• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.1 s.35
• /
• pp.65-74
• /
• 2006

A rapidly developed satellite technology is used in comprehensive fields such as spatial data aquisition and applications. Especially a GPS positioning is expected to reinvigorate at the national reference system changes to ITRF(International Terrain Reference Frame). Currently the National Geographic Information Institute(NGII) issues a triangulation point coordinate by separating old and new coordinates and in the year of 2007 it will be scheduled to be changed ITRF. The triangulation point coordinate in Cheju area causes some problems due to the difference original observation and re-observation. Thus in this study a GPS observation is conducted after re-organizing geodetic network based on 1st and 2nd order triangulation in order to check the current triangulation points in Cheju area. After the GPS observation data analysis, stable points were extracted, proposed a geodetic network and its application.

• Journal of Aerospace System Engineering
• /
• v.18 no.1
• /
• pp.64-71
• /
• 2024

The external fuel tank of an aircraft is a main component that can increase the cruising range of the aircraft. It must be able to be stably separated from the pylon in an emergency situation. At this time, a separation load is applied to the fin and the pivot of the external fuel tank. To stably separate the external fuel tank, the structural soundness of the fin and the pivot must be confirmed. In this study, structural tests were conducted to verify the structural integrity of the external fuel tank pin and pivot when the external fuel tank was separated from the aircraft. Results are then presented. In this paper, a test configuration diagram consisting of the hydraulic and load control equipment, data acquisition system, and pneumatic supply unit used in the structural test was explained. Test installation and test load application plan for each test condition were provided. As results of the structural test, it was found that test load and internal pressure of the test specimen were properly controlled within the allowable range in each test. It was confirmed that serious structural defects in the test specimen did not occur under required load conditions. In conclusion, through structural test for design limit load and design ultimate load, it was proven that the fin and pivot of the external fuel tank for aircraft covered in this study had sufficient structural strength.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.555-560
• /
• 2003

Korean High Speed Train(KHST) has been tested on the high speed test line in Osung site of Korea High Speed Rail Construction Authority (KHRC). since it was developed as G7 Project Plan In 2002. This paper introduces the dynamic test devices in KHST and shows the comparison between the results of test and theoretical computing results which derive from the new model for KHST dynamic behavior. Previous computer simulation model for KHST was developed to review wether the vehicle system was satisfied with the dynamic performance requirements during the design procedure. But It should be applied the results of the parts test for suspension elements in order to compare between the results of computation and real test. Using VAMPIRE Program made by AEA Technology in UK. the new model also was modified. This paper shows that the static wheel loads calculated from new model is similar to test results. For test on high speed line, we prepared the test devices for evaluating the dynamic performances. which was consisted of the accelerometers( based on Kisler Co.) and the data aquisition systems (based on National instrument Co.), and test program coded by LabView 6i program. These lest devices and programs are flexible to extension the channels for adding sensors and connect to the ethernet network. The acceleration of car bodies, bogie frames and axle boxes were compared between the results of computation and test at 150km/. This paper shows that the results of test were high in high frequency band range but similar frequency band range. It might be considered that these differences were caused by the test which did not performed at constant speed for comparison analysis. Also. It will be able to understand the differences and make better results through a lot of tests planed in future.

• Korea Journal of Hospital Management
• /
• v.10 no.1
• /
• pp.93-114
• /
• 2005

The prenatal care is the preventive medical service to help the pregnant mother deliver the healthy baby. It's regular examines give some chances to check-up the healthy conditions. This thesis concentrates on the CRM system to support an effective prenatal care system and prove the effectiveness of it. As CRM is the adapted management related to the customer's own information, it is important to develop the CRM model classified by the patients characteristics. A general hospital in Busan operated the CRM system to carry out the effective prenatal care and there is an analysis to ensure the effectiveness of CRM system for the pregnant women in our maternity ward. The results can be summarized as follows: 1) According to the comparisons with the CRM system, we can conclude the system is desirable. (1) Maternal Age : In the age distribution, the prenatal visit frequency, triple marker freqency, oral GTT and targeted ultrasonography in the experimental group in 30 to 34 years old is higher on the whole. For over 35 years old group, the higher frequency comes out in the oral GTT and targeted ultrasonography and for 25 to 29 years old group the different figure shows just in the targeted ultrasonography. (2) Area of residence: There is a clear difference in all the items in Busan and near area but no sign of difference in prenatal visits and oral GTT in other residencial area. Especially in the targeted ultrasonography the higher figure shows in the experimental group located in the both areas. The targeted ultrasonography is known as the specific examination which should be examined by the specialists, on the contrary the other examinations can be operated in the small clinic. So the public information and seminars related with ultrasonography increases the check-up frequency. The clinic requests some ultrasonographical examinations to the specialists in general hospital. (3) Parity: The clear difference shows that the CRM system causes the prenatal visit frequency to become higher in experimental group. The figure is 9.7 times and 8.6 times each. This is opposite that the past study said multiparity reduced the average prenatal visits. But the result of CRM is considered as the method to help the multiparity understand the importance of the prenatal care. (4) Obstetrical history: In the experimental group of the spontaneous delivery group, the figure is higher in the prenatal visit frequency, triple marker, oral GTT and targeted ultrasonography but the Caesarean section delivery group has higher figure in targeted ultrasonography. (5) In the first check-up, the rate of targeted ultrasonography in under 16 week pregnancy, in the 16 week pregnancy to 32 week pregnancy and the over 32 week pregnancy in the experimental group is upper than the compared one. For the oral GTT, there is a difference in under 16 week pregnancy but no difference in prenatal visits and triple marker. 2) The analysis of characteristics of prenatal care through the decision tree resulted in the fact that the most important variable is the residential area. After the delivery frequency is following, the obstetrical history and maternal age are in order. It is the same result in the triple marker and oral GTT. Consequently it is the same order of important variables in CRM system. The effectiveness of CRM system is proved in this study. The CRM system is a marketing method to control and lead the customers through the segmentation of customer data. It increases the new customer aquisition, maintenance of loyal customers, augmentation of customers value, activation of potential customers and creation of life time customers. So eventually it can enlarge the customers value. The medical institution should make efforts to establish the data base enforced by the customer's information on the underlying ordinary data system to carry out the CRM system effectively. In addition, it should develop the a variety of marketing strategy in order to set up one to one marketing satisfying the needs of individual patients.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.4
• /
• pp.171-188
• /
• 2013

Landuse changes and cadastral information error categories in the four major river areas were analyzed for the use of policy data as cadastral re-arrangement of national and public lands would be required, using high-resolution air-photographs and cadastral maps before and after the river development. The study sites were the river areas of 40km around four dams of the Nakdong river where their landuses were changed most. As the results, national and public lands reached 79.9% of land parcels and 93.3% of land areas of the study sites similar with those of the four river areas, 84.3% of land parcels and 85.5% of land areas. The landuse classification of the study sites before the four river development was consisted most of 'river'(71.6%) and 'rice field'(12.3%), but after the development the 'river' was reduced to 42.7% and 'park area'(19.6%) including sport fields and 'mixed lots'(20.8%) were increased. Also, 86.7% of land parcels before the development could be reduced after the development if administrative districts and land ownerships were not considered. Cadastral information error categories can be found as cadastral polygon missing, polygon overlap, location and boundary non-coincidence, small polygon generation, and non-coincidence between cadastral boundary and river boundary. Landuse change monitoring method using air-photographs will be useful to analyze landuse state through fast information aquisition and to manage properties of national and public lands such as river areas.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.6
• /
• pp.26-37
• /
• 2008

The purpose of the study was to evaluate the effect of pervious pavements on reducing the surface runoff caused by rainfall. The surface runoff from twelve steel experimental beds with different pavement had been recorded every minute from May to September 2008, by the measuring system of tipping buckets(0.1mm/count) and data aquisition systems(National Instrument's Labview and DAQ boards & Autonics PR12-4). The dimension of the experimental bed was $1.5m(W){\times}2.0m(L){\times}0.6m(D)$ and eleven different kinds of vegetational(grass, grass+cubic stone, grass+hole brick), modular(brick, cubic stone, small cubic stone, wood block, interlocking block, clay brick, granular clay brick) and granular(naked soil, gravel) paving materials and concrete were applied for the comparison. Six rain events with depth over 30mm were selected and compared. The maximum depth of the rainfall selected was 137.5mm for 28 hours, and the minimum 30mm for 5 hours. The maximum rainfall per hour was 23mm/hr and the minimum 11.4mm/hr. The major findings were as follows; 1. All pervious pavement applied reduced over 75% of the surface runoff compared with concrete pavement. The grassy and porous pavements were relatively efficient in reducing surface runoff. 2. The grass was the more efficient as intercepting average 69.5mm of initial surface runoff, and maximum 77.8mm at the condition of 13.5mm/hr rainfall. The next was gravel intercepting maximum 65.5mm at the condition of 13.5mm/hr and the 40.9mm at 19.1mm/hr, average 55.7mm. 3. The modular pavements common in urban area were not good in intercepting the runoff except the 'clay granular brick' compared with others. The 'clay granular brick' showed relatively efficient intercepting average 14.1mm, which was the bigger amount than the 'grass+hole brick'. 4. The 'naked soil' were more effective than the 'concrete', 'brick', and 'interlocking block' in reducing the surface runoff, but less efficient than other materials. The capacity of the 'naked soil' to intercept the initial rainfall was similar to the 'brick'. As summary, the more grassy and porous pavement shows more effective in reducing surface runoffs.

• Journal of radiological science and technology
• /
• v.35 no.3
• /
• pp.265-273
• /
• 2012

Aquisition of accurate beam data is very important to calculate a reliable dose distribution of the treatment planning system for small radiation fields in intensity-modulated radiation therapy(IMRT) and stereotactic radiosurgery(SRS). For the measurement of small fields, the choice of a suitable detector is important due to the shape gradient in profile penumbra, the lack of lateral electronic equilibrium, and the effect of effective detector volume. Therefore, this study was to analyze the dosimetric characteristics of various detectors in measurement of beam data for small fields of linear accelerator. 0.01cc and 0.13cc ion chambers (CC01 and CC13) and a stereotactic diode detector(SFD) were used for measurement of small fields. The beam data, including the percent depth dose, output factor, and beam profile were acquired under 6 MV and 15 MV photon beams. Measurements were performed with the field size ranging from $2{\times}2cm^2$ to $5{\times}5cm^2$. For $2{\times}2cm^2$ field size, the differences of the ratios of $PDD_{20}$ and $PDD_{10}$ measured by CC01 and SFD detectors were 1.02% and 0.12% for 6 MV and 15 MV photon beams, respectively. For field sizes larger than $3{\times}3cm^2$, the differences of values of $PDD_{20}/PDD_{10}$ obtained from each detector were 1.15% and 0.71% for 6 MV and 15 MV photon beams, respectively. The output factors obtained from CC01 and SFD for $2{\times}2cm^2$ field size were within 0.5% and 1.5% for 6 MV and 15 MV, respectively. The differences in output factor of three detectors for $3{\times}3cm^2$ to $5{\times}5cm^2$ field sizes were within 0.5%. Profile penumbras measured by the SFD, CC01, and CC13 detectors at three depths were average 2.7 mm and 3.5 mm, 3.4 mm and 4.3 mm, and 5.2 mm and 6.1 mm for 6 MV and 15 MV photon beams, respectively. In conclusion, it could be possible to use of the CC01 and SFD detectors for the measurement of percent depth dose and output factor for $2{\times}2cm^2$ field size, and to use of three detectors for $3{\times}3cm^2$ to $5{\times}5cm^2$ field sizes. CC01 and SFD detectors, consider ably smaller than the radiation field, should be used in order to accurately measure the profile penumbra for small field sizes.