POS 방식이 등장하였지만 탈중앙화가 무너지는 단점이 대두되어 각종 친환경 암호화폐가 등장하는 전환점을 맞이하게 되었다. 끝으로 신재생 에너지를 이용한 암호화폐의 등장은 에너지 저장장치의 이용 극대화, 그리고 국제적 협약이 탄생하는 계기로 작용하게 되었다. 이와 같은 결과를 기초로 향후의 암호화폐는 통화의 가치 뿐만 아니라 환경친화적인 접근이 병행되지 않고서는 퇴보하게 될 것이라는 점을 명확히 언급하고자 한다.