• The Journal of Engineering Geology
• /
• v.20 no.1
• /
• pp.89-100
• /
• 2010

Although various methods for determination of damage threshold in rock have been suggested, clear damage thresholds were determined by some methods, but different thresholds were measured by other methods. We determined the damage thresholds in Hangdeung granite using all the methods suggested, and investigated the best methods, applicability and errors of each method. The crack initiation threshold and the crack damage threshold which are important in investigation of characteristics of crack development and failure were verified by field strength ratio method and long-term constant load test. The crack closure stress and the crack initiation stress were 57.5 MPa and 77.6 MPa, and the most exact values were yielded by crack volumetric strain. The secondary crack initiation stress was 90.6 MPa and AE event count and AE event count rate were the effective methods. The volumetric stiffness, AE event count and AE event count rate were the most effective methods for determination of crack coalescence threshold and crack coalescence stress was 110.3 MPa. The crack damage stress was 127.5 MPa and was measured correctly by volumetric stiffness and AE event count rate. The ratio between crack initiation stress and uniaxial compressive strength was 0.47 which was very similar with the FSR value of 0.46. The ratio between crack damage stress and uniaxial compressive strength was almost the same as the ratio between long-term strength and uniaxial compressive strength, indicating that the crack initiation stress and the crack damage stress measured were correct.

• Journal of Embryo Transfer
• /
• v.23 no.1
• /
• pp.19-24
• /
• 2008

The purpose of this study was to compare the efficiency of slow freezing with that of vitrification method for the cryopreservation of human embryos. Human embryos were derived from in vitro fertilization (IVF) or intracytoplasmic sperm injection (ICSI) and the mixed solution of propanedial (1.5, 1.0, 0.5M PROH) and sucrose (0.1M), ethylene glycol (7.5, 15%), dimethyl sulfoxide (7.5, 15% DMSO), sucrose (0.5, 1.0M) and SPS (Serum Protein Substitute) was used for a cryoprotectant for slow freezing and vitrification solution, respectively. Rates of recovery after thawing, morphological normality, post-thaw viability, arrest, morphological abnormality and preimplantation development were compared between two protocols. After freezing-thawing, recovery and survial rate of slow freezing was (88.6% and 73.4%), whereas vitrification was (99.2% and 96.2%) (p<0.05). The arrest rate of slow freezing was significantly lower compared with those of vitrification(8.7% vs 29.9%) (p<0.05). Preimplantation development to the 2-cell (83.8% vs 67.7%), 4-cell (69.0% vs 47.2%) and 8-cell (62.4% vs 37.8%) stages 24, 48 and 72 h after thawing, respectively, were higher in the slow freezing than the vitrification. After slow freezing and vitrification of human embryo at 2-8cell stage, the rate of recovery rate, survival rate and partial damage rate were 92.0% vs 100%, 80.4% vs 96.2% and 52.2% vs 19.0%, respectively. And partial damage rate was significantly lower than those of slow freezing method (p<0.05). These results demonstrate that a slow freezing using PROH is more efficient than a vitrification for cryopreserving the human zygotes, although the vitrification yielded better recovery, survival and partial damage of frozen-thawed 2-8 cell stage embryos than slow freezing method.

• Corrosion Science and Technology
• /
• v.18 no.6
• /
• pp.292-299
• /
• 2019

The hull material of a high-speed ship may cause erosion damage from fluid impact. When physical erosion and electrochemical corrosion combine, erosion corrosion damage occurs. The aluminum ship is vulnerable to erosion corrosion because it can be operated at high speed. Thus, in this study, Al5052-O and Al6061-T6 aluminum alloys for the marine environment were selected as experimental materials. The erosion corrosion resistance of Al5052-O and Al6061-T6 aluminum alloys in seawater was investigated by an erosion test and potentiodynamic polarization test at the various flow rate (0 m/s, 5 m/s, 10 m/s, 15 m/s, 20 m/s). Erosion corrosion characteristics were evaluated by surface analysis, 3D analysis, SEM analysis, and the Tafel extrapolation method. The results of surface damage analysis after the erosion test showed that Al6061-T6 presented better erosion resistance than Al5052-O. The results of the potentiodynamic polarization test at the various flow rate, corrosion current density by Tafel extrapolation presented lower values of Al6061-T6 than Al5052-O. Al5052-O showed more surface damage than Al6061-T6 at all flow rates. Consequently, Al6061-T6 presented better erosion corrosion resistance than Al5052-O. The results of this study are valuable data for selecting hull material for an aluminum alloy vessel.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.2
• /
• pp.68-75
• /
• 2015

This study established key factors causing deck slab deterioration based on GPR database of 747 highway bridges, and predicted deck slab damage rates with respect to bridge service life. To minimize the influence of bridge service life on deck slab deterioration, the deck slab damage rate database was corrected based on a linear regression model of bridge service life vs. deck slab damage rate. The corrected deck slab damage rates were analyzed to determine correlation considering the number of snowy days, the amount of snowfalls, the number of freeze-thaw days, average winter temperature, altitude, the amount of deicing chemicals and equivalent traffic volume, and then both the number of freeze-thaw days and the amount of deicing chemicals were determined to be key factors causing deck slab deterioration. The complex deterioration considering both key factors was represented deck slab damage rate charts, and the average deck slab life was derived. The results of this study will be used as a guideline for highway bridge maintenance to identify the progress of deck slab deterioration for a given bridge and predict the time required deck slab rehabilitation.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.16 no.2
• /
• pp.245-256
• /
• 2002

This studt was investigated to prove the effect of SPBST on the hypertension, the thrombosis and the brain damage. The results were as follows; 1. SPBST affected the htpertension as adepressant, but insignificant. 2. SPBST decreased significantly dopamine, aldosterone but ineffective on the epinephrine, norepinephrine and renin activity. 3. SPBST increased the NO product but insignificant. 4. SPBST had a death suppression effect by 50% in pulmonary thrombosis inducement experiment and activated slightly on the fibrinolytic activity. 5. SPBST suppressed significantly platelet diminution and prolonged insignificantly PT and APTT. 6. On the measure of the blood flow rate induced by the thrombus, in vivo SPBST accelerated the blood flow rate, in vitro insignificant. 7. SPBST had no toxicity on the PC12 cell and B103 cell induced by amyloid β protein (-35) and a protective effect, in proportion to the density. 8. SPBST decreased significantly coma duration time in a Infatal dose of KCN and showed 50% of survival rate in a fatal dose. 9. SPBST decreased significantly ischemic area and edema incited by the MCA blood flow block. These results indicate that SPBST can be used in hypertension, the thrombosis, the brain damage, the ischemic cerebral infarction and the acute stage of the brain damage. Further study will be needed about the functional mechanism and etc.

• Journal of Biosystems Engineering
• /
• v.21 no.1
• /
• pp.34-43
• /
• 1996

The present pesticide application technology widely used with a power sprayer in Korea is assessed as the problem awaiting solution in the point of view of its ineffectiveness, inefficiency, and environmental contamination. As one approach to get rid of these problems, the boom spraying with ultra-low volume and precision application technology has been recommended. The study was undertaken to investigate plants damages incurred by the self-propelled boom-sprayer vehicle, to develop the design criteria of vehicle wheel, and to compare plant damages caused by the front wheel steering vehicle, the 4-wheel drive vehicle and the articulated vehicle, by the computer simulation. The experiment showed that the amount of damaged plants incurred by the self-propelled boom sprayer were about 0.29% in average in the field size of 100m$\times$50m(0.5ha), about 60~80% of which recovering while growing. The recommandable wheel size was analyzed to be 70~100cm in diameter, 8~15cm in width from the vehicle-plant-soil relationship. The simulation on damaged plants anticipated to be incurred by various steering vehicles showed that the smaller the turning radius, the lesser the damaged plants within its range of 3~5m. Average plant damage rate by the front wheel steering vehicle, the 4-wheel drive vehicle and articulated vehicle was relatively assessed to be 2 : 1.8 : 1.

• Journal of Digital Convergence
• /
• v.22 no.1
• /
• pp.23-32
• /
• 2024

This study selected in-depth discharge damage survey data and analyzed 92,364 patients whose main diagnosis was S00-T98 (damage, addiction, and specific other results due to external factors) based on the Korean Standard Classification of Diseases and Deaths (KCD-7th) among patients discharged from the hospital after inpatient treatment from January 2016 to December 2018. As a result of analyzing the general characteristics of injured and traumatic patients, the incidence rate of men was higher in gender, and the incidence rate of women increased as the year increased. As a result of analyzing the characteristics of injury and trauma patients other than injury, the injury intention had a high rate of unintentional damage, the damage place was the highest on the road/road, and it showed a decreasing trend as the year increased, and it showed an increasing trend in the residential area. It can be used as basic data for the establishment of a related system to prevent damage as a result of subsang.

• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.3
• /
• pp.328-336
• /
• 2002

decrease in efficiency due to cavity fluid fluctuation. The purpose of this study is to examine erosion aspect on the SS400 specimen by cavitation and the effect of impact pressure generated from the demolition of the cavity of ultrasonic vibrator horn in the marine sludge oil environment. The erosion damage of specimen was investigated mainly on weight loss, weight loss rate and maximum erosion rate with variation of the vibration amplitude of $50{\mu}m, 24{\mu}m$ as well as the change of space between transducer horn and specimen. The experimental results showed that as the space between ultrasonic vibrator horn and specimen disk increased, the weight loss and weight loss rate decreased and the values were larger in SFO than in SLO. These findings would help interpret the aspect of cavitation erosion damage in metallic materials of different operating environment and material characteristics.

• Journal of the Korea Safety Management & Science
• /
• v.24 no.2
• /
• pp.143-154
• /
• 2022

Korea has the highest suicide rate in the world, and firefighters have the highest suicide rate among the professional population. As a result of the study, post-traumatic stress disorder education is essential in all occupations. Post-traumatic stress disorder is the most common disease and the biggest obstacle for firefighters in Korea. Firefighters who have suffered physical and mental damage in many types of disaster sites due to their extreme occupations are rapidly increasing the suicide rate in recent years. In order to maximize the effect of job training, education on post-traumatic stress disorder from new employees to leadership training is urgently needed.

• Korean Journal of Environmental Biology
• /
• v.23 no.4
• /
• pp.390-397
• /
• 2005

The inhibition of cell recovery might be proceeded via either the damage of the mechanism of the recovery itself or via the formation of irreversible damage which could not be repaired at all. Both these processes may take place at the same time. Any of these possibilities would result in a decrease in both the rate and extent of cell recovery. To distinguish them, a quantitative approach describing the process of recovery as a decrease in the effective radiation dose was applied to experimental data on the recovery from potentially lethal damage in Chinese hamster cells exposed to X-rays alone or combined with various chemicals (pyruvate, novobiocin, lactate, nalidixic acid, 3-aminobenzamide). For these particular cases, it is concluded that the recovery process itself is not damaged and the inhibition of the recovery is entirely due to the enhanced yield of the irreversibly damaged cells.