• The Journal of the Acoustical Society of Korea
• /
• v.26 no.5
• /
• pp.220-226
• /
• 2007

The two major objectives of acoustical measurements in a cavitation tunnel are measuring the noise levels generated by rotating propellers behind a hull and localizing possible noise sources in order to reduce noise levels. Propeller noise measurement experiments were performed in MOERI cavitation tunnel at December, 2006. In order to put the propeller into cavitating conditions, a wake-generating dummy body was devised. In addition, ten hydrophones are put inside a wing-shaped casing in order to minimize the unexpected flow induced self noise around hydrophone itself. After measuring both of the noises of the rotating propeller behind the dummy body and signals generated by a virtual source, respectively the data were matched field processed using the frequency incoherent Bartlett processor to localize noises on the propeller plane. In this paper, we presented the measured noise analysis and the localization results.

• Smart Media Journal
• /
• v.13 no.5
• /
• pp.19-25
• /
• 2024

The biggest type of behavior that prevents people with developmental disabilities from entering society is aggressive behavior. Aggressive behavior can pose a threat not only to the personal safety of the person with a developmental disability, but also to the physical safety of others. In this study, we propose a wearable system using a low-power processor. The proposed system uses an IMU (Inertial Measurement Unit) to analyze user behavior, and when attack behavior is not detected for a certain period of time through an LED array attached to the developed system, an interesting LED is displayed. By expressing patterns, we provide behavioral intervention through compensation to people with developmental disabilities. In order to implement a system that must be worn for a long time in a power-limited environment, we present a method to optimize performance and energy consumption across all stages, from data preprocessing to AI model application.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.11
• /
• pp.497-508
• /
• 2008

Mobile Multimedia File System, MNFS, is a file system which extensively exploits NAND FLASH Memory, Since general Flash file systems does not precisely meet the criteria of mobile devices such as MP3 Player, PMP, Digital Camcorder, MNFS is designed to guarantee the optimal performance of FLASH Memory file system. Among many features MNFS provides, there are three distinguishable characteristics. MNFS guarantees, first, constant response time in sequential write requests of the file system, second, fast file system mounting time, and lastly least memory footprint. MNFS implements four schemes to provide such features, Hybrid mapping scheme to map file system metadata and user data, manipulation of user data allocation to fit allocation unit of file data into allocation unit of NAND FLASH Memory, iBAT (in core only Block Allocation Table) to minimize the metadata, and bottom-up representation of directory. Prototype implementation of MNFS was tested and measured its performance on ARM9 processor and 1Gbit NAND FLASH Memory environment. Its performance was compared with YAFFS, NAND FLASH File system, and FAT file system which use FTL. This enables to observe constant request time for sequential write request. It shows 30 times faster mounting time to YAFFS, and reduces 95% of HEAP memory consumption compared to YAFFS.

• Journal of KIISE:Computing Practices and Letters
• /
• v.13 no.7
• /
• pp.433-441
• /
• 2007

The bio-Sensors, which are sensing the vital signs of human bodies, are largely used by the medical equipment. Recently, the sensor network technology, which composes of the sensor interface for small-seize hardware, processor, the wireless communication module and battery in small sized hardware, has been extended to the area of bio-senor network systems due to the advances of the MEMS technology. In this paper we have suggested a design and implementation of a health care information system(called u-EMS) using a bio-sensor network technology that is a combination of the bio-sensor and the sensor network technology. In proposed system, we have used the following vital body sensors such as EKG sensor, the blood pressure sensor, the heart rate sensor, the pulse oximeter sensor and the glucose sensor. We have collected various vital sign data through the sensor network module and processed the data to implement a health care measurement system. Such measured data can be displayed by the wireless terminal(PDA, Cell phone) and the digital-frame display device. Finally, we have conducted a series of tests which considered both patient's vital sign and context-awared information in order to improve the effectiveness of the u-EMS.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.3
• /
• pp.98-109
• /
• 2002

Bluetooth technology is a publicly available specification proposed for Radio Frequency (RF) communication for short-range :1nd point-to-multipoint voice and data transfer. It operates in the 2.4㎓ ISM(Industrial, Scientific and Medical) band and offers the potential for low-cost, broadband wireless access for various mobile and portable devices at range of about 10 meters. In this paper, we describe the structure and the test results of the bluetooth baseband module with direct memory access method we have developed. This module consists of three blocks; link controller, UART interface, and audio CODEC. This module has a bus interface for data communication between this module and main processor and a RF interface for the transmission of bit-stream between this module and RF module. The bus interface includes DMA interface. Compared with the link controller with FIFOs, The module with DMA has a wide difference in size of module and speed of data processing. The small size module supplies lorr cost and various applications. In addition, this supports a firmware upgrade capability through UART. An FPGA and an ASIC implementation of this module, designed as soft If, are tested for file and bit-stream transfers between PCs.

• The KIPS Transactions:PartA
• /
• v.12A no.1 s.91
• /
• pp.41-52
• /
• 2005

Memory reference instruction caused by cache miss is the critical factor that limits the processing power of processor. Cache prefetching technique is an effective way to reduce the latency due to memory access. However, excessively aggressive prefetch leads to cache pollution and finally to cancel out the advantage of prefetch. In this study, an active prefetch filtering scheme is introduced which dynamically decides whether to commence prefetching after referring a filtering table to reduce the cache pollution due to unnecessary prefetches. For the precision filtering, an evicted address referencing scheme has been proposed where the filter directly compares the current prefetch address with previous unnecessary prefetch addresses stored in filtering table. Moreover, a small sized exclusive prefetch cache has been introduced to increase the amount of eviction of unnecessarily prefetched addresses to enhance the accuracy of dynamic filtering. The exclusive prefetch cache also prevents useful demand data from being pushed out by prefetched data, while the evicted address direct referencing scheme enables the prefetch cache to keep most of useful prefetch data within its small size. Experimental results from commonly used general and multimedia benchmarks show that the average cache miss ratio has been decreased by $13.3{\%}$ by virtue of enhanced filtering accuracy compared with conventional schemes.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.8
• /
• pp.25-32
• /
• 2011

Networks-on-chip (NoC) is emerging as a key technology to overcome severe bus traffics in ever-increasing complexity of the Multiprocessor systems-on-chip (MPSoC); however traditional electrical interconnection based NoC architecture would be faced with technical limits of bandwidth and power consumptions in the near future. In order to cope with these problems, a hybrid optical NoC architecture which use both electrical interconnects and optical interconnects together, has been widely investigated. In the hybrid optical NoCs, wormhole switching and simple deterministic X-Y routing are used for the electrical interconnections which is responsible for the setup of routing path and optical router to transmit optical data through optical interconnects. Optical NoC uses circuit switching method to send payload data by preset paths and routers. However, conventional hybrid optical NoC has a drawback that concurrent transmissions are not allowed. Therefore, performance improvement is limited. In this paper, we propose a new routing algorithm that uses circuit switching and adaptive algorithm for the electrical interconnections to transmit data using multiple paths simultaneously. We also propose an efficient method to prevent livelock problems. Experimental results show up to 60% throughput improvement compared to a hybrid optical NoC and 65% power reduction compared to an electrical NoC.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.43 no.4 s.310
• /
• pp.123-132
• /
• 2006

In this paper, the digital video and audio system is improved so that various digital video data formats in DVD disc, and digital audio data formats through the S/PDIF ports may be decoded. It is not easy to implement all decoding functions of video and audio by a DVD processor. The special structure in audio decoding circuit is proposed in this system so as to have simultaneously almost same video and audio performance in quality. By dividing the decoding circuit separately into video and audio part, the audio quality can be dramatically improved together with supporting several audio formats and with several effects. In order to satisfy the perfect audio system to support to audio decoding formats, it is just enough to get the expensive, complicated decoder. However, it may be not easy to get this expensive decoder in near future. Therefore it is rather to adopt the downloading method by which the host should download the appropriate code into memory by detecting the corresponding audio bit streams. It is proved that this method may be efficient in the point of sharing resource of audio data for video decoding.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.3
• /
• pp.96-101
• /
• 2015

This paper describes a design and implementation of the NFC bridge chip which performs interface between kinds of devices and mobile phones including NFC controller through NFC communication. The NFC bridge chip consists of the digital part and the analog part which are based on NFC Forum standard. Therefore the chip treats RF signals and then transforms the signal to digital data, so it can interface kinds of devices with the digital data. Especially the chip is able to detect RF signals and then wake up the host processor of a device. The wakeup function dramatically decreases the power consumption of the device. The carrier frequency is 13.56MHz, and the data rate is up to 424kbps. The chip has been fabricated with SMIC 180nm mixed-mode technology. Additionally an NFC bridge chip application to the blood glucose measurement system is described for an application example.

• The KIPS Transactions:PartD
• /
• v.18D no.3
• /
• pp.179-184
• /
• 2011

Current mobile devices have surpassed its boundaries as a more communication tool to a smart device which provides additional features. These features have supported the smart life of its users, but have reached its limit from low-performance processors and short-battery time. These issues can be resolved b implementing higher performing hardware, but they come with a burden of high cost. This paper introduces a new way of managing computing resources in a mobile device by enhancing the quality of human-computer interaction. The real-speed felt by users are mainly influenced by the time it takes form a user's input to the device to display the completed result on the screen. Since the size of the screen for mobile devices are small, if the processor only fetch data to be used for displaying on screen, the time can be significantly reduced. MVC+Prefetch Controller pattern accomplished this goal by using the minimum amount of data from DB to fetch display and still manages to support high-speed data transfer to achieve seamless display. This idea has been realized by practice using Samsung mobile phone S8500, which demonstrated the superior performance on user's perspective.