• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.465-466
• /
• 2002

In any mechanical system consisting of gears, shafts and/or bearings, the majority of metallic particles deposited into and carried by the lubrication system originate from the deterioration of oil-wetted working surfaces, even in proper lubrication system, due to failure mechanism (s) such as wear, fatigue and fretting corrosion. Determination of the point at which transition from normal to abnormal or to actual damage occurs has become a focus of attention in research activities for years, because it has been recognized that reliable, economic operation can be achieved through appropriate preventative measures. Known collectively from 'all size wear debris analysis' as early failure detection, the methods of testing for damage differ considerably, range from a micron or a submicron size debris analysis to Magnetic Chip Detector (MCD) ferrous debris analysis. This paper will be focused on the utilization of the low-cost analysis techniques for evaluation of industrial machinery condition.

• Magazine of the Korea Concrete Institute
• /
• v.9 no.5
• /
• pp.137-148
• /
• 1997

지진이 발생하는 환경에서 철근콘크리트구조의 신뢰성을 수명주기비용에 근거하여 체계적으로 평가하는 방법을 제시하였다. 구조물의 기능성과 경제적인 효용성을 나타내기 위하여 각각 손상확률과 평균수명 주기비용의 개념을 사용하였다. 생애주기 동안 발생할 수 있는 지진에 의하여 구조물이 입게 될 손상을 보상하기 위하여 소요되는 평균손상비용을 평균수명주기비용의 주요 항목으로 고려하여 분석하였다. 구조물의 다양한 손상상태에서 손상비용을 나타내기 위해 요구되는 비용함수는 Park-Ang 손상지수의 중앙값을 독립변수로 하는 함수로 가정하였다. 지진에 의한 구조물의 손상해석은 UCI에서 개발된 SMART-DRAIN의 시뮬레이션기법을 사용하여 그 불확실성을 고려하였다. 제시된 방법을 현행 규준에 의하여 설계된 7층 사무실 건물에 적용하여 그 가능성을 살펴보았다.

• Smart Structures and Systems
• /
• v.5 no.4
• /
• pp.469-482
• /
• 2009

The emerging sensor-based structural health monitoring (SHM) technology has a potential for cost-effective maintenance of aging civil infrastructure systems. The author proposes to integrate continuous and global monitoring using on-structure sensors with targeted local non-destructive evaluation (NDE). Significant technical challenges arise, however, from the lack of cost-effective sensors for monitoring spatially large structures, as well as reliable methods for interpreting sensor data into structural health conditions. This paper reviews recent efforts and advances made in addressing these challenges, with example sensor hardware and health monitoring software developed in the author's research center. The hardware includes a novel fiber optic accelerometer, a vision-based displacement sensor, a distributed strain sensor, and a microwave imaging NDE device. The health monitoring software includes a number of system identification methods such as the neural networks, extended Kalman filter, and nonlinear damping identificaiton based on structural dynamic response measurement. These methods have been experimentally validated through seismic shaking table tests of a realistic bridge model and tested in a number of instrumented bridges and buildings.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.111-118
• /
• 2022

Conflicts in public construction projects become more serious and complex so that they have a negative effect on performance of projecets. Conflicts in public construction projects are defined as expanding in complaints. This study analyzes the relationship structure and effect on performance between complaints and conflicts. First of all, 219 survey data collected from industry experts were used to derive complaints arising from the project and to understand the characteristics of each complaint. In the case of environmental damages, rather than environmental damage during construction, harmful substances or effects that can occur in completed facilities cause complaints from local residents, and opposition from environmental groups has a great effect on time and cost increase. As for safety damage, civil complaints related to prevention and countermeasures for safety accidents occur frequently, and additional construction affects cost increases. Through this study, it is possible to understand the serious complaints that are prone to conflict in public construction projects, their frequency, and the performance of the project.

• Steel and Composite Structures
• /
• v.25 no.4
• /
• pp.485-496
• /
• 2017

In this paper, damage detection has been introduced as an optimization problem and a two-step method has been proposed that can detect the location and severity of damage in truss structures precisely and reduce the volume of computations considerably. In the first step, using the residual force vector concept, the suspected damaged members are detected which will result in a reduction in the number of variables and hence a decrease in the search space dimensions. In the second step, the precise location and severity of damage in the members are identified using the genetic algorithm and the results of the first step. Considering the reduced search space, the algorithm can find the optimal points (i.e. the solution for the damage detection problem) with less computation cost. In this step, the Efficient Correlation Based Index (ECBI), that considers the structure's first few frequencies in both damaged and healthy states, is used as the objective function and some examples have been provided to check the efficiency of the proposed method; results have shown that the method is innovatively capable of detecting damage in truss structures.

• Structural Engineering and Mechanics
• /
• v.15 no.1
• /
• pp.53-70
• /
• 2003

The motivation of this paper is to introduce the modern technology of large-scale cooling tower design. Thereby the innovative design concept for the world's largest cooling tower with a height of 200 m is briefly presented (Harte & Kr$\ddot{a}$tzig 2002, Bush et al. 2002). The new concept was considered not only for safety, but also for preservation of the durability of the structure, because cracking damage in large cooling towers in general cause extremely high cost of maintenance and repair. The paper demonstrates numerically the damage process in large cooling towers (Kr$\ddot{a}$tzig et al. 2001), and describes some basics of the numerical finite element approach for damage propagation modelling of shell structure. A prototype is analysed to trace the progressive damage process, whereby the changes in the dynamical behaviour of the structure, as mirrored in its natural frequencies and the corresponding mode shapes, are presented and discussed. Finally, the example shows that such damage processes develop progressively over the life-time of the shell structure.

• Earthquakes and Structures
• /
• v.7 no.5
• /
• pp.609-626
• /
• 2014

The capabilities of a high-resolution Digital Image Correlation (DIC) system are presented within the context of deformation measurements of full-scale concrete columns tested under reversed cyclic loading. The system was developed to have very high-resolution such that material strains on the order of the cracking stain of concrete could be measured on the surface of full-scale structural members. The high-resolution DIC system allows the measurement of a wide range of deformations and strains that could only be inferred or assumed previously. The DIC system is able to resolve the full profiles of member curvatures, rotations, plasticity spread, shear deformations, and bar-slip induced rotations. The system allows for automatic and objective measurement of crack widths and other damage indices that are indicative of cumulated damage and required repair time and cost. DIC damage measures contrast prevailing proxy damage indices based on member force-deformation data and subjective damage measures obtained using visual inspection. Data derived from high-resolution DIC systems is shown to be of great use in advancing the state of behavioral knowledge, calibrating behavioral and analytical models, and improving simulation accuracy.

• Smart Structures and Systems
• /
• v.33 no.4
• /
• pp.263-279
• /
• 2024

With the increasing diversity of internet media, available video data have become more convenient and abundant. Related video data-based research has advanced rapidly in recent years owing to advantages such as noncontact, low-cost data acquisition, high spatial resolution, and simultaneity. Additionally, structural nonlinearity extraction has attracted increasing attention as a tool for damage evaluation. This review paper aims to summarize the research experience with the recent developments and applications of video data-based technology for structural nonlinearity extraction and damage evaluation. The most regularly used object detection images and video databases are first summarized, followed by suggestions for obtaining video data on structural nonlinear damage events. Technologies for linear and nonlinear system identification based on video data are then discussed. In addition, common nonlinear damage types in disaster events and prevalent processing algorithms are reviewed in the section on structural damage evaluation using video data uploaded on online platform. Finally, a discussion regarding some potential research directions is proposed to address the weaknesses of the current nonlinear extraction technology based on video data, such as the use of uni-dimensional time-series data as leverage to further achieve nonlinear extraction and the difficulty of real-time detection, including the fields of nonlinear extraction for spatial data, real-time detection, and visualization.

• Environmental Engineering Research
• /
• v.20 no.1
• /
• pp.59-63
• /
• 2015

About 4,500 mass burial sites of carcasses from the 2010/2011 outbreak of Foot-and-Mouth (FMD) disease in Korea show very slow stabilization speed, although more than 3 years have passed. Therefore, a plan is being considered to boost the speed of stabilization or removal. This is a study on the social value of the removal plan for 4,500 mass burial sites from the 2010/2011 outbreak of FMD in Korea. This valuation is based on the survey of 1,000 people living all over Korea. Korean people have a willingness to pay 101.2 billion Korean Won (about US $100 million). This value is a large amount, but it is small compared to the cost of a FMD outbreak. The cost for the Korean government from 5 outbreaks since 2000 ranged from 28.8 billion Won to 3.2 trillion Won. These were the costs only paid by the Korean government. One estimate reported that there would be a total damage of 1.4 trillion Won, if FMD outbreak occurs in Jeju Islands, a small part of Korea. If burial sites have very slow stabilization speed and some hazardous contents, the social damage will exceed the removal cost.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.5
• /
• pp.29-36
• /
• 2002

In the maintenance and retrofit planning of a bridge system, the optimal strategy for inspection and repair are suggested by minimizing the expected total life-cycle cost, which includes the initial cost, the costs of inspection, repair, and failure. Degradation of seismic performance is modeled by using a damage function. And failure probability is computed according to the degree of damage detection by random vibration theory and the event tree analysis. As an example to illustrate the proposed approach, a 10-span continuous bridge structure is used. The numerical results show that the optimum number of the inspection and the repair are increased, as the seismic intensity is increased and the soil condition of a site becomes more flexible.