• Journal of Multimedia Information System
• /
• 제7권2호
• /
• pp.189-196
• /
• 2020

We have developed a device for recording biological data by inserting three electrodes and a needle with an angular velocity sensor into the moth for the purpose of measuring the electromyogram of the flapping and the corresponding lift force. With this measurement, it is possible to evaluate the moth-physiological function of moths, and the amount of pesticides that insects are exposed to (currently LD50-based standards), especially the amount of chronic low-concentration exposure, can be reduced the dose. We measured and recorded 2-channel electromyography (EMG) and angular velocity corresponding to pitch angle (pitch-like angle) associated with wing flapping for 100 sweet potato hawkmoths (50 females and 50 males) with the animals suspended and constrained in air. Overall, the angular velocity and amplitude of EMG signals demonstrated high correlation, with a correlation coefficient of R = 0.792. In contrast, the results of analysis performed on the peak-to-peak (PP) EMG intervals, which correspond to the RR intervals of ECG signals, indicated a correlation between ΔF fluctuation and angular velocity of R = 0.379. Thus, the accuracy of the regression curve was relatively poor. Using a DC amplification circuit without capacitive coupling as the EMG amplification circuit, we confirmed that the baseline changes at the gear change point of wing flapping. The following formula gives the lift provided by the wing: angular velocity × thoracic weight - air resistance - (eddy resistance due to turbulence). In future studies, we plan to attach a micro radio transmitter to the moths to gather data on potential energy, kinetic energy, and displacement during free flight for analysis. Such physiological functional evaluations of moths may alleviate damage to insect health due to repeated exposure to multiple agrochemicals and may lead to significant changes in the toxicity standards, which are currently based on LD50 values.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1740-1743
• /
• 2007

In this study, two types of fatigue tests were conducted. First, cyclic bending tests were performed using the micro-bending tester. A four-point bending test method was adopted, because it induces uniform stress fields within a loading span. Second, thermal fatigue tests were conducted using a pseudo power cycling machine which was newly developed for a realistic testing condition. The pseudo-power cycling method makes up for the weak points in a power cycling and a chamber cycling method. Two compositions of solder are tested in all test condition, one is lead-free solder (95.5Sn4.0Ag0.5Cu) and the other is eutectic lead-contained solder (63Sn37Pb). In the cyclic bending test, the solder that exhibits a good reliability can be reversed depending on the load conditions. The lead-contained solders have a longer fatigue life in the region where the applied load is high. On the contrary, the lead-free solder sustained more cyclic loads in the small load region. A similar trend was detected at the thermal cycling test. A three-dimensional finite element analysis model was constructed. A finite element analysis using ABAQUS was performed to extract the applied stress and strain in the solder joints. A constitutive model which includes both creep and plasticity was employed. Thermal fatigue was occurred due to the creep. And plastic deformation is main damage for bending failure. From the inelastic energy dissipation per cycle versus fatigue life curve, it can be found that the bending fatigue life is longer than the thermal fatigue life.

• Geomechanics and Engineering
• /
• 제11권4호
• /
• pp.531-552
• /
• 2016

The greenschist in the Jinping II Hydropower Station in southwest China exhibits continuous creep behaviour because of the geological conditions in the region. This phenomenon illustrates the time-dependent deformation and progressive damage that occurs after excavation. In this study, the responses of greenschist to stress over time were determined in a series of laboratory tests on samples collected from the access tunnel walls at the construction site. The results showed that the greenschist presented time-dependent behaviour under long-term loading. The samples generally experienced two stages: transient creep and steady creep, but no accelerating creep. The periods of transient creep and steady creep increased with increasing stress levels. The long-term strength of the greenschist was identified based on the variation of creep strain and creep rate. The ratio of long-term strength to conventional strength was around 80% and did not vary much with confining pressures. A quantitative method for predicting the failure period of greenschist, based on analysis of the stress-strain curve, is presented and implemented. At a confining pressure of 40 MPa, greenschist was predicted to fail in 5000 days under a stress of 290 MPa and to fail in 85 days under the stress of 320 MPa, indicating that the long-term strength identified by the creep rate and creep strain is a reliable estimate.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2009년도 춘계 종합학술대회 논문집
• /
• pp.442-448
• /
• 2009

최근, 기상이변으로 인해 폭설, 가뭄과 홍수 등의 자연재해가 빈번하게 발생하고 있다. 이 자연재해 중에서 홍수에 의한 피해가 가장 큰 비중을 차지하고 있고, 홍수의 큰 파괴력으로 인한 인명피해와 재산피해가 심각한 실정이다. 이러한 홍수피해로부터 구조적 비구조적 대책을 마련하기 위해서는 정확한 홍수량을 예측하는 것이 매우 중요한 일이다. 본 연구에서는 감천유역을 대상으로 유역내외의 우량관측소의 시우량자료를 사용하여 빈도해석 하였으며, HEC-HMS를 통한 유출해석방법별 확률홍수량을 산정하였다. 또한, 유출곡선지수를 변화시킴으로써 재현기간별 확률홍수량을 산정하여 민감도를 분석하였다. 유출곡선의 변화에 따른 확률홍수량 산정결과, 동일한 강우량과 지형조건에도 불구하고 선행함수조건(AMC)의 변화로 인해 크게는 홍수량이 최대 약 40%까지 증가하는 것으로 나타났다. 이는 연구대상유역에 적합한 AMC조건의 선택이 홍수량 분석에 매우 중요한 변수임을 확인할 수 있었다.

• Journal of Plant Biology
• /
• 제17권4호
• /
• pp.31-37
• /
• 1974

Seedlings of Nongbaek representing strong cold tolerant variety of rice plant, Jinheung of medium variety and Tongil of weak variety were used respectively for the present study. These seedlings were water cultured in phytotron which maintained at the daytime and night temperature of 30-$25^{\circ}C$, 20-2$0^{\circ}C$, 20-15$^{\circ}C$ and 15-1$0^{\circ}C$. The growth rate of plant height, tillering rate, increase in dry weight and absorption pattern of important mineral nutrients at their early growth stage under each temperature conditions were observed. Generally, it appeared that Nongbaek was more active in the growth of plant height than Jinheung, and Jinheung was more active than Tongil under low temperature condition. The tillering rate of these three varieties was equally rapid while it was decreased in the order of weak cold tolerant variety, such as Tongil, Jinheung and Nongbaek as the temperature declined gradually. The dry weigh tincreasing curve showed almost the same pattern in the varieties at the treatment of each temperature. Under low temperature conditions, Nongbaek showed higher absorption rate of N per dry weight and higher absorption amount of per plant body, Jinheung followed and Tongil was the lowest. The absorption amount of P2O5 increased in the top part compared with the roots as temperature rose and decreased as temperature declined. There seemed to be no difference of absorption among the varieties which have different cold tolerance each other. Under low temperature the absorption rate of K per dry weight was high, as a whole, especially Nongbaek was markedly higher than the other two. The absorption rate of Ca, Mg and Fe was also equally high in all varieties under low temperature and Nongbaek showed a more absorptive tendency in the absorption amount under low temperature.

• 한국수자원학회논문집
• /
• 제53권2호
• /
• pp.121-129
• /
• 2020

도시화로 인한 불투수층 증가와 하천 주변 개발은 홍수 시 위험에 노출되는 재해요인의 증가뿐 아니라 피해의 파급을 발생시켜 홍수 관리 측면에서 어려움을 낳는다. 홍수 방재대책을 위해서는 도시지역에 분포하는 다양한 지표면 공간특성을 반영하여 침수가 예상되는 지역에 대한 파악이 우선시되어야 한다. 본 연구에서는 도시하천의 홍수 위험지역을 대상으로 확률적 홍수위험 평가가 수행되었다. 홍수와 관련된 지형적 영향요인인 고도, 경사, 유출곡선지수, 하천까지 거리를 예측변수로 하여 하천 주변 침수 예상지역을 설명하기 위해 모형의 학습데이터로 100년 빈도 홍수위험 지도가 사용되었다. 연구 대상 지역은 격자로 변환하여 Bayesian Logistic 회귀분석을 수행하여 각 격자별로 홍수영향요인이 침수 여부를 설명하는 모형을 구축하였다. 최종적으로 모형을 통해 대상 지역 전체에 대하여 침수위험도를 확률적으로 제시하였다.

• 한국지반공학회논문집
• /
• 제28권5호
• /
• pp.95-107
• /
• 2012

반복하중에 의하여 유발되는 과잉간극수압 예측의 중요성은 잘 알려져 있지만 이를 고려한 유효응력해석은 수치 모델 변수 산정의 어려움으로 인하여 극히 드물게 수행되고 있다. 본 논문에서는 반복하중에 의하여 흙에 발생하는 과잉간극수압을 예측하는 새로운 응력 기반 수치적 모델을 개발하였다. 본 모델의 가장 큰 장점은 진동삼축시험으로 부터 획득된 CSR-N 곡선만으로 모든 변수를 결정할 수 있다는 점이다. 이 모델의 추가적인 장점은 모든 하중형태에 대해서 적용될 수 있으므로 시간영역 유효응력해석 프로그램에 적용될 수 있다는 점이다. 개발된 모델의 정확성은 문헌에 제시된 시험결과와 국내에서 수행된 시험결과와의 비교를 통하여 검증되었다. 나아가 기존의 응력기반 모형과의 성능 비교 결과 제안된 모델은 정확성과 사용 편리성이 모두 우수한 것으로 나타났다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.105-110
• /
• 2001

It has recently been raised main issue how solve the problem of insufficient energy. One of the solution is to increase the thermal efficiency of power generation system. For the purpose of high efficiency, it is necessary to increase the steam temperature and pressure. So, the use of modified $9{\sim}12%Cr$ steel having superior creep rupture strength and oxidation resistance is required to endure such severe environment. The evaluation of creep properties of those heat resistance material is very important to secure the reliability of high temperature and pressure structural components. Since creep properties are determined by microstructural change such as carbide precipitation and coarsening, It is certain that there are some relationship between creep properties and hardness affected by microstructure. In this study, SP-Creep ruptured test for newly developed 9Cr steel being used as boiler valve material was performed, and creep properties of the material were evaluated. Also, hardness test were performed and hardness results were related to the creep properties such as LMP and creep strength to verify the availability of SP-Creep test as creep test method.

• 복식
• /
• 제57권3호
• /
• pp.14-22
• /
• 2007

This study is about the excavated costume representing fundamental "Conservation and Restoration". It's not a report of a specific case, but it is a guideline that contains the costume and textile of museum collection. It is not research based on experiments; however, this paper is basically consists of various reported-documents. Followings are the conclusions of this study 1. These are the factors that we have to know to prevent the causes of fabric's degradation. -Light, -Humidity and temperature, -Microscopic organism, -Insect and rodent animal, -Air pollution, -Ph, -Handling 2. Basic principles of conservation and restoration follows are: -Select the Reversible method, -Represent the easily distinguishable repaired place, -Should be acted by an expert or people with experience, -Before the restoration, accurate and specified records should be completed, -Procedure, treatment method, and materials used should be recorded prior to restoration, -Should be cared minimally, -Be cautious when using the conservation materials, -When caring, make sure nothing is against the principle of aesthetic, historic, and form of preservation 3. The types of restoration are type of straight or curve, type of hole, type of without warp or weft, type of special part damage something like sleeve, collar, type of form that is severely damaged, and type of separated pieces. 4. The method of restoration is sewing, stitching, and the combination of sewing and stitching. 5. The restoration seams are welt seam, plain seam, flat felled seam, french seam etc. And there are kinds of used-sewing, such as, broad stitching, backstitch, half backstitch, basking, hemming, saddle stitching etc.

• The Plant Pathology Journal
• /
• 제35권6호
• /
• pp.654-661
• /
• 2019

The soybean cyst nematode, Heterodera glycines, is a major plant-parasitic nematode that has caused important economic losses to Korea's soybean production. Four species of cyst nematodes, H. schachtii, H. glycines, H. trifolii, and H. sojae, all belong to schachtii group are coexist in field soil in Korea. The rapid identification of the nematode is crucial for preventing crop damage and in decision making for controlling this nematode. This study aimed to develop a species-specific primer set for quantitative PCR (qPCR) assay of H. glycines. The specific primer set (HGF1 and HGR1) for H. glycines was designed based on the cytochrome c oxidase subunit I (COI) sequence of mitochondrial DNA. After optimization, it is possible to identify the H. glycines using a qPCR assay with DNA extracted from a single cyst and single second-stage juvenile (J2). The specificity was confirmed by the absence of SYBR fluorescent signals of three other Heterodera species. A serial dilution of DNA extracted from a single cyst was obtained for the sensitivity test. The result showed that the standard curve of the test had a highly significant linearity between DNA concentration and Ct value (R² = 0.996, slope = -3.49) and that the detection limit concentration of DNA of the primer set was 10 pg of DNA per reaction. Our findings suggested that H. glycines could be distinguished from H. sojae and other Heterodera species when a qPCR assay is used with a specific primer set.