• 한국IT서비스학회:학술대회논문집
• /
• 한국IT서비스학회 2008년도 추계학술대회
• /
• pp.337-340
• /
• 2008

To take the re-use of software, we need to study the efficient integration method of source programs. When the source programs are merged, it is required the steps of verification for any non-interference on non-identical parts of them. The traditional techniques of the program integration verify non-interference of source programs through the simple comparison of statements of source programs. We propose the efficient integration method using data flow analysis in the programs. A study comparing test results from the traditional method and the proposed method has found that the proposed method is more efficient than the traditional method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.837-842
• /
• 2004

The positions of rotating sound sources have been localized by experiments with the Doppler effects removed. In order to do-Dopplerize the sound signals emitted from moving sources, two kinds of signal reconstruction methods were applied. One is the forward propagation method and the other is the backward propagation method. Forward propagation method analyze the source emission time based on the instantaneous distance between sensors and the assumed source position, then the signals are reconstructed with respect to the emission time. On the other hand, the backward method uses time delay to do-Dopplerize the acquired data for the received time of reference. In both techniques, the reconstructed signal data were processed using beamforming algorithm to produce power distributions at the frequency of interest. Experiments have been carried out for varying frequencies, rotating speeds and the object distances. Forward propagation method has shown better performance in locating source position than the backward propagation method.

• Journal of information and communication convergence engineering
• /
• 제18권1호
• /
• pp.22-27
• /
• 2020

Content centric networking (CCN) is regarded as promising internet architecture because it can provide network efficiency in terms of bandwidth consumption by separating contents from a specific network location and decrease network congestion events. However, the application of a CCN does not widely consider the side effects of mobile devices, particularly mobile content sources. For content source mobility, a full routing update is required. Therefore, in this study, a route optimization scheme is proposed for mobile content sources in a CCN environment to provide low communication overhead, short download time, and low resource consumption. The proposed scheme establishes a direct path between content requesters and a mobile content source for the exchange of interest and data packets using interest-piggybacked data packets. Based on the inherent CCN naming characteristics, the content source does not know the name prefix of the content consumer, and thus the proposed optimized CCN scheme utilizes the content router in the home domain of the content source.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 춘계학술대회논문집; 경주코오롱호텔; 22-23 May 1997
• /
• pp.452-459
• /
• 1997

For computer aided design and construction of low noisy power plants, indoor and outdoor noise prediction program has been developed. The program utilizes the predefined data of noise sources and building materials and has the faculty to estimate the source level using the empirical formula in case of the measured data not being available. In the noise prediction, the mutual noise propagation between indoor and outdoor sites are considered. The outdoor noise source in the calculation of geometric divergence effects is modelled as the omni-directional finite line or planar source according to the source geometry and the receiving points. Outdoor noise prediction is carried out to consider the diffraction effect due to plant structures as well as the attenuation effect due to atmospheric absorption and soft ground. The results of indoor and outdoor noise prediction for a recently constructed diesel engine power plant show good agreement with the measured.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2007년도 학술발표회 논문집
• /
• pp.1008-1013
• /
• 2007

The objectives of the paper were to identify appropriate best management practices (BMPs) for reducing nonpoint source (NPS) pollutant loadings and to simulate the effects of the application of the several BMP scenarios on the study watershed using Agricultural Nonpoint Source (AGNPS) model. AGNPS model was calibrated and validated for runoff, sediment yield, and nutrient components using the observed hydrologic and water quality data. The simulated runoff, sediment, and nutrient components were well agreed with observed data. The validated AGNPS was applied to estimate the NPS pollution removal efficiency for BMP scenarios which were selected considering the pollutant characteristics of the study watershed.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.131-133
• /
• 2005

Recently the harmonic generation has declined electricity quality and has bad influence on the electrical installation including OA(Office Automation), FA(Factory Automation), IT(Information Telecommuni-cation) devices and so on. The study of harmonics be greatly interested in diagnosis accident with harmonics was not merely guesswork but clarify the cause by experimental data at these days. Therefore, it is necessary development of AC power source for correct experiment with reliable data. In this paper, we realized the AC power source that can produce and compose harmonics for analysis of accident with harmonics.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.40-42
• /
• 2007

Recently the harmonic generation has deteriorated the quality of electricity and affected the performance on the electrical installation including personal computer, fax, community devices and so on. Some studies of harmonic affects in diagnosis and the cause of accident has not done by the experimental data of harmonic source but merely by presumption according to qualitative analysis. So, in order to research the harmonic affect on the electrical installation according to quantitative analysis and gather reliable data over and over again, it is necessary to develop an Harmonic power source which is capable of generating some harmonics. In this paper, we described about realization of Harmonic power source control module which can produce and added harmonics for the analysis due to harmonic effects.

• 무역학회지
• /
• 제45권4호
• /
• pp.195-205
• /
• 2020

This study investigates the effects of financial development on the foreign direct investment (FDI) flow in host countries. Using bilateral FDI data from 34 OECD source countries to 146 host countries, we performed panel data analysis based on a gravity FDI equation. We hypothesized that the financial development would increase the volume of FDI flows. The results suggest that the well-functioning finance market of source countries as well as a better accessable financial market of host countries contribute to the increase in FDI of OECD in their partner countries. We found also that the financial development effects of source countries are larger than those of host countries. This result shows that the financial development can play a crucial role to impact the FDI inflows as push factor in source country than as a pull factor in host countries.

• 대한의용생체공학회:의공학회지
• /
• 제30권5호
• /
• pp.373-380
• /
• 2009

In general, Independent component analysis (ICA) is a statistical blind source separation technique, used either in spatial or temporal domain. The spatial or temporal ICAs are designed to extract maximally independent sources in respective domains. The underlying sources for spatiotemporal data (sequence of images) can not always be guaranteed to be independent, therefore spatial ICA extracts the maximally independent spatial sources, deteriorating the temporal sources and vice versa. For such data types, spatiotemporal ICA tries to create a balance by simultaneous optimization in both the domains. However, the spatiotemporal ICA suffers the problem of source ambiguity. Recently, constrained ICA (c-ICA) has been proposed which incorporates a priori information to extract the desired source. In this study, we have extended the c-ICA for better analysis of spatiotemporal data. The proposed algorithm, i.e., constrained spatiotemporal ICA (constrained st-ICA), tries to find the desired independent sources in spatial and temporal domains with no source ambiguity. The performance of the proposed algorithm is tested against the conventional spatial and temporal ICAs using simulated data. Furthermore, its performance for the real spatiotemporal data, functional magnetic resonance images (fMRI), is compared with the SPM (conventional fMRI data analysis tool). The functional maps obtained with the proposed algorithm reveal more activity as compared to SPM.

• Journal of Radiation Protection and Research
• /
• 제47권1호
• /
• pp.50-57
• /
• 2022

Background: There are several proton therapy facilities in operation or planned in Taiwan, and these facilities are anticipated to not only treat cancer but also provide beam services to the industry or academia. The simplified approach based on the Monte Carlo-based data sets (source terms and attenuation lengths) with the point-source line-of-sight approximation is friendly in the design stage of the proton therapy facilities because it is intuitive and easy to use. The purpose of this study is to expand the Monte Carlo-based data sets to allow the simplified approach to cover the application of proton beams more widely. Materials and Methods: In this work, the MCNP6 Monte Carlo code was used in three simulations to achieve the purpose, including the neutron yield calculation, Monte Carlo-based data sets generation, and dose assessment in simple cases to demonstrate the effectiveness of the generated data sets. Results and Discussion: The consistent comparison of the simplified approach and Monte Carlo simulation results show the effectiveness and advantage of applying the data set to a quick shielding design and conservative dose assessment for proton therapy facilities. Conclusion: This study has expanded the existing Monte Carlo-based data set to allow the simplified approach method to be used for dose assessment or shielding design for beam services in proton therapy facilities. It should be noted that the default model of the MCNP6 is no longer the Bertini model but the CEM (cascade-exciton model), therefore, the results of the simplified approach will be more conservative when it was used to do the double confirmation of the final shielding design.