• 한국자동차공학회논문집
• /
• 제13권2호
• /
• pp.157-161
• /
• 2005

In the FY 2003, the number of registered vehicles in Korea reached 14 million, which is 7.7% increase from the previous year. The increase of number of vehicles has caused a lot of social problem with enormous costs. The social costs related to the vehicles includes environmental costs resulting from pollution and scraping of vehicles, those resulting from life-saving and repairing from car accidents and so on. There have been m any efforts to reduce the social costs in m any areas. As a part of the efforts, there are recent grow ing interests on the damageability & repairability in related industries. In this study, we investigated the cases of two different types of bum per stay. Futhermore, we analyzed their effects on damageability & repairability and reduction of repair cost. So we found that if the manufacturers design new cars with good damageability & repairability, then the total repair cost in crash will be reduced.

• 한국자동차공학회논문집
• /
• 제13권2호
• /
• pp.108-113
• /
• 2005

The damageability and repairability of similar platform type vehicles could be very concerned with design optimization. In all the vehicles crash tested, small size passenger vehicles were weakness in aspect of damageability and repairability. The most critical area appears to be repair cost considering that parts cost is the largest portion of total repair cost segments. Besides repair cost, attaching method of front sidemember and subframe are placed special importance for impact energy absorption and damageability and repairability. So in order to improve damageability and repairability of vehicle structure and body component of the monocoque type passenger vehicles, the end of front side member and front back beam should be designed with optimum level and to supply the end of front side member as a partial condition approx 300mm. The effectiveness of design concept on the 40% offset frontal impact characteristics of the passenger vehicle structure is investigated and summarized.

• 한국자동차공학회논문집
• /
• 제7권9호
• /
• pp.203-211
• /
• 1999

The research committee for automobile repairs (RCAR), an international body of insurance research centers, has adopted the typical low speed crash test based on an average damage level in crash accidents to estimate the damageability , repairability and safety. The characteristics of body acceleration and the probability of injury are investigated based on damaged components, accelerations of body and injured dummy to analyze damageability and the driver's safety under low speed crash environment. It is found from the experimental results that the probability of head and thorax injuries are very low comparing to the injury criteria of FMVSS No.208. Furthermore, it is suggested that the deployment of airbag may not be necessary at RCAR low speed frontal crash test.

• 한국자동차공학회논문집
• /
• 제11권5호
• /
• pp.134-139
• /
• 2003

The car crash accidents in low speed occurs most frequently. Damage on a conventional bumper after the car accident causes the bumper to get fixed most of time. This study shows how a gas tube bumper reduces a damageability and increase repairability after the car accidents. The 15 km/h 40% offset front and rear crash test recommended by RCAR (Research council for automobile repairs) standard was performed and evaluated damages on the gas tube bumper by the pendulum impact tester. In this study, the gas tube bumper reduces damageability and increases repairability after car crash accidents. In addition, car frame design to apply the gas tube bumper may consider to be changed.

• Earthquakes and Structures
• /
• 제3권5호
• /
• pp.695-717
• /
• 2012

Seismic resiliency of new buildings has improved over the years due to better seismic codes and design practices. However, there is still large number of vulnerable and seismically deficient buildings. It is not economically feasible to retrofit and upgrade all vulnerable buildings, thus there is a need for rapid screening tool. Many factors contribute to the damageability of buildings; this makes seismic evaluation a complex multi-criteria decision making problem. Many of these factors are noncommensurable and involve subjectivity in evaluation that highlights the use of fuzzy-based method. In this paper, a risk-based framework earlier proposed by Tesfamariam and Saatcioglu (2008a) is extended using Fuzzy-TOPSIS method and applied to develop an evaluation and ranking scheme for steel buildings. The ranking is based on damageability that can help decision makers interpret the results and take appropriate decision actions. Finally, the application of conceptual model is demonstrated through a case study of 1994 Northridge earthquake data on seismic damage of steel buildings.

• 한국자동차공학회논문집
• /
• 제11권5호
• /
• pp.127-133
• /
• 2003

For the purpose of evaluation the damage repairability of a Frame Type Passenger vehicle which experienced a Low Speed 40% Offset front and rear Crash Test. tests were made according to the RCAR testing procedures. Test results concluded ; (1) The deceleration at C.G(center of gravity) off 6.9∼11.39 was similar to that for the vehicle. The airbag system was found to affect neither the passenger's safety nor the savings of the repairing costs. (2) In order to improve the repairability of the Frame Type Passenger vehicle after collision should be a higher crash performance of the bumper on the RCAR standards.

• 대한기계학회논문집A
• /
• 제34권1호
• /
• pp.1-9
• /
• 2010

본 연구의 목적은 저속충돌에서 승용차량의 범퍼체결구조를 분석하기 위한 것이다. 차량의 손상성-수리성 향상 연구를 위해 범퍼체결구조가 서로 상이한 3개 차종에 대해 RCAR(세계자동차 수리기술위원회)의 저속충돌시험(전,후면 40% 오프셋 충돌시험) 기준을 적용하였다. 시험결과 충격흡수능력은 직사각형 단면형상을 가지고 그 부분이 범퍼레일에 삽입되는 크래시박스식의 범퍼스테이가 대부분의 차량에 적용되고 있는 다른 두 유형의 범퍼체결구조에 비해 우수하게 나타났다. 우수하게 설계된 직사각형 단면형상을 가지는 범퍼체결구조가 저속충돌사고 시 차량의 손상성-수리성을 향상시킴으로써 승객의 안전성도 강화시킬뿐만 아니라 수리비 절감에도 기여할 수 있다는 것이 본 연구에서 입증되었다.

• 한국자동차공학회논문집
• /
• 제11권2호
• /
• pp.182-189
• /
• 2003

We have found that the damage of the front part for a vehicle and that of the rear part for a vehicle are the majority of frequency experienced by the traffic accidents. In conventional bumper system was designed by safety standard regulation at low speed crash. For example there are 2.5 mile and 5 mile bumper. The conventional bumper system was the crash from max 5.5 mile to 3 mile low speed occurs most frequently and results in the highest rate of repairing cost in statistically. On this study, in order to check the damageability and repairability of gas tube bumper system RCAR 15 km/h 40 % offset frontal crash test was adopted in low speed and we have a gas tube bumper parts test and vehicle test with gas tube bumper, we can find gas tube bumper system definitely can improve the damageability and repairability of the vehicles and contribute to down the repairing cost.

• Structural Engineering and Mechanics
• /
• 제7권1호
• /
• pp.1-18
• /
• 1999

Seismic evaluation of a 32-story reinforced concrete framed tube building is performed by checking damageability, safety, and toughness limit states. The evaluation is based on Standard 2800 (Iranian seismic code) which recommends equivalent lateral static force, modal superposition, or time history dynamic analysis methods to be applied. A three dimensional linearly elastic model checked by ambient vibration test results is used for the evaluation. Accelerograms of three earthquakes as well as linearly elastic design response spectra are used for dynamic analysis. Damageability is checked by considering story drift ratios. Safety is evaluated by comparing demands and capacities at the story and element force levels. Finally, toughness is studied in terms of curvature ductility of members. The paper explains the methodology selected and various aspects in detail.

• Steel and Composite Structures
• /
• 제24권3호
• /
• pp.369-382
• /
• 2017

This study investigates the reliability of the performance levels of moment resisting steel frames subjected to lateral loads such as wind and earthquake. The reliability assessment has been performed with respect to three performance levels: serviceability, damageability, and ultimate limit states. A four-story moment resisting frame is used as a typical example. In the reliability assessment the uncertainties in the loadings and in the capacity of the frame have been considered. The wind and earthquake loads are assumed to have lognormal distribution, and the frame resistance is assumed to have a normal distribution. In order to obtain an appropriate limit state function a linear relation between the loading and the deflection is formed. For the reliability analysis an algorithm has been developed for determination of limit state functions and iterations of the first order reliability method (FORM) procedure. By the method presented herein the multivariable analysis of a complicated reliability problem is reduced to an S-R problem. The procedure for iterations has been tested by a known problem for the purpose of avoiding convergence problems. The reliability indices for many cases have been obtained and also the effects of the coefficient of variation of load and resistance have been investigated.