• Korean Journal of Food Science and Technology
• /
• v.4 no.1
• /
• pp.18-23
• /
• 1972

Fried instant noodles, manufactured on laboratory scale, preserved in sunlight, room temperature, removed package, at $30{\pm}2^{\circ}C$ and corrugated fiber board box to investigate the oxidative stability of fried products under a few factors of storage for 150 days. And obtained results were as follow. 1) Peroxide value P.O.V. and Acid value A.V. of fried instant noodles were increased slightly during the storage in orange color polycello package in the corrugated fiber board box in the dark room as shown in Fig. 1 and 2. They had not rancid odor and showed P.O.V. 18.8 after 150 days. 2) Preserving in room temperature removed package or with polycello package exposed to sunlight, P.O.V. and A.V. increased rapidly up to 100, 5 and they had rancid odor within 30 days. 3) Peroxide value showed increasing tendency on the storage at $30{\pm}2^{\circ}C$ and scattered light and rancid odor appeared from 90 to 120 days. 4) As peroxide value and refractive index increased, iodine value were decreased as Fig. 3. 5) In these test, P.O.V. is correlated with the organoleptic evaluation of rancidity however, they were not coincided exactly.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.63 no.3
• /
• pp.175-185
• /
• 2018

The aim of this study was to evaluate the variation of growth and quality characteristics in colored rice from 178 accessions and to develop useful, basic rice breeding data by classifying these germplasm characteristics via principal component (PC) analysis. The coefficient of variation of the 178colored rice accessions were the highest for panicle length (PL) and protein contents, followed by length-width ratio (LWR), 1000-grain weight (TGW), culm length (CL), and amylose contents, whereas the lowest was for the number of panicles per hill (NP), which is a yield component. The results from the PC analysis exhibited eigenvalues and contributions respective to each PC as follows: PC1, 2.06 and 29.49%; PC2, 1.31 and 18.75%; PC3, 1.21 and 17.36%; PC4, 1.01 and 14.38%. The eigenvalues of four PCs were over 1.0, and their cumulative contributions were 79.98%, which completes the necessary condition for evaluation of the 178 colored rice accessions. Cluster analysis showed cluster I as the largest, which included 79 accessions, while clusters II, III, IV, V, VI, and VII comprised 46, 19, 13, 4, 8, and 9 accessions, respectively. Moreover, dark brown accessions were dispersed in clusters I and II, and many resources of purple seed coat color were found in clusters V, VI, and VII. Particularly, cluster V had resources of only black and purple seed coat colors. Resources of cluster VII were found to have a relatively small average CL, PL, and LWR; notably, cluster V had the smallest average TGW, and cluster IV the lowest NP but the highest TGW. Finally, considering the yield potential, growth characteristics, heading stage, and color during breeding of colored rice, we obtained the following conclusions: cluster VII is suitable for breeding of colored rice; cross breeding among clusters I, II, and VII has a high yield potential; and it is possible to produce a superior color by cross breeding plants from cluster V and VI.

• Journal of Sensor Science and Technology
• /
• v.4 no.1
• /
• pp.3-8
• /
• 1995

n-ITO/p-PSL heterojunction photodetector have been fabricated on the Si wafer by using ITO(indium tin oxide) and PSL(porous silicon layer). They were anodized selectively by using silicon nitride and Ni-Cr/Au and were passivated by using ITO as well as being isolated by using mesa structure. With white light from 0 to 3000 Lux, the photocurrent varied linearly with incident light intensity. The reverse characteristics of fabricated devices were very stable up to a bias voltage of -40V and dark current density was about $40nA/mm^{2}$. When the device was exposed by Xe lamp whose wavelength range from 400nm to 1100nm, the maximum photo responsivity was about 0.6A/W between 600 and 700nm. Variation of the characteristics of fabricated devices after 5 weeks was negligible.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.120-120
• /
• 1999

III-nitride계 물질들은 blue와 UV 영역의 LED, LD와 같은 광소자뿐만 아니라 HBT, FET와 같은 전자소자로도 널리 응용되고 있다. 이와 같은 물질을 이용한 소자를 제작할 수 있는 낮은 저항의 ohmic contact은 필수적이다. Al이나 Ti와 같은 물질을 기초로 한 n-GaN의 경우는 이미 많은 연구결과가 발표되어 전기적 광학적 소자를 동작하는데 충분히 낮은 ohmic contact저항( )을 었다. 그러나 p-GaN의 ohmic contact은 아직까지 많은 문제점을 내포하고 있다. 그 중의 하나는 높은 doping 농도( )의 p-GaN 박막을 성장하기가 어렵다는 것이며, 또 하나는 낮은 접촉 비저항을 얻기 위해선 7.5eV이상의 큰 재가 function을 지닌 금속을 선택해야 한다. 그러나 5.5eV 이상의 재가 function을 갖는 금속은 존재하지 않는다. 위와 같은 문제점들은 p-GaN의 접촉 비저항이 이상의 높은 값을 갖게 만들고 있으며, 이에 대한 해경방안으로는 고온의 열처리를 통하여 p-GaN와 금속 사이에서 화학적 반응을 일으킴으로써 표면 근처에서 캐리어농도를 증가시키고, 캐리어 수송의 형태가 tunneling 형태로 일어날 수 있도록 하는 tunneling current mechanism을 이용하는 것이다. 이로 인해 결국 낮은 접촉 비저항을 얻을 수 있게되며, 일반적으로 p-GaN에서는 Nidl 좋은 물질로 알려져 있다. 그러나 Ni은 50$0^{\circ}C$이상의 열처리에서 쉽게 산화되는 특성 때문에 높은 캐리어를 얻는데 어려운 문제점이 있다. 이에 본 연구에서는 MBE로 성장된 p-GaN박막을 Mg의 activation을 더욱 증가시키기 위해 N2 분위기에서 15분간 90$0^{\circ}C$에서 annealing을 하였으며, ohmic 접촉을 위한 금속으로 높은 재가 function과 좋은 adhesion 그리고 낮은 자체저항을 가지고 있는 Ni/Au를 ohmic metal로 하여 contact한 후에 90$0^{\circ}C$에서 10초간 rapid thermal annealing (RTA)처리를 했다. 성장된 박막의 광학적 성질은 PL로써 측정하였으며, photoconductivity 실험을 통해 impurity의 life time을 분석하였고, persistent photoconductivity를 통해 dark current를 측정하였다. 또한 contact resistance를 계산하기 위해 circular-TLM method을 이용하여 I-V 특성을 조사하였다.

• Economic and Environmental Geology
• /
• v.21 no.3
• /
• pp.257-268
• /
• 1988

The Mugeug gold deposits is consisted of more than fourteen gold and silver-bearing quartz veins emplaced in Mesozoic granodiorite mass. In the Samhyungje vein, one of the representative vein in the mine, six stages of mineralizatidns are recognized: Stage I, deposition of base-metal sulfides and gray quartz; stage II, deposition of base-metal sulfides, electrum and white quartz with pinkish tint; stage m, deposition of base-metal sulfides and dark gray quartz; stage N, deposition of native silver, argentite, Ag-tetrahedrite, polybasite, arsenpolybasite and quartz; stage V, deposition of nearly barren quartz; stage VI, deposition of transparent quartz veinlets with minor pyrite. Ag contents of electrum increase steadily from stage II to stage N; 57.25-61.44 atom. % for stage II, 62.85-69.66 atom. % for stage m, 69.79-74.12 atom. % for stage N. Homogenization temperatures of fluid inclusions are as follows; stage II, from $194^{\circ}$ to $287^{\circ}C$; stage V, from $137^{\circ}$ to $171^{\circ}C$, stage VI, from $192^{\circ}$ to $232^{\circ}C$. Salinities of fluid inclusions range from 3.7 to 7.9 wt.% equivalent NaCl in stage II and from 0.8 to 4.3 wt.% equivalent Nael in stage V. Ore mineralogy suggest that temperature and sulfur fugacity declined steadily from $290^{\circ}$ to $150^{\circ}C$ and from $10^{-10.5}$ to $10^{-19.0}$atm. through stage II into stage N. Fluid pressure during stage II inferred from data of mineral assemblages and fluid inclusions is 370bar.

• Horticultural Science & Technology
• /
• v.32 no.3
• /
• pp.318-329
• /
• 2014

In order to gain insight into the physiological responses of plants to high temperature stress, the effects of temperature on Chinese cabbage (Brassica campestris subsp. napus var. pekinensis cv. Detong) were investigated through analyses of photosynthesis and chlorophyll fluorescence under 3 different temperatures in the temperature gradient tunnel. Growth (leaf length and number of leaves) during the rosette stage was greater at ambient $+4^{\circ}C$ and ambient $+7^{\circ}C$ temperatures than at ambient temperature. Photosynthetic $CO_2$ fixation rates of Chinese cabbage grown under the different temperatures did not differ significantly. However, dark respiration rate was significantly higher in the cabbage that developed under ambient temperature relative to elevated temperature. Furthermore, elevated growth temperature increased transpiration rate and stomatal conductance resulting in an overall decrease of water use efficiency. The chlorophyll a fluorescence transient was also considerably affected by high temperature stress; the fluorescence yield $F_J$, $F_I$, and $F_P$ decreased considerably at ambient $+4^{\circ}C$ and ambient $+7^{\circ}C$ temperatures, with induction of $F_K$ and decrease of $F_V/F_O$. The values of RC/CS, ABS/CS, TRo/CS, and ETo/CS decreased considerably, while DIo/CS increased with increased growth temperature. The symptoms of soft-rot disease were observed in the inner part of the cabbage heads after 7, 9, and/or 10 weeks of cultivation at ambient $+4^{\circ}C$ and ambient $+7^{\circ}C$ temperatures, but not in the cabbage heads growing at ambient temperature. These results show that Chinese cabbage could be negatively affected by high temperature under a future climate change scenario. Therefore, to maintain the high productivity and quality of Chinese cabbage, it may be necessary to develop new high temperature tolerant cultivars or to markedly improve cropping systems. In addition, it would be possible to use the non-invasive fluorescence parameters $F_O$, $F_V/F_M$, and $F_V/F_O$, as well as $F_K$, $M_O$, $S_M$, RC/CS, ETo/CS, $PI_{abs}$, and $SFI_{abs}$ (which were selected in this study), to quantitatively determine the physiological status of plants in response to high temperature stresses.

• Journal of Astronomy and Space Sciences
• /
• v.35 no.3
• /
• pp.201-210
• /
• 2018

The characterization of detectors installed in space- and ground-based instruments is important to evaluate the system performance. We report the development of a detector performance test system for astronomical applications using the Andor iKon M CCD camera. The performance test system consists of a light source, monochromator, integrating sphere, and power meters. We adopted the Czerny-Tuner monochromator with three ruled gratings and one mirror, which covers a spectral range of 200-9,000 nm with a spectral resolution of ~1 nm in the visible region. Various detector characteristics, such as the quantum efficiency, sensitivity, and noise, can be measured in wide wavelength ranges from the visible to mid-infrared regions. We evaluated the Korea Astronomy and Space Science Institute (KASI) detector performance test system by using the performance verification of the Andor iKon-M CCD camera. The test procedure includes measurements of the conversion gain ($2.86e^-/ADU$), full well capacity ($130K\;e^-$), nonlinearity, and pixel defects. We also estimated the read noise, dark current, and quantum efficiency as a function of the temperature. The lowest measured read noise is $12e^-$. The dark current at 223 K was determined to be $7e^-/s/pix$ and its doubling temperature is $5.3^{\circ}C{\pm}0.2^{\circ}C$ at an activation energy of 0.6 eV. The maximum quantum efficiency at 223 K was estimated to be $93%{\pm}2%$. We proved that the quantum efficiency is sensitive to the operating temperature. It varies up to 5 % in the visible region, while the variation increases to 30 % in the near-infrared region. Based on the comparison of our results with the test report by the vendor, we conclude that our performance test results are consistent with those from the vendor considering the test environment. We also confirmed that the KASI detector performance test system is reliable and our measurement method and analysis are accurate.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.1
• /
• pp.123-127
• /
• 2007

Up sizing of dye-sensitized solar cell(DSC) is the important technology to bring about commercialization of DSC. Several studies to obtain a stable large area DSC have been investigated in overseas laboratories, but have been hardly done in our country. In this study, up sizing technology of dye sensitized solar cells(DSCs) was investigated. We investigated low dark current materials for the current collecting grid. From the result, a new DSC module with metal grid was designed, and fabricated. For a new interconnection, both working and counter electrodes are alternately coupled on 10[cm]$\times$7[cm] substrate. We have achieved 68% of fill factor and photoelectric conversion efficiency of around 2.6% as the best results of new designed DSC structure.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.04b
• /
• pp.72-76
• /
• 2004

본 논문은 CdS의 소성 온도가 방사선 검출 특성에 미치는 영향을 조사하였다. CdS 센서는 스크린 프린터 방식을 이용해 $40{\mu}m$의 두께로 제조하였다. XRD 와 SEM을 이용하여 형성된 CdS 필름의 구조 및 형상을 분석하였다. 제조된 CdS 센서에 대해 X선 반응 특성을 조사하기 위해 I-V 측정을 수행하였다. 인가 전압에 따른 Dark current, x-ray sensitivity 및 선량에 따른 Linearity을 측정한 결과 CdS 센서가 $450^{\circ}C$이상 소성시 방사선에 대한 우수한 검출 특성을 보였다.

• YAKHAK HOEJI
• /
• v.33 no.4
• /
• pp.211-218
• /
• 1989

Twenty-six injectable drug products, many of which are administered by i.v. infusion, were studied for loss from aqueous solutions stored in polyvinyl chloride (PVC) infusion bags for various periods of time. The PVC infusion bags were stored in the dark room at room temperature for up to one month. Drugs stored in glass bottle served as controls. The solutions were assayed Spectrophotometrically at regular intervals. The effect of drug concentration and pH on the loss of drug from solution were studied. Octanol-water partition coefficients were used as a guage of lipid solubility of drugs. The elution of di(2-ethylhexyl)phthalate(DEHT) from PVC infusion bags was studied. For most of the drug studied, minimal loss from the aqueous solutions were observed over periods of storage time. Six of the drug products - Thiopental sodium, Hydralazine HCl, Thioridazine HCl, Trifluoperazine 2HCl, Metronidazole, Chlorpromazine HCl - were found to be lost a substantial extent. DEHP was found to be migrating from PVC infusion bags.