• 한국지반공학회논문집
• /
• 제15권5호
• /
• pp.81-98
• /
• 1999

도심지 터널 건설에 있어서 중요한 고려 사항중 하나가 지상 건물에 대한 터널 굴착의 영향을 평가하는 문제이다. 일반적으로 터널 굴착에 의한 지표침하로 인접구조물이 영향을 받기도 하지만 기존 인접구조물이 터널 굴착에 따른 지표침하에 영향을 미치기도 한다. 이러한 터널 굴착에 의한 기존 인접구조물의 침하억제 효과와 구조물 손상 평가인자의 감소효과를 규명하기 위해서 3차원 탄소성 유한요소해석을 수행하였다. 또한, 본 연구에서는 터널 굴착에 기인한 지반침하가 인접구조물에 미치는 영향과 인접구조물이 지표침하에 미치는 영향을 규명하기 위해서 총 162개의 2차원 탄소성 유한요소 모델을 설정하고, 매개변수 변환연구를 수행하였다. 본 연구에서는 구조물의 폭과 구조물의 축강성 및 휨강성, 구조물의 위치, 터널 심도 등을 고려하였다. 그리고, 구조물과 지반침하의 상호작용을 표현하기 위해서 구조물의 손상평가 인자인 뒤틈각(angular distortion), 처짐비(deflection ratio), 건물의 최대침하량, 부등침하량 및 수평변형률 등의 변화를 관찰하였다. 한편, 지반의 강성과 구조물의 축, 휨강성을 대표할 수 있는 상대 강성비를 도입함으로써 터널 설계자가 활용할 수 있는 도표를 제시하였고, 구조물을 고려하지 않은 상태에서의 greenfield 지표침하 트라프를 수정할 수 있는 보정계수(modification factor) 개념을 도입하였다. 본 연구에서는 구조물과 지표침하와의 상호 간섭효과에 의한 지표침하의 억제와 인접구조물 손상평가 인자들의 감소효과를 고려할 수 있도록 하기 위해서 설계 단계에서 보정계수를 활용한 인접구조물의 합리적인 손상평가방법을 제안하였다.

• 한국해안·해양공학회논문집
• /
• 제31권3호
• /
• pp.158-169
• /
• 2019

추계학적 확률과정의 하나인 감마 확률과정을 이용하여 구조물의 잔류유효수명을 확률론적으로 예측할 수 있는 수학적 모형을 수립하였다. 수립된 모형은 과거부터 현재 시점까지 관측된 피해자료와 관련된 표본의 불확실성과 장래 시간 진행에 따른 누적피해의 불확실성을 올바로 고려할 수 있다. 또한 최소자승법과 모멘트법을 함께 사용하여 경사제의 재령, 운용환경 그리고 피해이력을 고려할 수 있는 모수 추정법을 제시하였다. 먼저 현재 재령의 단일 피해 자료를 갖는 임의의 조건에서 모수에 대한 민감도 분석을 수행하여, 잔류유효수명과 관련된 여러가지 거동 특성들을 분석하였다. 또한 잔류유효수명 예측모형을 경사제에 적용하였다. 경사제 피복재의 피해 이력에 대한 실험자료를 이용하여 감마 확률과정의 모수를 추정하였는데 실험자료와 매우 잘 일치하였다. 해석 결과에 의하면 현재 시점으로부터 상당히 오랜 시간이 경과하면 파괴한계를 초과할 확률이 일정한 값으로 수렴해야 하는 제약 조건을 잘 만족하였다. 한편 기대 잔류유효수명은 피해 이력의 거동 특성에 따라 각기 다르게 산정되었다. 특히 피해의 변동계수가 크면 추계학적으로 산정된 기대 잔류유효수명은 결정론적 회기모형의 해석 결과와 큰 차이를 보인다. 이는 해석과정에 포함된 불확실성의 영향으로 판단된다. 변동계수가 크면 파괴한계에 도달하는 시간의 분포가 넓게 퍼지기 때문이다. 따라서 본 연구에서 수립된 추계학적 잔류유효수명 예측모형은 현재 재령에서 경사제의 피해에 대한 확률적 평가를 수행할 수 있을 뿐만 아니라 장래 시간의 진행에 따른 누적피해의 불확실성을 올바로 고려할 수 있다.

• Smart Structures and Systems
• /
• 제32권1호
• /
• pp.9-21
• /
• 2023

The parameters of civil engineering structures have time-variant characteristics during their service. When extremely large external excitations, such as earthquake excitation to buildings or overweight vehicles to bridges, apply to structures, sudden or gradual damage may be caused. It is crucially necessary to detect the occurrence time and severity of the damage. The unscented Kalman filter (UKF), as one efficient estimator, is usually used to conduct the recursive identification of parameters. However, the conventional UKF algorithm has a weak tracking ability for time-variant structural parameters. To improve the identification ability of time-variant parameters, an adaptive UKF with forgetting factor (AUKF-FF) algorithm, in which the state covariance, innovation covariance and cross covariance are updated simultaneously with the help of the forgetting factor, is proposed. To verify the effectiveness of the method, this paper conducted two case studies as follows: the identification of time-variant parameters of a simply supported bridge when the vehicle passing, and the model updating of a six-story concrete frame structure with field test during the Yangbi earthquake excitation in Yunnan Province, China. The comparison results of the numerical studies show that the proposed method is superior to the conventional UKF algorithm for the time-variant parameter identification in convergence speed, accuracy and adaptability to the sampling frequency. The field test studies demonstrate that the proposed method can provide suggestions for solving practical problems.

• Smart Structures and Systems
• /
• 제9권3호
• /
• pp.253-271
• /
• 2012

Finite element (FE) model updating is a useful tool for global damage detection technique, which identifies the damage of the structure using measured vibration data. This paper presents the application of a finite element model updating method to detect the damage of a small-scale reinforced concrete building structure using measured acceleration data from shaking table tests. An iterative FE model updating strategy using the least-squares solution based on sensitivity of frequency response functions and natural frequencies was provided. In addition, a side constraint to mitigate numerical difficulties associated with ill-conditioning was described. The test structure was subjected to six El Centro 1942 ground motion histories with different Peak Ground Accelerations (PGA) ranging from 0.06 g to 0.5 g, and analytical models corresponding to each stage of the shaking were obtained using the model updating method. Flexural stiffness values of the structural members were chosen as the updating parameters. In model updating at each stage of shaking, the initial values of the parameter were set to those obtained from the previous stage. Severity of damage at each stage of shaking was determined from the change of the updated stiffness values. Results indicated that larger reductions in stiffness values occurred at the slab members than at the wall members, and this was consistent with the observed damage pattern of the test structure.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권2호
• /
• pp.236-244
• /
• 2014

Although a safety assessment of damaged ships, which considers environmental conditions such as waves and wind, is important in both the design and operation phases of ships, in Korea, rules or guidelines to conduct such assessments are not yet developed. However, NATO and European maritime societies have developed guidelines for a safety assessment. Therefore, it is required to develop rules or guidelines for safety assessments such as the Naval Ship Code (NSC) of NATO. Before the safety assessment of a damaged ship can be performed, the available damage scenarios must be developed and the safety assessment criteria must be established. In this paper, the parameters related to damage by accidents are identified and categorized when developing damage scenarios. The need for damage safety assessment criteria is discussed, and an example is presented. In addition, a concept and specifications for the DB-based supporting system, which is used in the operation phases, are proposed.

• Smart Structures and Systems
• /
• 제15권2호
• /
• pp.315-334
• /
• 2015

A main goal of this study is to propose a damage detection technique to detect and localize damages of a top-tensioned riser. In this paper, the top-tensioned finite element (FE) model is considered as an analytical model of the riser, and a vibration-based damage detection method is proposed. The present method consists of a FE model updating and damage index method. In order to accomplish the goal of this study, first, a sensitivity-based FE model updating method using natural frequencies and zero frequencies is introduced. Second, natural frequencies and zero frequencies of the axial mode on the top-tensioned riser are estimated by eigenvalue analysis. Finally, the locations and severities of the damages are estimated from the damage index method. Three numerical examples are considered to verify the performance of the proposed method.

• Structural Monitoring and Maintenance
• /
• 제7권3호
• /
• pp.261-281
• /
• 2020

Civil structures may experience progressive deterioration and damage under environmental and operational conditions over their service life. Finite element (FE) model updating method is one of the most important approaches for damage identification in structures due to its capabilities in structural health monitoring. Although various damage detection approaches have been investigated on structures, there are limited studies on large-sized space structures. Thus, this paper aims to investigate the applicability and efficiency of sensitivity-based FE model updating framework for damage identification in large space structures from a distinct point of view. This framework facilitates modeling and model updating in large and geometric complicated space structures. Considering sensitivity-based FE model updating and vibration measurements, the discrepancy between acceleration response data in real damaged structure and hypothetical damaged structure have been minimized through adjusting the updating parameters. The feasibility and efficiency of the above-mentioned approach for damage identification has finally been demonstrated with two numerical examples: a flat double layer grid and a double layer diamatic dome. According to the results, this method can detect, localize, and quantify damages in large-scaled space structures very accurately which is robust to noisy data. Also, requiring a remarkably small number of iterations to converge, typically less than four, demonstrates the computational efficiency of this method.

• Smart Structures and Systems
• /
• 제22권3호
• /
• pp.277-290
• /
• 2018

In this paper, wavelet finite element model (WFEM) updating technique is employed to detect sub-element damage in thin plate structures progressively. The procedure of WFEM-based detection method, which can detect sub-element damage gradually, is established. This method involves the optimization of an objective function that combines frequencies and modal assurance criteria (MAC). During the damage detection process, the scales of wavelet elements in the concerned regions are adaptively enhanced or reduced to remain compatible with the gradually identified damage scenarios, while the modal properties from the tests remains the same, i.e., no measurement point replacement or addition are needed. Numerical and experimental examples were conducted to examine the effectiveness of the proposed method. A scanning Doppler laser vibrometer system was employed to measure the plate mode shapes in the experimental study. The results indicate that the proposed method can detect structural damage with satisfactory accuracy by using minimal degrees-of-freedoms (DOFs) in the model and minimal updating parameters in optimization.

• 한국강구조학회 논문집
• /
• 제10권2호통권35호
• /
• pp.279-290
• /
• 1998

소수의 진동특성치가 실측된 삼차원 트러스 교량을 대상으로 기존의 손상추정법이 실험되었다. 첫 번째 단계로 진동모드 민감도 해석과 패턴인식기법을 사용하여 초기구조모델(baseline model)이 구성되었고, 다음 단계로 수개의 손상시나리오 수치 예를 초기구조물에 시뮬레이션하고 이를 손상지수와 패턴인식기법을 이용하여 손상위치를 예측하였다. 총 211개 요소에 11개의 부 구조계를 갖는 트러스 구조에 대하여 진동모드가 2개인 경우에 한하여 분석 검토한 결과 손상발견 알고리즘의 적합성이 입증되었다.

• Computational Structural Engineering : An International Journal
• /
• 제3권1호
• /
• pp.9-17
• /
• 2003

This paper aims at investigating the damage process of steel members leading to the failure under strong repeated loading, proposing the damage index using various factors related to the damage, and developing the analysis method for evaluating the damage state. Cantilever-type steel members were analyzed under uniaxial load and combined with a constant axial load, considering a horizontal displacement history. In analyzing the models, loading patterns and steel types (SS400, SM570, Posten80) were considered as main parameters. From the analysis results, the effects of parameter on the failures mode, the deformation capacity, the damage process are also discussed. Each failure process was compared as steel types. Consequently, the failure of steel members under strong repeated loading was determined by loading. Especially it was seen that the state of the failure is closely related to the local strain.