• 한국항해항만학회지
• /
• 제32권3호
• /
• pp.245-250
• /
• 2008

근래 컴퓨터 수치모델이 급속하게 발전함으로써 다양한 분야에서 수치예보기술이 응용되고 있다. 실시간 해양예보시스템도 그 중의 하나로 관측시스템, 정보제공시스템 및 모델링 시스템을 결합하여 실시간 해양정보를 제공함으로써 해상교통의 안전과 연안환경의 보호에 기여하고 있다. 본 연구에서는 부산항 실시간 해양예보시스템의 구축을 위한 기초연구로서 모델링 시스템을 개발하였으며 그 결과를 제시하고 있다. 현재 기존의 관측자료가 부족하여 M2조석의 모델링만으로 시스템의 테스트를 행하였으나 앞으로 실시간 관측자료가 충분히 구비되면 전면적인 시스템의 테스트가 필요하다. 아울러 추후 관측시스템과 정보제공시스템이 계속 구축될 예정이며 이들 시스템이 모두 구비되고 나면 인터넷을 통한 실시간 정보제공이 이루어질 수 있을 것이다.

• 대한치과보철학회지
• /
• 제39권6호
• /
• pp.633-640
• /
• 2001

Statement of problem. Relatively low success rate of root analogue implant system was supposed to be due to the time duration between extraction and implant installation. The use of three-dimensional computer tomography and the reconstruction of objects using rapid prototyping methods would be helpful to shorten this time. Purpose. This aim of this study was to evaluate the application possibility of the 3-dimensional computer tomography and the rapid prototyping to root analogue implants. Material and methods. Ten single rooted teeth were prepared. Width and height of the teeth were measured by the marking points. This was followed by CT scanning, data conversion and rapid prototyping model fabrication. 2 methods were used; fused deposition modelling and stereolithography. Same width and height of this models were measured and compared to the original tooth. Results. Fused deposition modelling showed an enlarged width and reduced height. The stereolithography showed more exact data compared with the fused deposition modelling. Smaller standard deviation were recorded in the stereolithographic method. Overall width error from tooth to rapid prototyping was 7.15% in fused deposition modelling and 0.2% in stereolithography. Overall height showed the tendency of reducing dimensions. Conclusion. From the results of this study, stereolithography seems to be very predictable method of fabricating root analogue implant.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권6호
• /
• pp.887-893
• /
• 2010

기관실 시뮬레이터에서 3상유도전동기에 대한 모델링을 단순하게 처리하는 경우에는 왜곡된 특성에 의해 각종 전기 기계적 모의 성능 수준이 크게 저하된다. 한편, 전동기 특성을 1, 2차 측 파라미터로 구분하는 기존의 등가회로 방식들은 복잡한 실험을 거치거나 상세 기술 자료가 확보되지 않고는 현장 전동기에 대한 회로에서의 파라미터 값들을 확정하지 못한다는 점에서 정격제원 정도만 주어지는 기관실 시뮬레이터의 개발 작업 환경에서는 사용할 수가 없다. 이러한 문제의 해결을 위해 본 논문에서는 최소 파라미터에 의한 전원 직결의 2 회로정수 방식 등가회로를 제시하였으며 이로부터 정격제원에 의해 회로정수가 결정되기까지의 조건과 과정 및 관련 식들을 해석하였다. 또한 실제 전동기에 이를 적용하여 얻어지는 특성곡선들을 통해 임의의 전동기에 대한 근사특성과 실용성을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.227-232
• /
• 2003

Usually, the thrust of a Linear Pulse Motor(LPM) is calculated by magnetic equivalent circuit modelling method. Analytical thrust deviation exists to calculating magnetic flux density by using Permeance Modelling Method, Finite Element Method, and Velocity Electric Motive Force Method. For calculating accuracy thrust by using these every method, the thrust is calculated and compared by Lorentz Force Method, Magnetic Coenergy Method, and Maxwell correspondence force Method. And that becomes important factor at the comparison of each capacity and parameter of motor. So this study wants to compare and analyze measurement data and calculating data of the static thrust of LPM. and then we can get more accuracy method, calculating the static thrust of LPM.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제10권4호
• /
• pp.220-228
• /
• 2002

The cool-down performance after soaking is very important in an automotive air-conditioning system and is considered as a key design variable. Therefore, transient characteristics of each system component are essential to the preliminary design as well as steady-state performance. The objective of this study is to develop a computer simulation model and ostinato theoretically the transient performance of an automotive air-conditioning system. To do that, the mathematical modelling of each component, such as compressor, condenser, receiver/drier, expansion valve, and evaporator, is presented first of all. The basic balance equations about mass and energy are used in modelling. For detailed calculation, condenser and evaporator are divided into many sub-sections. Each sub-section is an elemental volume for modelling. In models of expansion valve and compressor, dynamic behaviors are not considered in this analysis, but the quasisteady state ones are just considered, such as the relation between mass flow rate and pressure drop in expansion device, polytropic process in compressor, etc. Also it is assumed that there are no heat loss and no pressure drop in discharge, liquid, and suction lines. The developed simulation model is validated by comparing with the laboratory test data of an automotive air-conditioning system. The overall time-tracing properties of each component agreed well with those of test data in this case.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2003년도 춘계공동학술대회논문집
• /
• pp.171-178
• /
• 2003

해양에 기름이 유출되면 방제작업의 초기단계에서 기름의 이동 및 확산을 차단하기 위하여 오일 붐을 사용하는 것이 일반적이다. 그러나 오일 붐은 유속, 기름의 밀도와 점성, 수심, 기름의 양, 그리고 붐 홀수의 길이 등과 같은 여러 인자들에 의해 그 포획능력이 영향을 받는다. 본 연구에서는 이들 누유인자가 오일 붐의 포획과정에서 어떠한 영향을 미치는지를 체계적으로 파악하기 위하여 컴퓨터 모델링을 수행하였다. 모델링을 위하여 CFD(computational fluid dynamics) 프로그램 중에서 가장 널리 알려진 Fluent를 이용하였으며 기존의 실험자료와 비교함으로써 모델링 결과를 검증하였다. 본 연구의 결과는 방제작업 책임자와 오일 붐 설계자에게 유용한 참고자료가 될 것으로 기대된다.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 1998년도 The 12th Asia Quality Management Symposium* Total Quality Management for Restoring Competitiveness
• /
• pp.295-300
• /
• 1998

Recently graphical modelling is being studied as a useful process analysis tool for exploratory causal analysis. Graphical modelling is a presentation method that uses graphs to describe statistical models of the structures of multivariate data. This paper describes an application of this graphical modeling with two cases from the automotive parts industry. One case is the unbalance problem of the pulley, an automotive generator part. There is multivariate data of the product from each of the processes which are connected in the series. By means of exploratory causal analysis between the variables using graphical modeling, the key processes which causes the variation of the final characteristics and their mechanism of the causal relationship have become clear. Another case is, also, the unbalanced problem of automotive starter parts which consists of many parts and is manufactured by complex machinery and assembling process. By means of the similar technique, the key processes are obtained easily and the results are reasonable from technical knowledge.

• 대한기계학회논문집
• /
• 제17권10호
• /
• pp.2446-2456
• /
• 1993

By virtue of progress of computer science, CAD/CAM technology has been developed greatly in each area. But the problems in the integration of CAD/CAM are not yet solved completely. The reason is that the exchange of data between CAD and CAM is difficult because the domains of design and manufacturing are different in nature. To solve this problem, a feature based modeller is developed in this study, which makes it possible to communicate between design and manufacturing through features. The modeller has feature, the concept of semi-bounded plane is introduced, and implemented as a B-rep sheet model using half-edge data structure. The features are then created on a part by local modification of the boundary on a part based on feature template information. This approach generalizes the modelling of features in a geometry model.

• Structural Engineering and Mechanics
• /
• 제33권5호
• /
• pp.589-604
• /
• 2009

In the field of predicting structural safety and reliability the operating conditions play an essential role. Since the time and cost limitations are a significant factors in engineering it is important to predict the future operating conditions as close to the actual state as possible from small amount of available data. Because of the randomness of the environment the shape of measured load spectra can vary considerably and therefore simple distribution functions are frequently not sufficient for their modelling. Thus mixed distribution functions have to be used. In general their major weakness is the complicated calculation of unknown parameters. The scope of the paper is to investigate the load spectra growth for actual operating conditions and to investigate the modelling and extrapolation of load spectra with algorithm for mixed distribution estimation, REBMIX. The data obtained from the measurements of wheel forces and the braking moment on proving ground is used to generate load spectra.

• 한국디지털건축인테리어학회논문집
• /
• 제6권2호
• /
• pp.25-30
• /
• 2006

The purpose of this study was to investigate how student felt the strengths and shortness of presentation methods for formation of interior spaces. For this study, the process of the interior architecture design class was divided into three stages: the programming. the design development, and the design completion. In the design development stage, students used presentation methods: hand sketch, scale model, computer modeling, and virtual realty. The strengths of hand sketch was that quick expression. Models provided three-dimensional feelings. Computer modelling provide realistic color and texture. Virtual reality provided three-dimensional immersion and real scale. It is effective that students collect brain storm images using quick hand sketch in the beginning of design development stage. After that, they compose interior spaces in study models with small scale. Watching the models, they design details of spaces by using hand sketch and computer modelling. Using virtual reality, they can check the scale and circulation. Finally, they complete computer modelling by texture mapping and check the final design in virtual reality.