• 한국안전학회지
• /
• 제17권2호
• /
• pp.22-31
• /
• 2002

In present study, the deformation analysis and automotive body repair were analyzed with respect to collision types by case studies. As a result, lots of data for the automobile frame deformation caused by collision were collected and analyzed according to collision types. It was shown from the result that the frame deformation patterns were able to be roughly grouped by collision positions of vehicles. Repair plans of deformed frames could be carried on the measured data. It was shown that the deformed vehicle frames were sufficienty repaired to be normal in driving characteristics from the performance test of repaired vehicles.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.663-666
• /
• 2004

An analysis of the annual frequency of collapse(AF) is performed for each bridge pier exposed to ship collision. AF is computed for each bridge component and vessel classification. The summation of AFs computed over all of the vessel classification intervals for a specific component should equal the annual frequency of collapse of the component. The designer should use judgment in developing a distribution of the vessel frequency data based on discrete groupings or categories of vessel size by DWT. In the present study the effect of vessel classification on the annual frequency of collapse in the ship collision risk assessment is investigated by illustrative numerical examples based on the vessel frequency data of the domestic harbor. The DWT interval for larger vessels has more effect on the ship collision risk. Therefore the expert judgement in determining the larger DWT interval is required because the design impact lateral resistances of bridge components depend on the ship collision risk.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집 특별세미나,특별/일반세션
• /
• pp.233-237
• /
• 2009

In this study, we suggest that several approaches to evaluate the collision acceleration value of a car in the article 35 and the guideline 16 of Korean rolling stock safety regulation. There are various methods to evaluate collision acceleration such as; a displacement comparison method by the double integration of filtered acceleration data, a velocity comparison method by the integration of filtered acceleration data, an analysis method of time-velocity curve, or a differential method of time-velocity curve. We compared these methods one another using 1D dynamic simulation model composed of nonlinear dampers, springs and bars, and masses. Also, we applied these methods to a hybrid model, which is made of 3D shell element model and 2D collision dynamics model, in order to evaluate whether 1D force-displacement curve modeling for energy absorbing structures have an effect on the collision acceleration levels or not.

• 대한전자공학회논문지TC
• /
• 제44권10호
• /
• pp.47-54
• /
• 2007

시간 영역에서 나노 초 이하의 임펄스 신호를 이용한 초광대역 무선 통신 (Impulse-radio-based ultra wideband:IR-UWB 기술은 반송파 없이 통신을 진행하기 때문에 시간 축에서 데이터를 연속적으로 전송하지 않으며, 이러한 특징을 사용하면 다중 사용자 환경에서 패킷의 충돌을 효율적으로 조절 할 수 있다. 본 논문에서는 IR-UWB 환경을 분석하고, 이에 특화된 충돌 분산이라는 패킷의 충돌을 펄스의 충돌로 분해하는 새로운 패킷충돌 패러다임을 제시한다. 충돌 분산 방안에서는 각각의 노드가 독립된 펄스 간격으로 임의의 시간에 분산된 환경에서 데이터를 전송하며, 패킷의 충돌을 펄스의 충돌로 분해함으로써 패킷의 충돌로 인한 전체 패킷의 손실을 막을 수 있다. 또한 제시된 방안을 이용하여 패킷의 충돌로 인한 패킷 에러가 줄어들 수 있고, 데이터의 실시간 전송을 보장할 수 있음을 분석을 통해 제시하였다.

• 한국항해항만학회지
• /
• 제34권2호
• /
• pp.105-110
• /
• 2010

The studies on automatic ship collision avoidance system, which have been carried out in the last 10 years, are facing on new situation due to newly developed high technology such as computer and other information system. It was almost impossible to make it used in real navigation field 3-4 years ago because of the absence of any tool to give other ship's information, however recently developed technology suggests new possibility. This study is carried out to develop the automatic ship collision avoidance support system which considers ship's manoeuvrability into it's collision avoidance algorithm. One of the important part in ship collision avoidance system is collision decision module which can calculate collision risk with other ships and act properly to avoid the situation. Many of previous researches are using present ship's dynamic data such as present speed, position and course to calculate collision risk. However when a ship commences avoidance action, the real situation is quite different with one that has been estimated by the ship's initial data due to the ship's manoeuvring characteristic. Therefore it is better to take into account ship's manoeuvring characteristic from the stage of collision decision in ship collision avoidance system. In this study, these effects are included in the developed system. The proposed system are verified its usefulness in numerical simulation environments.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.77-82
• /
• 2006

Automatic vessel collision-avoidance systems have been studied in the fields of artificial intelligence and navigation for decades. And to facilitate automatic collision-avoidance decision-making in two-vessel-encounter situation, several expert and fuzzy expert systems have been developed. However, none of them can negotiate with each other as seafarers usually do when they intend to make a more economic overall plan of collision avoidance in the COLREGS-COST-HIGH situations where collision avoidance following the International Regulations for Preventing Collisions at Sea(COLREGS) costs too much. Automatic Identification System(AIS) makes data communication between two vessels possible, and negotiation methods can be used to optimize vessel collision avoidance. In this paper, a negotiation framework is put forward to enable vessels to negotiate to optimize collision avoidance in the COLREGS-COST-HIGH situations at open sea. A vessel vector space is defined and therewith a cost model is put forward to evaluate the cost of collision-avoidance actions. Negotiations between a give-way vessel and a stand-on vessel and between two give-way vessels are considered respectively to reach overall low cost agreements. With the framework proposed in this paper, two vessels involved in a COLREGS-COST-HIGH situation can negotiate with each other to get a more economic overall plan of collision avoidance than that suggested by the traditional collision-avoidance expert systems.

• 대한조선학회논문집
• /
• 제41권3호
• /
• pp.41-48
• /
• 2004

Ship is being operated under a highly dynamic environments and many factors are related with ship's collision and those factors are interacting. So, the analysis on ship's collision causes are very important to prepare countermeasures which will ensure the safe navigation. This study analysed the ship's collision data over the past 10 years(1991-2000), which is compiled by Korea Marine Accidents Inquiry Agency. The analysis confirmed that ‘ship's collision' is occurred most frequently and the cause is closely related with human factor. The main purpose of this study is to propose risk control measures of ship's collision. For this, the structure of human factor is analysed by the questionnaire methodology. Marine experts were surveyed based on major elements that were extracted from the human factor affecting to ship's collision. FSM has been widely adopted in modeling a dynamic system which is composed of human factors. Then, the structure analysis on the causes of ship's collision are performed using FSM. This structure model could be used in understanding and verifying the procedure of real ship's collision. Furthermore it could be used as the model to prevent ship's collision and reduce marine accidents.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2013년도 춘계학술대회
• /
• pp.169-171
• /
• 2013

The ships always have had the risk of collision. There are also a number of near-miss situations especially in the congested area such as port entrance, restricted waters and crossing point of the ship's route. In those areas, the navigator might have more stress than other areas. If the collision risk of decided area is calculated, it might be possible to analyse the human factors by using this data. It is also helpful for deciding a position of aids to navigation or any other system for the safety navigation. For this purpose, the model of collision risk with AIS data has been explained in this paper. The calculated result from the proposed model has been examined by using the simulation.

• 한국자동차공학회논문집
• /
• 제20권3호
• /
• pp.113-118
• /
• 2012

Collision detection plays a key role in collision mitigation system. The malfunction of the collision mitigation system can result in another dangerous situation or unexpected feeling to driver and passenger. To prevent this situation, the collision time, offset, and collision decision should be determined from the appropriate collision detection algorithm. This study focuses on a method to determine the time to collision (TTC) and frontal offset (FO) between the ego vehicle and the target object. The path prediction method using the ego vehicle information is proposed to improve the accuracy of TTC and FO. The path prediction method utilizes the ego vehicle motion data for better prediction performance. The proposed algorithm is developed based on laser scanner. The performance of the proposed detection algorithm is validated in simulations and experiments.

• 한국자동차공학회논문집
• /
• 제9권1호
• /
• pp.171-180
• /
• 2001

Collision accident reconstruction algorithm are developed based on the deformation shape and severity of a car body. At first, the body stiffness equation representing the force-deformation relationship is derived using finite element analysis for head on collision of two cars. The database of deformation shapes and energies is constructed for five different collision configurations; each configuration contains three velocity conditions. Deformation shapes are obtained using a curve fitting method and result in cubic polynomials. Deformation energies are calculated using a stiffness equation and deformation data. Three algorithms are developed to reconstruct collision configuration compared with constructed database. The developed algorithms show reasonably good performance to find collisions conditions for some test problems.