• 제목/요약/키워드: Damper spring

검색결과 406건 처리시간 0.028초

유전 알고리즘에 의한 배관 지지대의 최적배치 (Optimum Allocation of Pipe-suport by Genetic algorithm (2nd Reports, In Case of Seismic Excitation))

  • 양보석;전상범;유영훈;김진욱
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 1997년도 춘계학술대회논문집; 경주코오롱호텔; 22-23 May 1997
    • /
    • pp.128-132
    • /
    • 1997
  • This paper deals with the optimization of pipe-support allocation using the genetic algorithm, and shows the feasibility of the optimization method to actual design problems and also the convergence characteristics of optimization calculation with respect to the various seismic waves. The piping system was modeled as mass-spring system with 5 degrees of freedom and the support was as spring-damper. The support allocation problem was formulated to minimize the response of the piping system to seismic excitation.

  • PDF

제한진폭 능동형 질량동조감쇠장치 (Restrained Stroke Active Tuned Mass Damper)

  • 권장섭;장승필;유홍
    • 한국지진공학회논문집
    • /
    • 제9권3호
    • /
    • pp.9-22
    • /
    • 2005
  • 토목구조물에 능동형 질량동조감쇠장치를 설치할 경우에 설치장소의 크기는 제한되며 그에 따라 질량감쇠증기의 최대진폭이 제한되는 것이 일반적이다. 이 연구에서는 벽체 스프링과 고정장지를 이용하여 능동형 질량동조감쇠장치의 진폭을 제한하면서도 제어성능을 적절히 유지시킬 수 있는 제한진폭 능동형 질량동조감쇠장 치를 제안하였다. 이 제어장치는 질량감쇠장치의 진폭이 작을 경우에는 일반적인 능동형 질량동조감쇠장치로 작동하고 진폭이 정해진 값을 초과하면 제한진폭 능동형 질량동조감쇠장치로 작동하게 된다. 이러한 동작원리의 수학적 정식화를 통하여 새로운 제어 알고리즘을 제시하였다. 제한진폭 능동형 질량동조감쇠장치의 다양한 설계인자에 대한 파라미터 연구를 수행하였고, 그 성능을 기존의 능동형 질량동조감쇠장치와 비교하여 살펴보았다. 제한진폭 능동형 질량동조감쇠장치의 정현하중 및 충격하중에 대하여 일반적 능동형 질량동조감쇠장치와 비교하여 제어효과가 크게 떨어지지 않으면서 질량감쇠장치의 최대진폭을 상당히 줄일 수 있어 그 유용성을 확인할 수 있었다. 랜덤하중에 대한 해석의 경우는 질량감쇠장치의 최대진폭이 크게 감소하면서 주구조물의 최대진폭은 거의 증가되지 않는 개선된 결과가 관찰되었다.

구조물 내진보강을 위한 다중 마찰댐퍼의 성능 평가 (Performance Evaluation of Multi-Friction Dampers for Seismic Retrofitting of Structures)

  • 김성배;권형오;이종석
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제26권6호
    • /
    • pp.54-63
    • /
    • 2022
  • 이 연구는 구조물 내진보강 장치의 하나인 마찰댐퍼에 관한 것으로, 내부 마찰재를 복합재료의 일종인 초고분자량 폴리에틸렌으로 대체하여 댐퍼를 개발하였다. 또한 마찰력이 발생하는 내부 구조를 여러 층으로 적층하는 다중 마찰방식을 적용하였다. 개발된 다중 마찰댐퍼의 성능 검증을 위해서 재료에 대한 기초 물성과 마모 특성, 디스크 스프링에 대한 특성 분석 시험을 수행하였다. 마모시험 시험결과, UHMWPE의 질량 감소율은 0.003%로 복합재료 기반의 마찰재 중에서 가장 우수한 성능을 보였다. 디스크 스프링은 유한요소해석과 시험결과로부터 설계기초자료를 확보하였다. 또한 개발된 다중 마찰댐퍼의 품질 안정성을 확인하기 위해 토크값에 따른 마찰력 변화와 감쇠장치에 대한 지진하중 시험을 수행하였다. 품질성능 시험결과, 토크 값 조절에 따라 선형적인 마찰력 변화를 보였으며, 지진하중 시험 결과, 마찰댐퍼의 허용오차는 설계기준에서 요구하는 15% 미만으로 나타나 내진보강 장치로서의 요구조건을 만족하는 것으로 나타났다.

보통중심가새골조의 내진보강을 위한 자가복원형 점성감쇠기 시스템 개발 (Development of Self-centering Viscous Damper System for Seismic Retrofit of Ordinary Concentrically Braced Frame)

  • 김도연;최혁순;강주형;이용선
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제27권6호
    • /
    • pp.70-78
    • /
    • 2023
  • 보통중심가새골조는 단순한 설계절차를 갖는 이점이 있다. 이와 같은 이유로, 지진하중에 대한 내진성능이 다른 골조 시스템에 비해 크게 효과적이지 않음에도 불구하고 중간 또는 낮은 수준의 지진을 받는 소규모 골조 구조물에 널리 사용되어 왔다. 횡방향 지진 하에서 압축 거동에 대해 취약한 가새부재를 갖는 보통중심가새골조의 내진성능을 향상시키기 위해, 통상적으로 점성감쇠기에 의한 내진보강이 도입되어 왔다. 하지만, 점성감쇠기 자체는 일반적으로 구조물을 원래 위치로 복원시킬 수 있는 강성을 갖지 않는다. 이는 구조물에 잔류 변위를 유발시킬 수도 있다. 이 논문에서는 휨강성을 갖는 상·하부 보가 비선형-탄성 스프링 역할을 하여 외부 변위 이력을 받는 스프링-감쇠기 시스템을 원래 위치로 복원시키는 자가복원형 점성감쇠기 시스템이 개발되었다. 단순화된 골조 구조물에 대한 수치해석은 개발된 자가복원형 점성감쇠기 시스템을 포함할 경우 지진이 가해지는 동안 에너지 소산을 통해 어떻게 골조 구조물의 향상된 내진성능을 가져오는지 보여준다.

비선형 히스테리시스 댐퍼를 갖는 진동계의 해석 (Non-linear Vibration of a System Incorporating a Hysteretic Damper)

  • 양성영;장서일;김상주
    • 소음진동
    • /
    • 제10권3호
    • /
    • pp.531-535
    • /
    • 2000
  • A three-parameter model of viscoelastic damper which has a non-linear spring as an element is incorporated into an oscillator. The behavior of the damper model shows non-linear hysteresis curves which is qualitatively similar to those of real viscoelastic materials. The motion is governed by get analytic solutions of the system. The frequency-response curves show that multiple solutions co-exist and that the jump phenomena can occur. In addition it is shown that separate solution branch exists and that it can merge with the primary response curve. Saddle-node bifurcation sets explain the occurences of such non-linear phenomena. A direct time intergration of the original equation of motion validifies the use of the harmonic balance method to this sort of problem.

  • PDF

비선형 히스테리시스 진동시스템의 분기해석 (Bifurcation Analysis of a Non-linear Hysteretic Oscillating System)

  • 송덕근;최진권;장서일
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2001년도 춘계학술대회논문집
    • /
    • pp.289-294
    • /
    • 2001
  • Three kinds of viscoelastic damper model, which has a non-linear spring as an element is studied analytically and numerically. The behavior of the damper model shows non-linear hysteresis curves which is qualitatively similar to those of real viscoelastic materials. The motion is governed by a non-linear constitutive equation and an additional equation of motion. Harmonic balance method is applied to get analytic solutions of the system. The frequency-response curves show that multiple solutions co-exist and that the jump phenomena can occur. In addition, it is shown that separate solution branch exists and that it can merge with the primary response curve. Saddle-node bifurcation sets explain the occurrences of such non-linear phenomena.

  • PDF

비선형 히스테리시스 진동시스템의 분기해석 (Bifurcation Analysis of a Non-linear Hysteretic Oscillating System)

  • 장서일;송덕근;최진권
    • 한국소음진동공학회논문집
    • /
    • 제12권1호
    • /
    • pp.57-64
    • /
    • 2002
  • Three kinds of viscoelastic damper model, which has a non-linear spring as an element is studied analytically and numerically The behavior of the damper model shows non-linear hysteresis curves which is qualitatively similar to those of real viscoelastic materials. The motion is governed by a non-linear constitutive equation and an additional equation of motion. Harmonic balance method is applied to get analytical solutions of the system. The frequency-response curves sallow that multiple solutions co-exist and that the jump phenomena can occur. In addition, it is shown that separate solution branch exists and that it can merge with the primary response curve. Saddle-node bifurcation sets explain the occurrences of such non-linear Phenomena.

비선형 점탄성 댐퍼를 포함한 진동시스템의 모델링 및 해석 (Modelling and Analysis of a Vibrating System Incorporating a Viscoelastic Damper)

  • 양성영;장서일;김상주
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2000년도 춘계학술대회논문집
    • /
    • pp.449-454
    • /
    • 2000
  • A three-parameter model of viscoelastic damper, which has a non-linear spring as an element is incorporated into an oscillator. The behavior of the damper model shows non-linear hysteresis curves which is qualitatively similar to those of real viscoelastic materials. The motion is governed by three-dimensional non-linear dynamical system of equations. The harmonic balance method is applied to get analytic solutions of the system. The frequency-response curves show that multiple solutions co-exist and that the jump phenomena can occur. In addition, it is shown that separate solution branch exists and that it can merge with the primary response curve. Saddle-node bifurcation sets explain the occurences of such non-linear phenomena. A direct time integration of the original equation of motion validifies the use of the harmonic balance method to this sort of problem.

  • PDF

건마찰 감쇠기가 부착된 외팔보의 강제진동 응답 해석 (An Analysis of Forced Vibration Response of a Cantilever Beam with a Dry Friction Damper)

  • 고영준;강병용;장호경;김예현
    • 한국음향학회지
    • /
    • 제15권2호
    • /
    • pp.33-39
    • /
    • 1996
  • 비선형 건마찰 감쇠를 가진 외팔보의 강제진동 응답을 건마찰 감쇠기와 가진력의 위치변화에 대하여 미끄러진 변위와 힘레벨을 수치해석하였다. 구성모드의 분석은 비선형 감쇠를 가진 계를 해석하기 위해 구속조건과 Lagrange 승수에 기초를 두고 분석하였다. 외팔보의 진동분석 결과 건마찰 감쇠기가 부착된 단순 지지된 보(beam)에서 보여진 응답특성과 유사한 특성이 나타났다.

  • PDF

ESTIMATION OF RIDE QUALITY OF A PASSENGER CAR WITH NONLINEAR SUSPENSION

  • Cho, S.J.;Choi, Y.S.
    • International Journal of Automotive Technology
    • /
    • 제8권1호
    • /
    • pp.103-109
    • /
    • 2007
  • The nonlinear characteristics of a suspension is directly related to the ride quality of a passenger car. In this study, the nonlinear characteristics of a spring and a damper of a passenger car is analyzed by dynamic experiments using the MTS single-axial testing machine. Also, a mathematical nonlinear dynamic model for the suspension is devised to estimate the ride quality using the K factor. And the effect on the variation of the parameters of the suspension is examined. The results showed that the dynamic viscosity of the oil in a damper was the parameter that most influeced the ride quality of a passenger car for the ride quality of a passenger car.