• Advances in materials Research
• /
• 제11권4호
• /
• pp.351-374
• /
• 2022

Softening function is the primary input for modeling the fracture of concrete when the cohesive crack approach is used. In this paper, based on the laboratory data on notched beams, an inverse algorithm is proposed that can accurately find the softening curve of the concrete. This algorithm uses non-linear finite element analysis and the damage-plasticity model. It is based on the kinematics of the beam at the late stages of loading. The softening curve, obtained from the corresponding algorithm, has been compared to other softening curves in the literature. It was observed that in determining the behavior of concrete, the usage of the presented curve made accurate results in predicting the peak loads and the load-deflection curves of the beams with different concrete mixtures. In fact, the proposed algorithm leads to softening curves that can be used for modeling the tensile cracking of concrete precisely. Moreover, the advantage of this algorithm is the low number of iterations for converging to an appropriate answer.

• Earthquakes and Structures
• /
• 제25권2호
• /
• pp.79-87
• /
• 2023

Special moment resisting steel frame structures are now being used commonly in highly seismic regions as seismically reliable structures. However, a very important parameter describing the dynamics of steel structures during earthquake loading, Soil Structure Interaction (SSI), is generally neglected. In this study, the significance of consideration of flexibility of soil in being able to obtain a result closer to reality is asserted. The current paper focuses on calculation of seismic fragility curves special moment resisting steel frame structures under different earthquake loadings for fixed-base and SSI models. The observation of obtained fragility curves lead to the conclusion that the SSI has a considerable effect on component fragility for the steel structures, with its effects decreasing for higher peak ground acceleration. The results show that the structures when considered SSI have a higher probability of exceeding a damage limit state. This observation attests the role of SSI in the accurate study of structural performance.

• 한국강구조학회 논문집
• /
• 제21권1호
• /
• pp.45-53
• /
• 2009

우리나라 기존철도 교량의 40% 이상이 무도상 강판형교로 구성되어 있으며, 이들 중 대부분은 1970년대 이전에 건설되었기에 일반적으로 지진하중의 고려 없이 설계되었다. 이들 무도상 강판형 철도교의 내진성능을 향상시키기 위해서는 내진성능이 부족한 요소들에 대하여 여러가지 방법의 내진보강을 수행할 수 있는데, 내진보강의 적정수위를 정하기 위해서는 이에 대한 지진위험도 평가가 필수적이라 할 수 있다. 본 연구에서는 확률적 지진 위험도 해석과 확률적 손상해석을 통해서 무도상 강판형교에 대한 지진위험도 평가를 수행하였다. 먼저 받침 및 교각을 교량의 지진 응답에 주 영향을 미치는 주요 요소로 정의하고 각 요소 별로 지진취약도를 작성하였다. 그 후 작성된 취약도를 지진재해도함수와 결합하여 각 손상상태에 해당하는 연간 손상확률을 산정하였다. 지진 위험도 해석을 통하여 50년 초과손상확률을 계산한 결과, 무근콘크리트로 되어 있는 무도상 강판형 철도교의 교각은 우리나라의 지진상황에서 위험도가 매우 낮게 나타났다. 이는 무도상 강판형교의 특성 상 가벼운 상부구조로 인하여 지진 시 하부구조에 전달되는 횡하중이 상대적으로 적기 때문인 것으로 분석된다. 반면에 선받침으로 구성된 무도상 강판형교의 받침요소들의 50년 초과 손상확률은 상대적으로 크게 나타났는데, 그 중 자유단 받침의 경우 slight damage에 대한 초과손상확률이 12.78%로 고정단 받침의 4.23%보다 높게 나타난 반면 complete damage에 대해서는 자유단 받침과 고정단 받침 모두 비슷한 수준의 초과손상확률($0.18%{\sim}0.19%$)을 보였다. 본 연구에서 수행한 지진 위험도 평가는 추후 강판형 철도교의 내진보강을 수행함에 있어서 의사결정을 뒷받침할 수 있는 자료로 효과적으로 사용될 수 있을 것이다.

• 한국지진공학회논문집
• /
• 제18권1호
• /
• pp.19-28
• /
• 2014

The seismic evaluation of electric power facilities in the switchyard of nuclear power plants is currently insufficient. In order to evaluate the seismic performance of lightning arrester subjected to four types of earthquake (near- and far-fault earthquakes, NEHRP Site Class A&B and D earthquakes), seismic fragility analysis using maximum likelihood estimation is performed considering various damage states. The comparison of the seismic fragility curves for three main parts of lightning arrester that are the busing, anchor and steel frame, reveals that the failure of lightning arrester is governed by the bushing damage mode such as porcelain cracking.

• Earthquakes and Structures
• /
• 제10권5호
• /
• pp.1181-1212
• /
• 2016

Fragility and loss functions are developed to predict damage and economic losses due to earthquake loading in Reinforced Concrete (RC) structural components with smooth rebars. The attention is focused on external/internal beam-column joints and ductile/brittle weak columns, designed for gravity loads only, using low-strength concrete and plain steel reinforcing bars. First, a number of damage states are proposed and linked deterministically with commonly employed methods of repair and related activities. Results from previous experimental studies are used to develop empirical relationships between damage states and engineering demand parameters, such as interstory and column drift ratios. Probability distributions are fit to the empirical data and the associated statistical parameters are evaluated using statistical methods. Repair costs for damaged RC components are then estimated based on detailed quantity survey of a number of pre-70 RC buildings, using Italian costing manuals. Finally, loss functions are derived to predict the level of monetary losses to individual RC components as a function of the experienced response demand.

• 한국전기전자재료학회논문지
• /
• 제21권8호
• /
• pp.711-714
• /
• 2008

Metal-oxide-semiconductor (MOS) capacitors were fabricated to investigate the plasma damage caused by reactive ion etching (RIE) on (100) oriented silicon-on-insulator (SOI) substrates. The thickness of the top-gate oxide, SOI, and buried oxide layers were 10 nm, 50 nm, and 100 nm, respectively. The MOS/SOI capacitors with an etch-damaged SOI layer were characterized by capacitance-voltage (C-V) measurements and compared to the sacrificial oxidation treated samples and the reference samples without etching. The measured C-V curves were compared to the numerical results from corresponding 2-dimensional (2-D) structures by using a Silvaco Atlas simulator.

• Structural Engineering and Mechanics
• /
• 제75권5호
• /
• pp.607-620
• /
• 2020

A numerical study is carried out to assess the dynamic response and damage level of one- and two-way reinforced concrete (RC) panels subjected to explosive loads by using finite element LS-DYNA software. The precision of the numerical models is validated with the previous experimental test. The calibrated models are used to conduct a series of parametric studies to evaluate the effects of panel wall dimensions, concrete strength, and steel reinforcement ratio on the blast-resistant capacity of the panel under various magnitudes of blast load. The results are used to develop pressure-impulse (P-I) diagrams corresponding to the damage levels defined according to UFC-3-340-02 manual. Empirical equations are proposed to easily construct the P-I diagrams of RC panels that can be efficiently used to assess its safety level against blast loads.

• 한국지진공학회논문집
• /
• 제14권5호
• /
• pp.53-64
• /
• 2010

구조물의 지진취약도 곡선은 지진의 다양한 강도를 최대지반가속도 등의 함수로 하여 몇 가지로 구분된 손상상태를 초과할 확률을 나타내는 것으로 구조물의 내진성능과 지진위험도를 평가하는데 유용하게 활용된다. 기존의 많은 연구자들이 수행한 지진취약도 곡선에 대한 연구에서 근거리 및 원거리 지진하중의 특성에 대하여 고려하지 못하였다. 본 연구에서는 근거리 및 원거리 지진으로 구분되는 지진가속도 기록을 사용하여 국내 교량의 대표적인 형식의 하나인 PSC상자형교에 대한 지진취약도 곡선을 평가하였으며 근거리와 원거리로 구분된 지진 특성이 지진취약도 곡선에 미치는 영향을 분석하였다. 예제교량의 지진취약도 곡선에 대한 근거리 및 원거리 지진의 영향이 현저한 차이를 나타내므로 지진취약도 해석시 근거리와 원거리로 구분되는 지진의 특성을 반영하여야 할 것이다.

• Geomechanics and Engineering
• /
• 제7권5호
• /
• pp.569-587
• /
• 2014

Triaxial compression creep tests were performed on salt rock samples using cyclic confining pressure with a static axial pressure. The test results show that, up to a certain time, changes in the confining pressure have little influence on creep properties of salt rock, and the axial creep curve is smooth. After this point, the axial creep curve clearly fluctuates with the confining pressure, and is approximately a straight line both when the confining pressure decreases and when it increases within one cycle period. The slope of these lines differs: it is greater when the confining pressure decreases than when it increases. In accordance with rheology model theory, axial creep equations were deduced for Maxwell and Kelvin models under cyclic loading. These were combined to establish an axial creep equation for the Burgers model. We supposed that damage evolution follows an exponential law during creep process and replaced the apparent stress in creep equation for the Burgers model with the effective stress, the axial creep damage equation for the Burgers model was obtained. The model suitability was verified using creep test results for salt rock. The fitting curves are in excellent agreement with the test curves, so the proposed model can well reflect the creep behavior of salt rock under low-frequency cyclic loading. In particular, it reflects the fluctuations in creep deformation and creep rate as the confining pressure increasing and decreasing under different cycle periods.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 센서 박막재료 반도체 세라믹
• /
• pp.178-181
• /
• 2003

In this work, we etched PZT films with various additive gases ($O_2$ and Ar) in $Cl_2/CF_4$ plasmas, while mixing ratio was fixed at 8/2. After the etching, the plasma induced damages are characterized in terms of hysteresis curves, leakage current, retention properties, and switching polarization. When the electrical properties of PZT etched in $O_2$ or Ar added $Cl_2/CF_4$ were compared, the value of remanent polarization in $O_2$ added $Cl_2/CF_4$ plasma is higher than that in Ar. added plasma. The maximum etch rate of the PZT thin films was 145 nm/min for 30% Ar added $Cl_2/CF_4$ gas having mixing ratio of 8/2 and 110 nm/min for 10% $O_2$ added to that same gas mixture. In order to recover the ferroelectic properties of the PZT thin films after etching, we annealed the etched PZT thin films at $550^{\circ}C$ in an $O_2$ atmosphere for 10 min. From the hysteresis curves, leakage current, retention property and switching polarization, the reduction of the etching damage and the recovery via the annealing was turned out to be more effective when $O_2$ was added to $Cl_2/CF_4$ than Ar. X-ray diffraction (XRD) showed that the structural damage was lower when $O_2$ was added to $Cl_2/CF_4$. And the improvement in the ferroelectric properties of the annealed samples was consistent with the increased intensities of the (100) and the (200) PZT peaks.