• Title/Summary/Keyword: Damage rates

Search Result 536, Processing Time 0.023 seconds

A Study on the Damage Evaluation of Polyethylene Pipe by Squeeze-off (스퀴즈오프에 따른 PE배관의 손상평가 연구)

  • Ho seong Seo;Hwa young Lee;Jae-hun Lee
    • Journal of the Korean Institute of Gas
    • /
    • v.27 no.2
    • /
    • pp.1-6
    • /
    • 2023
  • PE piping, which has advantages in terms of construction convenience and economy, is widely used for underground burial in the domestic urban gas field. These PE pipes use squeeze-off in many sites to block gas flow during maintenance and repair work. Squeeze-off refers to a method of compressing a PE pipe to block fluid flow, and damage may occur due to the nature of construction in which the pipe is deformed by physical force. In order to prevent damage to PE pipes due to squeeze-off, the main points to be reflected in the squeeze-off operation procedures such as proper compression range, use pressure, and diameter were derived through damage assessment and confidential test according to the compression rate. The compression experiment for PE pipe damage assessment was conducted while changing the compression rate (20%~40%), the pressure of use (2.8 kPa, 25 kPa, 70 kPa), and the pipe diameters (63 mm, 90 mm, 110 mm). As a result of damage assessment according to the compression rate, damage occurred in pipes with compression rates of 45%(110mm) and 73%(63mm), which are for analyzing the effect of excessive compression. In addition, the leakage test was conducted using Ar(argon) during the squeeze-off, and as a result of the experiment, leakage occurred under the conditions of 70kPa and 110mm of pipe. As a result of this study, it was confirmed that squeeze-off for airtightness should be carried out in pipes within a range not exceeding 25 kPa and 90 mm pipes, and the appropriate compression rate to prevent damage to PE pipes is 30%.

Bionomics, Host range & Analysis of Damage Aspects on the Black Pine Bast Scale, Matsucocus thunbergianae (Homoptera : Cocoidea), in the Coastal Area of Southwest Korea (한국 남서해안지대의 해송림에 만연된 솔껍질깍지벌레(Matsucocus thunbergianae)의 생태, 기주범위 및 피해해석에 관한 연구(I))

  • 김규진;오광인
    • Korean journal of applied entomology
    • /
    • v.31 no.4
    • /
    • pp.386-395
    • /
    • 1992
  • The black pine bast scale, Matsucoccus thunbergianae, causes severe damage to the black pines of southern coastal areas. It has one generation a year, coming out of the pine bark to mate a and lay eggs from early March to early May. Especially, its peak time is from late March to m mid-April. The host plants were found to be 7 species, Pinus thunbergii, P. strobus, P. taeda, P. b banksiana, P. massoniana, P. taiwannesis, and P. densiflora. The percentage of damaged black p pine by the age were 0.8% for I-year old ones, 3.7% for 4-6 years, 5.2% for 7-9 years, 9.3% f for 10-12 years, 8.1% for 13-15 years, 7.8% for 16-18 years, 6.7% for 19-21 years, 3.3% for 2 22-24 years, 1.9% for 25-27 years, and 1.1 % for 28 years. The highest rate of damage happened to 7 -20 years old trees, whereas the highest rate of damage upon branches happened to 6 6-7 years old ones. Finally, as far as the trunk is concerned, the damages proceeded from the m middle parts of the trunk, whose branches were alive up to the top. The rates of damage s spread in pure forest/mixed forest area were turned out to be 81.3/52.5% in Koheung, 80.3/ 5 58.1 % in Haenam, and 76.3/48.5% in Muan. That is, the damage rate was higher in the pure f forest areas than the mixed forest ones. The higher the density of trees beyond 20 trees per m 100$m^2$, the higher the damage rate was.

  • PDF

Migratory and Subsequent Generation-related Damage Patterns of Spodoptera frugiperda in Corn Plants in Jeju, South Korea (제주 옥수수에서 열대거세미나방 비래 세대 및 후세대의 피해양상 특성)

  • Heo, Jinwoo;Kim, Subin;Kim, Dong-soon
    • Korean journal of applied entomology
    • /
    • v.60 no.2
    • /
    • pp.221-228
    • /
    • 2021
  • The fall armyworm (FAW), Spodoptera frugiperda (Smith), is a notorious invasive migratory pest native to the tropics that has recently invaded South Korea with subsequent damage to cornfields. This study was conducted to evaluate the damage patterns on corn plants caused by the migratory and subsequent generations of FAW. The early migrant generation-related infestation rates reached an average of 13.2%, ranging from a minimum of 4.3% ('Allog-i') to a maximum of 33.0% ('Chodang'), depending on the corn cultivar. The proportion of FAW larvae-infested corn plants, in which the FAW survived until the pupal stage was 19.3%. The subsequent FAW generation caused considerable damage to the ears, resulting in 60% of ears with damaged kernels. This damage was markedly different from the nearly negligible damage caused by the migratory generation. The FAW larval dispersion was the most dynamic during the second instar stage and occurred along the same cornrow in line. In addition, we discuss the development of corn pant damage patterns caused by FAW. In summary, the results of the present study would provide useful basic information for the damage analysis of this pest for future studies.

Effects of Ginseng Protein on Relative Survival and Chromosome Aberration of UV Irradiated Cells

  • Kim, Choon-Mi;Park, So-Young
    • Archives of Pharmacal Research
    • /
    • v.11 no.3
    • /
    • pp.225-229
    • /
    • 1988
  • A ginseng protein fraction which has been reported to have radiation protective effect was purified from Korean ginseng and its effects on relative survival and chromosome aberration were studied in UV irradiated CHO-K1 cells. When the protein fraction $(100\;{\mu}g/ml)$ was added to the cells before UV irradiation at 4\;J/$m^2$,, the survival rates were increased to 53.8% from 40.6% in control. Addition of the protein $(100\;{\mu}g/ml)$ after UV irradiation at 4 and $8\;J/m^2$ raised the rates to 85.4 and 24.0% from 79.2 and 11.5% in control, respectively. When the ginseng protein $(800\;{\mu}g/ml)$ was added to the cells exposed to UV light at 10, 20, $30\;J/m^2$, the frequencies of chromosome aberration (CA) were reduced significantly to almost same level regardless of the UV dose increment and there was no significant difference between pre- and post-treatment. When the concentration of ginseng protein was increased from 200 to $800\;{\mu}g/ml$, at UV dose of 10, 20, $30\;J/m^2$ each, the CA frequencies were decreased consistently as the dose of ginseng protein increased, at all UV doses tested. Similar effects were observed in both cases of pre- and post-treatment. The data suggest that the protein may reduce cell damage caused by UV light, especially damage to DNA molecule, or play a role in repair processes of damaged DNA, to increase cell survival and reduce chromosome aberrations.

  • PDF

Study on Optimal Working Conditions for Picking Head of Self-Propelled Pepper Harvester by Factorial Test

  • Kang, Kyung-Sik;Park, Hoon-Sang;Park, Seung-Je;Kang, Young-Sun;Kim, Dae-Cheol
    • Journal of Biosystems Engineering
    • /
    • v.41 no.1
    • /
    • pp.12-20
    • /
    • 2016
  • Purpose: Pepper prices have risen continuously because of a decrease in cultivation area; therefore, mechanical harvesting systems for peppers should be developed to reduce cost, time, and labor during harvest. In this study, a screw type picking head for a self-propelled pepper harvester was developed, and the optimal working conditions were evaluated considering helix types, winding directions of helix, and rotational speeds of the helix. Methods: The screw type was selected for the picking head after analyzing previous studies, and the device consisted of helices and a feed chain mechanism for conveying pepper branches. A double helix and a triple helix were manufactured, and rotational speeds of 200, 300, and 400 rpm were tested. The device was controlled by a variable speed (VS) motor and an inverter. Both the forward and reverse directions were tested for the winding and rotating directions of the helix. An experiment crop (cultivar: Longgreenmat) was cultivated in a plastic greenhouse. The test results were analyzed using the SAS program with ANOVA to examine the relationship between each factor and the performance of the picking head. Results: The results of the double and triple helix tests in the reverse direction showed gross harvest efficiency levels of 60-95%, mechanical damage rates of 8-20%, and net marketable portion rates of 50-80%. The dividing ratio was highest at a rotational speed of 400 rpm. Gross harvest efficiency was influenced by the types of helix and rotational speed. Net marketable portion was influenced by rotational speed but not influenced by the type of helix. Mechanical damage was not influenced by the type of helix or rotational speed. Conclusions: Best gross harvest efficiency was obtained at a rotational speed of 400 rpm; however, operating the device at that speed resulted in vibration, which should be reduced.

A Study on Flooding Prevention Scheme due to Sea Level Rise at Young-do Coast in Busan (부산 영도 해안의 해수면 상승에 따른 침수대책 연구)

  • Hong, Sung-Ki;Kang, Yong-Hoon;Lee, Han-Seok
    • Journal of Navigation and Port Research
    • /
    • v.37 no.4
    • /
    • pp.409-418
    • /
    • 2013
  • On the assumption of the rise of sea level, the inundation vulnerabilities on coastal areas of Korea are evaluated in different ways. The propose of this study is to find out the influences of sea level rise caused by global warming at Young-do coastal area, and to suggest the prevention schemes against the flooding damage caused by the sea level rise. The potential rates of sea level rise are assumed and with these rates the inundation vulnerabilities are simulated using CAD program. With the virtual maps, as the results of the previous CAD simulation, this study attempts to suggest the flood prevention schemes for each sector of damage-expected coastal area.

Permanent Ground Deformation Effects on Underground Wastewater Pipeline Performance (영구지반변형이 매설된 하수도관로 성능에 미치는 영향)

  • Jeon, Sang-Soo
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.17 no.1
    • /
    • pp.284-289
    • /
    • 2016
  • In recent years, the earthquake sequence in Christchurch, New Zealand (NZ) was unprecedented in terms of repeated earthquake shocks with substantial levels of ground motion affecting modern infrastructure, and in particular, broad and precise reports for liquefaction-induced permanent ground deformation (PGD) and repairs of wastewater (WW) pipelines were collected. In this study, a geographical information system (GIS) and linear regression analysis were performed using data for the length and repair points of earthenware (EW) and concrete (CONC) wastewater pipelines acquired after the MW 6.2 February 22, 2011 earthquake. The repair rates (repairs/km) for the EW and CONC wastewater pipelines were evaluated inside the areas of PGD, and both angular distortion of ground and lateral ground strain were calculated from the high resolution LiDAR data acquired before and after the seismic event. The research results showed that both pipelines have similar trends of damage but the CONC wastewater pipeline with higher stiffness showed less damage. The results of linear regression analyses can be used to predict the repair rates for EW and CONC wastewater pipelines inside the areas of PGD induced by future earthquakes.

A Lower T1 Slope as a Predictor of Subsidence in Anterior Cervical Discectomy and Fusion with Stand-Alone Cages

  • Lee, Su Hun;Lee, Jun Seok;Sung, Soon Ki;Son, Dong Wuk;Lee, Sang Weon;Song, Geun Sung
    • Journal of Korean Neurosurgical Society
    • /
    • v.60 no.5
    • /
    • pp.567-576
    • /
    • 2017
  • Objective : Preoperative parameters including the T1 slope (T1S) and C2-C7 sagittal vertical axis (SVA) have been recognized as predictors of kyphosis after laminoplasty, which is accompanied by posterior neck muscle damage. The importance of preoperative parameters has been under-estimated in anterior cervical discectomy and fusion (ACDF) because there is no posterior neck muscle damage. We aimed to determine whether postoperative subsidence and pseudarthrosis could be predicted according to specific parameters on preoperative plain radiographs. Methods : We retrospectively analyzed 41 consecutive patients (male : female, 22 : 19; mean age, $51.15{\pm}9.25years$) who underwent ACDF with a stand-alone polyether-ether-ketone (PEEK) cage (>1 year follow-up). Parameters including SVA, T1S, segmental angle and range of motion (ROM), C2-C7 cervical angle and ROM, and segmental inter-spinous distance were measured on preoperative plain radiographs. Risk factors of subsidence and pseudarthrosis were determined using multivariate logistic regression. Results : Fifty-five segments (27 single-segment and 14 two-segment fusions) were included. The subsidence and pseudarthrosis rates based on the number of segments were 36.4% and 29.1%, respectively. Demographic data and fusion level were unrelated to subsidence. A greater T1S was associated with a lower risk of subsidence (p=0.017, odds ratio=0.206). A cutoff value of T1S<$28^{\circ}$ significantly predicted subsidence (sensitivity : 70%, specificity : 68.6%). There were no preoperative predictors of pseudarthrosis except old age. Conclusion : A lower T1S (T1S<$28^{\circ}$) could be a risk factor of subsidence following ACDF. Surgeons need to be aware of this risk factor and should consider various supportive procedures to reduce the subsidence rates for such cases.

Damage of broad mite, Polyphagotarsonemus latus (Banks), on pepper growth and yield and its chemical control (차먼지응애(Polyphagotarsonemus latus)가 고추의 생육과 수확에 미치는 피해 및 화학적 방제)

  • 조명래;전흥영;라승영;김동순;임명순
    • Korean journal of applied entomology
    • /
    • v.35 no.4
    • /
    • pp.326-331
    • /
    • 1996
  • To evaluate the damage of broad mite, Polyphagotarsonemus latus (Banks), on pepper growth and yield, broad mite females were infested on pepper seedlings. In plots infested with 1, 2, and 5 females/plant, pepper growth was significantly reduced after 10 weeks with growth rates of 264, 256, and 177%, respectively, while that of control plot was 337%. Total pepper yields in the plots infested with 1, 2, and 5 females/plant were 443.9, 230. 5, and 103.4 kg/lOa, respectively, which were significantly lower than 1, 197.5 kg/lOa of the control plot. Dicofol EC, Chinomethionat WP, Pyridaben WP, and Pyraclofos WP were effective in controlling the broad mite on pepper showing over 90% mortality by 17 days after application. Although the updated reports on the nationwide occurrence of the broad mite damage on pepper showed that most damages were occurring in greenhouses between October and March, damages were observed in late May in certain locality.

  • PDF

Recovery of Etching Damage of the etched PZT Thin Films With $O_{2}$ Re-Annealing. ($O_{2}$ re-annealing에 의한 식각된 PZT 박막의 식각 damage 개선)

  • Kang, Myoung-Gu;Kim, Kyoung-Tae;Kim, Chang-Il;Chang, Eui-Goo;Lee, Byeong-Ki
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2001.05b
    • /
    • pp.8-11
    • /
    • 2001
  • In this study. the recovery of plasma induced damage in the etched PZT thin film with $O_2$ re-annealing have been investigated. The PZT thin films were etched as a function of $Cl_2/Ar$ and additive $CF_4$ into $Cl_{2}(80%)/Ar(20)%$. The etch rates of PZT thin films were $1600\dot{A}/min$ at $Cl_{2}(80%)/Ar(20)%$ gas mixing ratio and $1970\dot{A}/min$ at 30 % additive $CF_4$ into $Cl_{2}(80%)/Ar(20)%$. The etched profile of PZT films was obtained above 70 by SEM. In order to recovery properties of PZT thin films after etching, the etched PZT thin films were re-annealed at various temperatures in $O_2$ atmosphere. From the hysteresis curves, ferroelectrical properties are improved by $O_2$ re-annealing process. The improvement of ferroelectric behavior at annealed sample is consistent with the increase of the (100) and (200) PZT phase revealed by x-ray diffraction (XRD). From XPS analysis, intensity of Pb-O, Zr-O and Ti-O peak are increased and the chemical residue peak is reduced by $O_2$ re-annealing. The ferroelectric behavior consistent with the dielectric nature of TixOy is recovered by $O_2$ recombination during rapid thermal annealing process. From AFM images, it shows that the surface roughness of re-annealed sample after etching is improved.

  • PDF