• 대한조선학회논문집
• /
• 제46권1호
• /
• pp.57-68
• /
• 2009

In automotive industries, reusability of product information is increasing through database construction of previous product data. The product data is stored by data quality management in product information systems. For naval ships, have the functional similarity by the ships of the same classification and class, that are built by series. Information of hull structures as well as embarked equipments are similar. So it would be effective to use database systems that are considered product information quality of previous ships in design and production processes. In this paper we discuss product information quality in database construction of naval ship product models. For this, we propose a basic concept and reference model for data quality verification. Based on this concept, A verification guideline is defined and it is applied for the case study of the digital naval ship which was built to the naval ship product model.

• 한국IT서비스학회지
• /
• 제11권1호
• /
• pp.239-246
• /
• 2012

The user increases around the WiBro and in which the mobile broad band service is the wireless internet base technology HSDPA, that is the cellular phone foundation technique, and moreover the issue about the user effective quality guarantee emerges but the quality control of the wireless network is the incomplete actual condition. Therefore, the reliability verification according to the development of the system for the performance measure for the continued wireless data service and it and evaluation are needed for the quality control. In this paper, the wireless data service quality measurement system was implemented with the design. The same test environment as the existing network performance measurement program was built for the reliability verification of the embodied device for measuring quality and evaluation and the cost performance was performed. It could confirm that design and embodied wireless data service quality measurement system operated accurately in this paper through the quality measure result value analysis.

• 대한조선학회논문집
• /
• 제51권6호
• /
• pp.510-520
• /
• 2014

Unlike other mass production in small variety, shipbuilding process is a project-based method in single variety, which causes unpredictable volatility in the planning system. In shipyards, series of manufacturing processes from fabrication to erection is sequentially carried out. In order to predict unfavorable changes such as overload or low load of working volume, computerized simulation has been being gradually adopted. The data used in the simulation are processed from the database of the main scheduling and planning system. Thus the quality of those data is very crucial for the meaningful results. Unfortunately, research on the verification of data quality is very rare and hardly known to the authors. In this work, using the database of scheduling and product information system of a large domestic shipyard, the data required for the simulation are qualitatively analyzed and verified.

• 해양환경안전학회지
• /
• 제20권1호
• /
• pp.113-119
• /
• 2014

우리 해군은 함정 제품모델(Naval Ship Product Model, NSPM)을 중심으로 하는 협업 제품개발 환경 구축을 통해 설계 데이터의 재사용성과 M&S의 활용도를 높이고 있다. 그 결과 설계결과의 신뢰성이 높아지고 있으며, 이를 활용한 운영, 건조 시뮬레이션을 통해 소요군의 요구사항이 면밀히 반영되도록 하는 연구도 진행 중에 있다. 이에 따라 설계 데이터의 DB 구축 및 그 품질에 대한 중요성이 부각되고 있으나, 그와 관련된 연구는 초기상태에 머물러 있는 실정이다. 본 연구에서는 저자들의 선행연구 결과인 함정 제품모델의 품질검증 방법론에 기초하여 함정 제품모델을 구성하고 있는 형상요소의 구체적인 품질검증 방안과 이를 자동화하기 위한 연구를 수행하였다. 함정 제품모델 데이터 중 상대적으로 중요하며, 검증과정에 많은 시간이 소요되고 있는 선각모델을 사례연구 대상으로 정의하였으며, 자동차산업에서 사용되고 있는 제품데이터품질(Product Data Quality, PDQ)을 형상검증 기준으로 활용하였다. 최종적으로 선각모델의 형상 품질검증을 위한 기준과 알고리즘을 제안하였으며 이에 기반 한 초기 시스템을 개발하였다.

• 한국산학기술학회논문지
• /
• 제17권4호
• /
• pp.129-137
• /
• 2016

국내외에서 건축시설 중심의 BIM 라이브러리를 개발하여 보급하고 있으나, 개별 라이브러리 형상에 대한 물리적, 논리적 품질검토 방법을 정의하고 있지 않아 2D로부터 변환된 3D 라이브러리 모델의 신뢰성을 확보하는데 어려움이 있다. BIM 라이브러리는 자재 및 부재 제작업체들이 참여하여 컨텐츠를 구성하므로 개별 라이브러리의 제작 후 납품시 별도의 품질검토를 통해 인증을 받는 절차가 무엇보다 중요하다. 또한 그 활용에 범용성을 가져야 하므로 일관된 검토기준에 따라 객체의 품질을 확보하는 것이 필요하다. 따라서 본 연구에서는 국토교통부 표준도를 기반으로 작성된 토목분야 BIM 라이브러리를 토대로 기존 2D와 비교하여 물리적 및 데이터 관점에서 정확한 라이브러리 객체가 작성되었는지를 확인하기 위한 품질 검토 방법을 구성한다. 본 연구는 건축 및 토목분야의 자재 및 부재 제작업체들이 BIM 라이브러리 객체 납품 시 품질 검토 방법으로 널리 활용될 수 있을 것이다. 또한 As-Built BIM 모델의 품질검토를 위한 룰-셋(Rule-Sets) 정보로 활용되어 파라미터 기반의 자동화된 품질검증 시스템 구축에 활용될 수 있을 것이다.

• Journal of Power Electronics
• /
• 제12권5호
• /
• pp.813-820
• /
• 2012

This paper presents the development of a software supported acquisition system for metrological verification and testing of the equipment for monitoring and analysis of the basic electrical power quality parameters. The described procedure consists of two functionally connected segments. The first segment involves generation of the reference three-phase voltage signals, including the possibility of simulation of the various power quality disturbances, typical for electrical power distribution networks. The second part of this procedure includes the real-time recording of power quality disturbances in three-phase distribution networks. The procedure is functionally supported by the virtual instrumentation concept, including a software application developed in LabVIEW environment and data acquisition boards NI 6713 and NI 9215A. The software support of this system performs graphical presentation of the previously generated and recorded signal waveforms. A number of the control functions and buttons, implemented on the virtual instrument front panels, are provided to adjust the basic signal acquisition, generation and recording parameters.

• 한국물환경학회지
• /
• 제25권6호
• /
• pp.832-839
• /
• 2009

Since construction of the estuarine barrage at the mouth of the Nakdong River, eutrophication and increased abundance of phytoplankton have occurred mainly due to the increased retention time in the reach. However, during the spring, there is a decrease in chlorophyll-a, as a result of an increase in zooplankton number, which preys upon phytoplankton and affects the value of chlorophyll-a. In order to emphasize the importance of zooplankton data in water quality simulation, zooplankton community data were used to simulate water quality and eutrophication at Mulgeum located in 27 km upstream from the barrage. WASP 7.2 was used as the water quality model for the river, using a monthly data set from 2003 to 2005 for model calibration and verification. The results showed that chlorophyll-a, DO, and total nitrogen in the river were simulated well during the verification period. The results of water quality simulation using zooplankton community data in the model were better than those with phytoplankton death rate, in terms of the absolute value of percent bias, root mean square error, and Nash-Sutcliffe efficiency. Those results indicate the use of zooplankton data provides more accurate simulation results for chlorophyll-a and eutrophication.

• 한국비블리아학회지
• /
• 제35권1호
• /
• pp.127-148
• /
• 2024

본 연구는 국내 유통 전자출판물의 납본 및 수집을 위한 데이터의 속성과 속성값의 표준화 방안과 정책 및 제도적 고려사항을 제시하고자 하였다. 연구 결과, 필수 및 선택 속성은 총 21개가 도출되었으며, 이는 국립중앙도서관 납본 및 수집 업무 담당자들의 설문조사 및 FGI 결과를 바탕으로 선정되었다. 데이터 품질 검증 과정에서 추가적으로 필요한 속성이 발견되어, 전자책, 오디오북, 웹툰, 웹소설 등 자료유형별로 필수 및 선택 속성을 구체화하였다. 속성값의 표준화는 ISO 8601 규칙에 따른 날짜 및 시간의 표기, 파일 형식과 성인 여부 등 제한된 범위의 속성값의 명확한 지정, 제목과 관련된 정보의 상세한 기술 등을 포함하였다. 정책 및 제도적 고려사항은 표준화된 메타데이터 요구사항의 확립, 지속적인 데이터 품질 관리 및 모니터링 체계의 구축의 필요성을 제시하였다.

• 한국기후변화학회지
• /
• 제9권1호
• /
• pp.81-90
• /
• 2018

"The Framework Act on Low-Carbon Green Growth" specifies the requirements for the development and verification of emission factors for establishing reliable national greenhouse gas statistics. The scope of the regulations covers the development and validation of energy, industrial processes, solvents and other product use, agriculture, land use, land use change and emission and absorption coefficients of the forestry and waste sector as defined in the 1996 IPCC Guideline and GPG 2000, The minerals sector to be covered in this study belongs to industrial processes. As a representative method for quantifying and evaluating GHG emission factors, there are emission grade quality grading and DARS (Data Rating Rating System) in the 'Procedures for Preparing Emission Factor Documents (1997)' reported by US-EPA. However, the above two methods are not specific and comprehensive, and lack the details for accurate emission factor verification. Therefore, there is a need for a method for verifying and quantifying certified greenhouse gas emission factors that reflects characteristics of each industry sector in Korea and accord with IPCC G/L and GHG target management. In this study, we conducted a weighted study on quantitative and evaluation lists of emission factor using questionnaires to develop a more accurate methodology for quantifying national greenhouse gas emission factors in the mineral sector. Quantification and evaluation of emission factor are classified into essential verification and quality evaluation. The essential verifications are : administrative compatibility, method of determining emission factors, emission characteristics, sampling methods and analysis methods, representativeness of data. The quality evaluations consisted of the quality control of the data, the accuracy of the measurement and analysis, the level of uncertainty, not directly affect the emission factor, but consisted of factors that determine data quality.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2019년도 제60차 하계학술대회논문집 27권2호
• /
• pp.401-402
• /
• 2019

The purpose of this study is to find specific service quality factors of enterprises that can maximize the perception of banks' services to users of commercial banks in China, and to establish empirically how these quality factors affect the bank's image. They also want to verify the impact of the positive image of the bank on the user's satisfaction and the willingness to use the bank's services. For empirical verification of this study, questionnaires will be used to customers who have used the services of each of the four commercial banks in China, and the survey was conducted. The collected data were analyzed using the SPSS using statistical techniques such as Cronbach' ${\alpha}$, Investigative Factor Analysis, Reliability Analysis, Correlation Analysis, Regression and Difference Verification. The results of the verification were summarized below. First, the quality of service of commercial banks has a partial positive effect on the bank's image. Second, the image of a commercial bank has a positive effect on customer satisfaction. Third, the image of a commercial bank has a positive effect on the purpose of use. Fourth, the image of commercial banks has a partial mediated effect between service quality and customer satisfaction. Fifth, the image of a commercial bank has a partial mediated effect between the quality of service and its intended use.