• 정보처리학회논문지D
• /
• 제10D권6호
• /
• pp.907-916
• /
• 2003

데이터베이스 벤치마크는 많은 양의 데이터에 대한 효과적 생성을 요구한다. 본 논문은 개발된 데이터 생성기의 시스템 구성도, 데이터 생성 동작, 특성을 기술한다. 본 데이터 생성기 특성은 대용량 데이터 생성 지원, 칼럼 단위 데이터 생성, 다양항 데이터 분포 지원 및 검증, 실데이터 생성 등이다. 또한 타 데이터 생성기들과 기능 관점에서 비교하였다. 마지막으로 대용량 데이터 생성시의 입출력 병목현상 해결을 위해 RAID 시스템과 비 RAID 시스템간의 성능을 실험적으로 비교하였으며, 실험 결과에 근거하여 시스템 구성 가이드를 제시한다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권3호
• /
• pp.168-174
• /
• 2004

On-line monitoring system(OMS) has been developed for the pumped storage generator/motor The OMS is applied to diagnosis of the PD(partial discharge) activity of stator insulation, the shorted-turn of rotor winding and the variation of the air-gap between stator and rotor. The OMS consists of DAS(data acquisition system), main server system, gateway and display PC. The DAS measures the PD, the shorted-turn and air-gap from three sensors installed on the generator/motor. The gateway controls the data which sent by DAS. The main server system saves the data, analyzes the data and conducts the diagnostic algorithm. The display PC shows the diagnostic results of partial discharge, shorted-turn and air-gap. Field tests were conducted using PDA(partial discharge analyzer). The results of the OMS and PDA measurements can be directly correlated with normalized quantity number(NQN), PD magnitude(Qm) and PD pattern.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
• /
• pp.211-215
• /
• 2006

In this paper, design and applications of a generalized, versatile and customizable IF signal generator that can model the modernized GPS and Galileo signal is given. It generates IF sampled data that can be directly used by a software receiver. Entire constellation of satellites which is independent of satellite-user geometry is easily determined using a real or simulated ephemeris data. Since the IF center frequency, sampling frequency and quantization bit number are user location dependent parameters, their effects are also considered in IF signal generator. The generalized IF signal generator will be very well suited for the development phase of a software receiver due to its versatility. The full access to the sampling frequency, front-end filter definition and ADC parameters also offers a great opportunity for cost-effective analysis of tracking loops and error mitigation techniques at the receiver level. Interference sources can be easily added to the generator to simulate specific environments. This software IF signal generator can also be used to feed a multi-frequency multi-system software receiver for the prototyping of a combined GPS/Galileo receiver. The test result using the generated signals and a real software receiver shows the effectiveness of the implemented IF signal generator.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권4호
• /
• pp.493-500
• /
• 2002

The operational data of diesel generator engine is two kinds of data. One is interactive the other is non interactive. We can find the fault information from interactive data measured for every sampling time when the changing rate, direction and status of data are investigated in comparition with those of normal status to diagnose the fault of combustion system. The various data values of combustion system for diesel engine are not proportional to load condition. The criterion to decide the level of data value is not absolute but relative to relational data. This study proposes to compose malfunction diagnosis engine using neural networks to decide that level of data value is out of normal status with the data collected from generator engine of the ship using the commercial data mining tool. This paper investigates the real ship's operational data of diesel generator engine and confirms usefulness of fault detecting through simulations for fault detecting.

• 비파괴검사학회지
• /
• 제33권6호
• /
• pp.519-523
• /
• 2013

A steam generator (SG) tube is an important component of a nuclear power plant (NPP). It works as a pressure boundary between the primary and secondary systems. The integrity of a SG tube can be assessed by an eddy current test every outage. The eddy current technique(adopting a bobbin probe) is currently the main technique used to assess the integrity of the tubing of a steam generator. An eddy current signal analyst for steam generator tubes continuously analyzes data over a given period of time. However, there are possibilities that the analyst conducting the test may get tired and cause mistakes, such as: missing indications or not being able to separate a true defect signal from one that is more complicated. This error could lead to confusion and an improper interpretation of the signal analysis. In order to avoid these possibilities, many countries of opted for automated analyses. Axial ODSCC (outside diameter stress corrosion cracking) defects on the tubes of OPR1000 steam generators have been found on the tube that are in contract with tube support plates. In this study, automated analysis software called CDS (computer data screening) made by Zetec was used. This paper will discuss the results of introducing an automated analysis system for an axial ODSCC on the tubes of an OPR1000 steam generator.

• Nuclear Engineering and Technology
• /
• 제55권2호
• /
• pp.506-515
• /
• 2023

This study is to find a method to learn engine sound after the start-up of a diesel generator installed in nuclear power plant with an unsupervised deep learning algorithm (CNN autoencoder) and a new method to predict the failure of a diesel generator using it. In order to learn the sound of a diesel generator with a deep learning algorithm, sound data recorded before and after the start-up of two diesel generators was used. The sound data of 20 min and 2 h were cut into 7 s, and the split sound was converted into a spectrogram image. 1200 and 7200 spectrogram images were created from sound data of 20 min and 2 h, respectively. Using two different deep learning algorithms (CNN autoencoder and binary classification), it was investigated whether the diesel generator post-start sounds were learned as normal. It was possible to accurately determine the post-start sounds as normal and the pre-start sounds as abnormal. It was also confirmed that the deep learning algorithm could detect the virtual abnormal sounds created by mixing the unusual sounds with the post-start sounds. This study showed that the unsupervised anomaly detection algorithm has a good accuracy increased about 3% with comparing to the binary classification algorithm.

• 센서학회지
• /
• 제21권4호
• /
• pp.249-255
• /
• 2012

Among the human senses, olfactory information still does not have a proper data presentation method unlike that regarding vision and auditory information. It makes presenting the sense of smell into multimedia information impossible, which may be an exploratory field in human computer interaction. In this paper, we propose an olfactory information presentation method, which is a way to use smell as multimedia information, and show an application for scent generation and odor display using a web service. The olfactory information can present smell characteristics such as intensity, persistence, hedonic tone, and odor description. The structure of data format based on olfactory information can also be organized according to data types such as integer, float, char, string, and bitmap. Furthermore, it can be used for data transmitting via a web service and for odor display using a scent generator. The scent generator, which can display information of smell, is developed to generate 6 odors using 6 aroma solutions and a diluted solution with 14 micro-valves and a micropump. Throughout the experiment, we confirm that the remote user can grasp information of smell transmitted by messenger service and request odor display to the computer controlled scent generator. It contributes to enlarge existing virtual reality and to be proposed as a standard reference method regarding olfactory information presentation for future multimedia technology.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1066-1071
• /
• 2007

This case study refers to turbine-generator with retrofitted turbine rotor. Vibration problem occurring after the retrofit was mainly due to high vibration from exciter side. However, repeated test run and operation during scheduled maintenance caused high vibration from generator bearing, and post-overhaul test run before turbine vibration correction caused oil whip on the bearing. This case study shows how to analyze vibration condition of high turbine generator vibration detected during the post-overhaul test run and vibration condition of offline and online data to reflect it on establishing maintenance schedule and overhaul correction procedure. Vibration data could be acquired during steady load operation or even with varying speed and load. Each data is important for machinery condition evaluation. This case study shows that the vibration data during extreme condition is the key factor in analysis, which helps to find the machinery problem.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2004년도 추계 종합학술대회 논문집
• /
• pp.466-469
• /
• 2004

XML은 개발자들이 클라이언트 어플리케이션에 데이터를 디스플레이하고 조작하기 위해 구조화된 데이터를 표현하고 전달하고 교환할수 있는 텍스트 기반 포맷을 말한다. 이러한 XML에 Spatial 정보를 포함한 Spatial XML이 등장하면서 이에대한 이용에 많은 관심이 있으며 실제로 Spatial XML을 RDBMS에 저장하여 지리정보 검색에 대한 유용한 자료로 사용하고 있다. 이 논문에서는 Spatial XML을 질의 하기 위한 Spatial XQuery를 이용하여 RDBMS에 저장된 자료에 대한 검색하고 또한 Spatial XML Generator를 통해서 XML형태로 RDBMS에 있는 정보를 추출하는 Spatial XML Generator 알고리즘을 구현하고자 한다.

• 한국소음진동공학회논문집
• /
• 제18권2호
• /
• pp.238-246
• /
• 2008

This case study refers to turbine-generator with retrofitted turbine rotor. Vibration problem occurring after the retrofit was mainly due to high vibration from exciter side. However, repeated test run and operation during scheduled maintenance caused high vibration from generator bearing, and post-overhaul test run before turbine vibration correction caused oil whip on the bearing. This case study shows how to analyze vibration condition of high turbine generator vibration detected during the post-overhaul test run and vibration condition of offline and online data to reflect it on establishing maintenance schedule and overhaul correction procedure. Vibration data could be acquired during steady load operation or even with varying speed and load. Each data is important for machinery condition evaluation. This case study shows that the vibration data during extreme condition is the key factor in analysis, which helps to find the machinery problem.