• Proceedings of the KIEE Conference
• /
• 1999.07c
• /
• pp.1262-1266
• /
• 1999

More precise operation and control is required to ensure the stability and security of modern large power systems that is a complicated and widely dispersed structure. To ensure the precise operation and control of modern power system, most of all, precise monitoring and measurement of the various state values of power system is required. This paper discusses phasor measurement unit using synchronization signals from the GPS satellite system- Synchronized Phasor Measurement Unit. Considering the power system operation state, the transmitting data format over modems is defined. To provide all available information, PMU process the measurements to generate three phase symmetrical component. This paper proposes the transmitted data format and implements the PMU model using EMTP/Models. The validity of proposed model is confirmed through several contingency on the simple power system.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.123-126
• /
• 2005

The IEEE 1451.4 standards defines an architectural model for interfacing smart transducers for sensors & actuators. This standard allows analogue transducers to communicate their identification and calibration data in a digital format. A digital format is called TEDS(transducer electronic data sheet). However, the standard template of IEEE 1451.4 TEDS do not supports gas sensors to use in electronic nose system, such as array sensors. In this paper, a solution to standardize sensors for electronic nose systems is presented.

• Journal of the Optical Society of Korea
• /
• v.20 no.4
• /
• pp.464-469
• /
• 2016

All-optical non-return-to-zero (NRZ) -to- return-to-zero (RZ) data-format conversion has been successfully demonstrated using a semiconductor optical amplifier in a fiber-loop mirror (so-called SOA-loop mirror) with a continuous-wave (CW) holding beam. The converted RZ signal after pulse compression has been used to create a 40 Gb/s OTDM (Optical Time Division Multiplexing) signal. Here is proposed an NRZ-to-RZ conversion method without any additional optical clocks, unlike conventional methods based on optical AND logic. In addition, it has the merit of operating at various bit-rate speeds without any controlling device. Moreover, it has a simple structure, and it can be used for all-optical bit-rate-flexible clock recovery.

• Journal of Environmental Impact Assessment
• /
• v.5 no.1
• /
• pp.95-105
• /
• 1996

Meteorological Joint Frequency Function required indispensably in long-term air quality prediction models were discussed for practical application in Korea. The algorithm, proposed by Turner(l964), is processed with daily solar insolation and cloudiness and height basically using Pasquill's atmospheric stability classification method. In spite of its necessity and applicability, the computer program, called STAR(STability ARray), had some significant difficulties caused from the difference in meteorological data format between that of original U.S. version and Korean's. To cope with the problems, revised STAR program for Korean users were composed of followings; applicability in any site of Korea with regard to local solar angle modification; feasibility with both of data which observed by two classes of weather service centers; and examination on output format associated with prediction models which should be used.

• Journal of Sensor Science and Technology
• /
• v.14 no.6
• /
• pp.444-454
• /
• 2005

The IEEE 1451.4 standards defines an architectural model for interfacing smart transducers for sensors & actuators. This standard allows analogue transducers to communicate their identification and calibration data in a digital format. A digital format is called the TEDS (transducer electronic data sheet). However, the standard template TEDS of IEEE 1451.4 do not supports sensors to use in electronic tongue system, such as arrayed-potentiometric and voltametric sensors. In this paper, a solution to standardize sensors for E-Tongue (electronic tongue) and electronic tongue systems is presented.

• Journal of Korean Library and Information Science Society
• /
• v.32 no.1
• /
• pp.285-307
• /
• 2001

With frequent use of the internet these days, academic libraries are offering the "Document Delivery Service" through the Internet in our country. The current "Document Delivery Service" utilized over the Internet was researched according to the method used by each library to connect to the internet. and this research, based on each library's current service conditions, service data types, document format of service data, whether the libraries used OPAC for document service or not, and user types. As a result of the research, it was discovered that most of the "Document Delivery Service" is served by website, mainly PDF format, use another interface differs from OPAC, and the personal users in our academic libraries.ers in our academic libraries.

• Journal of Families and Better Life
• /
• v.19 no.6
• /
• pp.207-220
• /
• 2001

This paper analyzed some financial counseling cases on the internet and suggested a framework for the improved financial counseling. Data of 392 financial counseling cases were gathered from the site bulletin board whose members were mostly housewives. The largely demanded contents of counseling were about 1) general financial procedures and the evaluation of household financial condition, 2) saving and investment, 3) buying and canceling insurance, and 4) debt repayment and debt availability. Based on the data analysis, a special format which requires on the personal and financial information of consumers was developed. In a way to help counselors and clients far questions asked often, FAQs is also suggested. Finally the arrangement and development of financial planning related softwares were investigated.

• Computers and Concrete
• /
• v.6 no.1
• /
• pp.59-78
• /
• 2009

Reliability analysis for a proposed limit state bridge design code is performed. In order to introduce reliability concept to design code, the proposed live load model is based on truck weight survey. Test data of domestic material strengths are collected to model statistical properties of member strengths. Sample RC and PSC girder sections are designed following the safety factor format of the proposed code and compared with the current design practice. Reliability indexes are calculated and examined for material and member resistance factor formats and sample calibrations of safety factors are presented. It is concluded that the proposed code provides reasonable level of reliability compared to the international design standards.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.95-96
• /
• 2007

Recently, flexible communication is issued because of implementation of both communicable small and equipment wireless networks environment. Similarly diverse small equipment, from wireless LAN to sensor, have different data format as network access. So, middleware that support flexible communication is necessary. Also it is important that information format of diverse sensor(raw data) converts to information usable in application.

• IE interfaces
• /
• v.13 no.2
• /
• pp.258-265
• /
• 2000

EDI(Electronic Data Interchange) allows the exchange of business information and computer-processable data in a standard, structured format electronically between organizational entities. EDI handles the restructuring of a business document into the standard format so that it can be transmitted from one computer to another. This paper identifies features and technologies of web browsed electronic document exchange system as follows 1) the fundamental technologies that consists of the EDI technologies, the Internet/Web technologies, the security/authentication techniques, and the XML implementation technologies. 2) the functions that consists of the document standards, transfer technology of the document, encryption and authentication 3) the implemented Web-EDI systems that consists of document generation module, encryption and authentication module, transfer module, acknowledgement module, administration module. In this paper, the Web-based EDI system implemented from the researched technologies will be installed on the EDI servers owned by corporate customers and enable the exchange of documents between each installed companies.