• Journal of Environmental Impact Assessment
• /
• v.30 no.2
• /
• pp.117-131
• /
• 2021

Urban development is continuously being carried out to stabilize housing supply. The importance of ecosystem services assessments considering the various urban spatial structures is emerging as land use change in the wake of urban development has impact on the provision of ecosystem services. However, few studies are available as to the effects of land use transition in agricultural land due to urban development on ecosystem services. The purpose of this study is to examine the applicability of decision-making in the urban planning process by analyzing the impact of land use change on ecosystem services due to urban development. Therefore, the scenario was set on before and after the city development, targeting Namyangju Wangsuk Zone 1 and InVEST model was used to compare and analyze changes in value of ecosystem services. Analysis results of ecosystem services before the urban development, it turned out that habitat quality and water yield increased overtime but carbon storage and crop production decreased. Analysis results of ecosystem services after the urban development indicated that all items in ecosystem services by scenario decreased more than in 2018. Among the scenarios of urban development, compact city had the lowest value of water resource supply but had the highest value in terms of habitat quality, carbon storage amount, and crop production. The study results demonstrate that the compact city has positive effects on ecosystem services and is expected to be used as the basic data for supporting policy decision-making in the establishment of future urban development and management plans.

• Proceedings of The Korean Society of Agricultural and Forest Meteorology Conference
• /
• 2013.11a
• /
• pp.23-24
• /
• 2013

Micrometeorological fluxes measured over a tall forest in a complex terrain are difficult to interpret. $CO_2$ storage often makes significant contributions to net ecosystem exchange of $CO_2$ (NEE) in early morning and during nighttime due to calm and stable conditions. We measured the above-canopy $CO_2$ flux along with its concentration profiles at eight levels within and above the canopy to evaluate $CO_2$ storage term. Our question is whether or not the $CO_2$ storage term can be estimated accurately from a single level measurement of $CO_2$ concentration in a complex terrain. Our objectives are (1) to document vertical profiles of $CO_2$ concentration and (2) to compare the diurnal and seasonal variations of $CO_2$ storages estimated from single and multi-level $CO_2$ concentration data. Seasonally averaged Diurnal variations of $CO_2$ concentration ranged from 398 to 455 ppm near the forest floor at 0.1 m whereas they ranged from 364 to 395 ppm at 40 m in the atmosphere. The diurnal variation of vertical profiles of $CO_2$ concentration shows very interesting features with season. At all eight levels, diurnal variation of $CO_2$ concentration showed little change in winter. In spring, the diurnal variations of $CO_2$ concentration at 8 levels showed three distinct groups of layers with height: the first layer: 0.1m (near surface), second layer: 1.0 m and 4.0m (below canopy) and the third layer: 7.4m to 40.7 m (near canopy and above). In summer, these three groups of layers were further separated with larger variations whereas such distinction became smaller in fall. The diurnal variation of $CO_2$ concentration in the first three layers near surface always showed higher concentration with larger variability. Typically, $CO_2$ concentration showed peaks in early morning and in the evening. After the evening peak, $CO_2$ concentration gradually increased except for those near the surface (i.e., 0.1, 1.0 and 4.0 m) where the concentrations actually decreased. We suspect that this could be attributed to the drainage flow of $CO_2$ along the hill slope from the headwater to downstream, which is not taken into account for net ecosystem $CO_2$ exchange. In comparison to the results of other studies, the distinct and different vertical structures of $CO_2$ concentrations observed at our site may be due to complex terrain and weak turbulent mixing under calm conditions at the site. The annual mean of diurnal variation of $CO_2$ storage flux from single level ranged from -0.6 to $0.9{\mu}mol\;m^{-2}s^{-1}$ and from multi-level from -1.2 to $1.0{\mu}\;{\mu}mol\;m^{-2}s^{-1}$. When compared against the results from the multi-level concentrations, the storage flux estimated from a single-level concentration was generally adequate except for specific hours near sunrise and sunset. Further details and their implication will be discussed in the presentation.

• The Journal of Korean Society for Radiation Therapy
• /
• v.32
• /
• pp.53-59
• /
• 2020

Purpose: The purpose of this study is to compare and analyze the difference between the MLC log file-based software (Mobius) and the conventional phantom-ionization chamber (ArcCheck) dose verification method according to the change of target volume. Material and method: Radius 0.25cm, 0.5cm, 1cm, 2cm, 3cm, 4cm, 5cm, 6cm, 7cm, 8cm, 9cm, 10cm with a Sphere-shaped target Twelve plans were created and dose verification using Mobius and ArcCheck was conducted three times each. The irradiated data were compared and analyzed using the point dose error value and the gamma passing rate (3%/3mm) as evaluation indicators. Result: Mobius point dose error values were -9.87% at a radius of 0.25cm and -4.39% at 0.5cm, and the error value was within 3% at the remaining target volume. The gamma passing rate was 95% at a radius of 9cm and 93.9% at 10cm, and a passing rate of more than 95% was shown in the remaining target volume. In ArcCheck, the average error value of the point dose was about 2% in all target volumes. The gamma passing rate also showed a pass rate of 98% or more in all target volumes. Conclusion: For small targets with a radius of 0.5cm or less or a large target with a radius of 9cm or more, considering the uncertainty of DQA based on MLC log files, phantom-ionized DQA is used in complementary ways to include point dose, gamma index, DVH, and target coverage. It is believed that it is desirable to verify the dose delivery through a comprehensive analysis.

• Journal of Nutrition and Health
• /
• v.53 no.6
• /
• pp.596-612
• /
• 2020

Purpose: This study was conducted to evaluate the dietary behaviors of preschool children using the nutrition quotient for preschoolers (NQ-P) and investigate factors that influence NQ-P in preschool children. Methods: Subjects were 214 parents with children aged 3-5 years residing in Busan and Gyeongnam, Korea. The survey was conducted from March to April, 2019 using a questionnaire that included demographic characteristics, the NQ-P questions, and health consciousness. All data was statistically analyzed by the SPSS program (Ver 25.0) and the statistical differences in variables were evaluated by the chi-square test, Fisher's exact test, t-test, one-way ANOVA, and Tukey's multiple comparison test. Results: The mean score of NQ-P of the total subjects was 58.28, which was within the medium-low grade. The mean score of 'balance' was 60.08, 'moderation' was 47.64, and 'environment' was 67.83. The analysis of related-factors influencing NQ-P scores showed that there was a significant difference according to the frequency of dining out. The scores of the NQ-P (p < 0.05), moderation (p < 0.001), and environment (p < 0.05) were significantly higher in the 1-2 times per week group compare to 3-4 times and 5-6 times per week group. The scores of NQ-P (p < 0.01), environment (p < 0.01) were significantly higher in the high group of parents' health consciousness compared to the those with low health consciousness. Conclusion: According to the results of the evaluation by NQ-P, the dietary behaviors of preschool children residing in Busan and Gyeongnam need to be improved and monitored. For improving their eating behavior and nutritional health status, preschool children and their parents need proper nutrition education programs.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.3
• /
• pp.1-10
• /
• 2021

This study aimed to evaluate preferences of Bukhansan dulegil using sentiment analysis, a natural language processing technique, to derive preferred and non-preferred factors. Therefore, we collected blog articles written in 2019 and produced sentimental scores by the derivation of positive and negative words in the texts for 21 dulegil courses. Then, content analysis was conducted to determine which factors led visitors to prefer or dislike each course. In blogs written about Bukhansan dulegil, positive words appeared in approximately 73% of the content, and the percentage of positive documents was significantly higher than that of negative documents for each course. Through this, it can be seen that visitors generally had positive sentiments toward Bukhansan dulegil. Nevertheless, according to the sentiment score analysis, all 21 dulegil courses belonged to both the preferred and non-preferred courses. Among courses, visitors preferred less difficult courses, in which they could walk without a burden, and in which various landscape elements (visual, auditory, olfactory, etc.) were harmonious yet distinct. Furthermore, they preferred courses with various landscapes and landscape sequences. Additionally, visitors appreciated the presence of viewpoints, such as observation decks, as a significant factor and preferred courses with excellent accessibility and information provisions, such as information boards. Conversely, the dissatisfaction with the dulegil courses was due to noise caused by adjacent roads, excessive urban areas, and the inequality or difficulty of the course which was primarily attributed to insufficient information on the landscape or section of the course. The results of this study can serve not only serve as a guide in national parks but also in the management of nearby forest green areas to formulate a plan to repair and improve dulegil. Further, the sentiment analysis used in this study is meaningful in that it can continuously monitor actual users' responses towards natural areas. However, since it was evaluated based on a predefined sentiment dictionary, continuous updates are needed. Additionally, since there is a tendency to share positive content rather than negative views due to the nature of social media, it is necessary to compare and review the results of analysis, such as with on-site surveys.

• Korean Journal of Environment and Ecology
• /
• v.35 no.3
• /
• pp.256-264
• /
• 2021

Rapid urbanization around the world has negatively affected wildlife habitats, including birds. Wild birds settled in the city are adapting to the changed surroundings, and are typically known to make nests using materials that are easy to find around the city. This study was conducted for the purpose of analyzing the nesting materials on the Paridae using artificial bird nests installed in cities. In this study, the researchers established a total of 33 artificial bird nests in urban parks (22) and forests (11) in Cheonan-si, Chungcheongnam-do. Then we collected 4 artificial bird nests in urban parks (18.19%) and 5 in urban forests (45.46%) to compare the characteristics of bird nest materials by the nest, species, and urban green area types. Eight nests, excluding a nest abandoned by a pair of Paridae, were used for the material analysis. The collected nests were dried, and classified into natural materials (vegetable materials, animal materials, moss, and soil) and artificial materials (cotton, paper pieces, plastics, vinyl, and synthetic fibers), and then each nest was weighed. The classification result shows that the portion of moss (50.65%) was the highest in all nests, followed by soil (21.43%), artificial material (13.95%), vegetable material (5.78%), animal material (4.57%), and others (3.59%) in that order. Artificial materials were used in all nests in urban green areas. Moreover, although the Paridae used about 5.16% more vegetable material than the Parus varius, it was not significant (t=2.17, p=0.07). Plant materials and soil were most preferred in urban forests, and moss, animal, and artificial materials were widely used in that order in urban parks. There was a significant difference in the use of vegetable materials between urban parks and urban forests (t=3.07, p<0.05^*). In the habitats like urbanized and dry areas, where artificial materials are highly accessible, artificial materials replaced some roles of natural materials. This study is a basic study for the analysis of the types of materials used in artificial bird nests to understand the habitat system of urban ecosystems. It can be used as the basic data for ecological studies and conservation of the Paridae species.

• Clean Technology
• /
• v.28 no.1
• /
• pp.79-93
• /
• 2022

In this study, an electronics industrial wastewater activated sludge model (e-ASM) to be used as a Water Digital Twin was calibrated based on real high-tech electronics industrial wastewater treatment measurements from lab-scale and pilot-scale reactors, and examined for its treatment performance, effluent quality prediction, and optimal process selection. For specialized modeling of a high-tech electronics industrial wastewater treatment system, the kinetic parameters of the e-ASM were identified by a sensitivity analysis and calibrated by the multiple response surface method (MRS). The calibrated e-ASM showed a high compatibility of more than 90% with the experimental data from the lab-scale and pilot-scale processes. Four electronics industrial wastewater treatment processes-MLE, A2/O, 4-stage MLE-MBR, and Bardenpo-MBR-were implemented with the proposed Water Digital Twin to compare their removal efficiencies according to various electronics industrial wastewater characteristics. Bardenpo-MBR stably removed more than 90% of the chemical oxygen demand (COD) and showed the highest nitrogen removal efficiency. Furthermore, a high concentration of 1,800 mg L^-1 T MAH influent could be 98% removed when the HRT of the Bardenpho-MBR process was more than 3 days. Hence, it is expected that the e-ASM in this study can be used as a Water Digital Twin platform with high compatibility in a variety of situations, including plant optimization, Water AI, and the selection of best available technology (BAT) for a sustainable high-tech electronics industry.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.37 no.4
• /
• pp.217-224
• /
• 2021

Purpose: The purpose of this study was to evaluate the porosity of resin modified glass ionomer (RMGI) by different mixing methods. Materials and Methods: Five specimens were prepared for each groups according to capsules and mixing methods. Two RMGI capsule and two mixing machines were used for this study. One resin-modified glass ionomer cement is Fuji II LC (F2LC) and the other is Photac Fil Quick Aplicap (PFQ). For Mixing of RMGI capsule, Rotomix using rotating motion and CM-II using shaking motion were used. After measuring height, radius and mass of specimens, Density was calculated. And porosity was measured using micro-computed tomography (micro-CT). All data were statistically analyzed using T-test, two-way ANOVA to compare between groups at 95% significance level to evaluate the affect of capsule and mixing method on the porosity. Results: The porosity was observed in all specimens generally. And there is significant differece between porosities according to RMGI capsule and Mixing method. The porosity of PFQ was lower than that of F2LC and the porosity of Rotomix was lower than that of CM-II. Conclusion: There was a difference of porosity according to kind of capsules and mixing methods. When using same capsule, less porosity was observed on PFQ than F2LC. When using same mixing mehod, less porosity was observed on Rotomix than CM-II. Using mixing machine of same coporation as that of RMGI capsule did not lead to lower porosity. Therefore, Selecting optimal mixing machine is important.

• Korean Journal of Environment and Ecology
• /
• v.36 no.3
• /
• pp.257-276
• /
• 2022

Studies on rare and endemic plant conservation should be performed nationally to conserve plant diversity. Studies targeting a specific taxon have been reported based on the necessity of conserving plant diversity. From this point of view, there is an increasing necessity to compare and evaluate the studies for conservation. Moreover, it is necessary to analyze and review the direction for study subjects and items required for effective conservation of rare and endemic plants in Korea, based on the analysis results of collected data. We analyzed trends of studies on rare and endemic plants worldwide. In particular, we collected and analyzed the study trend in Korea. Study fields of the rare and endemic plants were divided into six classifications, of which the conservation ecology classification was sub-divided into the species traits, population study, and biological interaction. We have collected conservation ecology studies showing significant differences in regions and countries. They have been actively conducted in Europe and North America by region and in Japan and the United States by country. On the contrary, studies on basic ecology accounted for the most, followed by conservation genetics and restoration ecology in Korea. It was revealed that the portion of conservation ecology conducted in Korea was lower than that of the world. Moreover, studies mainly focused on a specific taxon of rare and endemic plants, such as endangered plants designated by the Korean Ministry of Environment. Particularly in Korea, conservation genetics and restoration ecology studies accounted for high percentages. Considering the worldwide study trends, particularly those in Europe and North America that lead the study of conservation ecology, we suggest approaches to increase the percentages of conservation ecology, including securing the information on species traits, population structure and population dynamics, and interaction between animals and plants are necessary for effective conservation of rare and endemic plants in Korea.

• Journal of the Korean Society of Radiology
• /
• v.16 no.1
• /
• pp.67-75
• /
• 2022

The aim of this study is to establish a new QC method that can simultaneously evaluate the resolution of the x/y plane and the z-axis by producing a phantom that can reflect exposure and reconstruction parameter of MDCT system. It was used with Aquilion ONE(Cannon Medical System, Otawara, Japan), and the examination was scanned using of 120 kV, 260 mA, and the D-FOV of 300 mm². It produced new SSP phantom modules in which two aluminum plates inclined at 45° to a vertical axis and a transverse axis to evaluate high contrast resolution of x/y plane and z axis. And it changed factors such as the algorithm, distance from gantry iso-center. All images were reconstructed in five steps from 0.6 mm to 10.0 mm slice thickness to measure resolution of x/y plane and z-axis. The image data measured FWHM and FWTM using Profile tool of Aquarius iNtusion Edition ver. 4.4.13 P6 software(Terarecon, California, USA), and analysed SPQI and signal intensity by ImageJ program(v1.53n, National Institutes of Health, USA). It decreased by 4.09~11.99%, 4.12~35.52%, and 4.70~37.64% in slice thickness of 2.5 mm, 5.0 mm, and 10.0 mm for evaluating the high contrast resolution of x/y plane according to distance from gantry iso-center. Therefore, the high contrast resolution of the x/y plane decreased when the distance from the iso-center increased or the slice thickness increased. Additionally, the slice thicknesses of 2.5 mm, 5.0 mm, and 10.0 mm with a high algorithm increased 74.83, 15.18 and 81.25%. The FWHM was almost constant on the measured SSP graph for evaluating the accuracy of slice thickness which represents the resolution of x/y plane and z-axis, but it was measured to be higher than the nominal slice thickness set by user. The FWHM and FWTM of z-axis with axial scan mode tended to increase significantly as the distance increased from gantry iso-center than the helical mode. Particularly, the thinner slice thickness that increased error range compare with the nominal slice thickness. The SPQI increased with thick slice thickness, and that was closer to 90% in the helical scan than the axial scan. In conclusion, by producing a phantom suitable for MDCT detectors and capable of quantitative resolution evaluation, it can be used as a specific method in the management of research quality and management of outdated equipment. Thus, it is expected to contribute greatly to the discrimination of lesions in the field of CT imaging.