• Structural Engineering and Mechanics
• /
• v.49 no.3
• /
• pp.411-425
• /
• 2014

This paper presents the processing of nonlinear features associated with a damage event by quadratic time-frequency distributions for damage identification in a frame structure. A time-frequency distribution is a function which distributes the total energy of a signal at a particular time and frequency point. As the occurrence of damage often gives rise to non-stationary, nonlinear structural behavior, simultaneous representation of the dynamic response in the time-frequency plane offers valuable insight for damage detection. The applicability of the bilinear time-frequency distributions of the Cohen class is examined for the damage assessment of a frame structure from the simulated acceleration data. It is shown that the changes in instantaneous energy of the dynamic response could be a good damage indicator. Presence and location of damage can be identified using Choi-Williams distribution when damping is ignored. However, in the presence of damping the Page distribution is more effective and offers better readability for structural damage detection.

• Geomechanics and Engineering
• /
• v.37 no.6
• /
• pp.565-576
• /
• 2024

In this study, the earthquake risk assessment of single-story RC precast buildings in Turkey was carried out using loss curves. In this regard, Kocaeli, a seismically active city in the Marmara region, and this building class, which is preferred intensively, were considered. Quality and period parameters were defined based on structural and geometric properties. Depending on these parameters, nine main sub-classes were defined to represent the building stock in the region. First, considering the mean fragility curves and four different central damage ratio models, vulnerability curves for each sub-class were computed as a function of spectral acceleration. Then, probabilistic seismic hazard analyses were performed for stiff and soft soil conditions for different earthquake probabilities of exceedance in 50 years. In the last step, 90 loss curves were derived based on vulnerability and hazard results. Within the scope of the study, the comparative parametric evaluations for three different earthquake intensity levels showed that the structural damage ratio values for nine sub-classes changed significantly. In addition, the quality parameter was found to be more effective on a structure's damage state than the period parameter. It is evident that since loss curves allow direct loss ratio calculation for any hazard level without needing seismic hazard and damage analysis, they are considered essential tools in rapid earthquake risk estimation and mitigation initiatives.

• Journal of Welding and Joining
• /
• v.28 no.5
• /
• pp.69-74
• /
• 2010

Irradiation behavior of the reactor pressure vessel SA508 class 3 steel weld metals was examined by Charpy V Notch impact specimens. The specimens were exposed to a fluence of $2.8{\times}1019$ neutrons(n)/$cm^2$(E>1 MeV) at $288^{\circ}C$. The irradiation damage of weld metal was evaluated by comparison between unirradiated and irradiated specimens in terms of absorbed energy and lateral expansion. The specimens for neutron irradiation were welded by submerged arc welding process at a heat input of 3.2 kJ/mm which showed good toughness in terms of weld microstructure, absorbed energy and lateral expansion. The post-irradiation Charpy V notch 41J and 68J transition temperature elevation were $65^{\circ}C$ and $70^{\circ}C$, respectively. This elevation was accompanied by a 20% reduction in Charpy V notch upper shelf energy level. The lateral expansion at 0.9mm irradiated Charpy specimens showed temperature elevation of $65^{\circ}C$ and was greatly decreased due to radiation damage.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.36 no.4
• /
• pp.402-408
• /
• 2003

A quantitative method was suggested for estimating damages in fishery production due to the diffusion and deposition of suspended silt and clay by various construction processes in tidal flat fishing grounds. Marine populations are maintained through the process of spawning, growth, recruitment, natural death and death by fishing each year. All of the year classes of the population in a fishery ground could be affected when damages occur by human activities such as land filling or reclamation. The propose of this study is to calculate damages in terms of fishery production using a quantitative population dynamic method. If the maximum age in the population is $X_\lambda,$ the starting year of damage is $t_s,$ and the ending year of damage is $t_e,$ the number of year classes damaged is $t_{s-n\lambda}-t_e,$ Many year classes present in the year $t_s,$ and so if damages occur, they Influence all the year classes which are present in the population. Damaged year classes in year $t_e$ would still be in the population until the year $t_{e+n\lambda}$, where $n_{\lambda}$ is the oldest age class. If the expected yield of a year class is constant, the total yield from year classes in the fishing ground during the construction periods can be calculated as follows: $Y_\Phi=[(t_e-t_s+1)+n_c]{\cdot}Y_E+\sum\limits^{n_\lambda-n_c}_{l=1}\;\sum\limits^{n_\lambda-n_c}_{l=i}\;Y_{n_c+i}$ This method was applied for damage estimation in the production of Ruditapes philippinarum in a tidal flat fishing ground.

• Smart Structures and Systems
• /
• v.14 no.2
• /
• pp.85-104
• /
• 2014

Damage detection is a challenging, complex, and at the same time very important research topic in civil engineering. Identifying the location and severity of damage in a structure, as well as the global effects of local damage on the performance of the structure are fundamental elements of damage detection algorithms. Local damage detection is essential for structural health monitoring since local damages can propagate and become detrimental to the functionality of the entire structure. Existing studies present several methods which utilize sensor data, and track global changes in the structure. The challenging issue for these methods is to be sensitive enough in identifYing local damage. Autoregressive models with exogenous terms (ARX) are a popular class of modeling approaches which are the basis for a large group of local damage detection algorithms. This study presents an algorithm, called Influence-based Damage Detection Algorithm (IDDA), which is developed for identification of local damage based on regression of the vibration responses. The formulation of the algorithm and the post-processing statistical framework is presented and its performance is validated through implementation on an experimental beam-column connection which is instrumented by dense-clustered wired and wireless sensor networks. While implementing the algorithm, two different sensor networks with different sensing qualities are utilized and the results are compared. Based on the comparison of the results, the effect of sensor noise on the performance of the proposed algorithm is observed and discussed in this paper.

• Imaging Science in Dentistry
• /
• v.40 no.2
• /
• pp.75-81
• /
• 2010

Purpose : This study is aimed to evaluate the position of mandibular foramen of mandibula prognathism patients using 3-dimensional CT images in order to reduce the chance of an anesthetic failure of the mandibular nerve and to prevent the damage to the inferior alveolar nerve during the orthognathic surgery. Materials and Methods : The control group consist of 30 patients with class I occlusion. The experimental group consist of 44 patients with class III malocclusion. Three-dimensional computed tomography was used to evaluate the position of the mandibular foramina. Results : The distance between mandibular plane and mandibular foramen, class I was 25.385 mm, class III was 23.628 mm. About the distance between occlusal plane and mandibular foramen, class I was 1.478 mm, class III was 5.144 mm. The distance between posterior border plan of mandibular ramus and mandibular foramen had not statistically significant. About the distance between sagittal plane of mandible and mandibular foramen did not also showed statistically significant. Conclusion : The result of this study could help the clinicians to apprehend more accurate anatomical locations of the foramina on the mandible with various facial skeletal types. thereby to perform more accurate block anesthesia of the mandibular nerve and osteotomy with minimal nerve damage. In addition, this study could provide fundamental data for any related researches about the location of the mandibular foramina for other purposes.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.13 no.5
• /
• pp.41-50
• /
• 2009

Following an earthquake, the major concerns for damaged buildings are their safety/risk in the event of aftershocks, and thus a quantitative damage assessment must be performed in order to evaluate their residual seismic capacity and to identify necessary actions for the damaged buildings. Post-event damage evaluation is therefore as essential for the quick recovery of a damaged community as pre-event seismic evaluation and strengthening of vulnerable buildings. The objective of this study is to develop a post-earthquake seismic evaluation method for RC frames with URM infill wall for typical school buildings. For this purpose, full-scale, one-bay, single-story specimens having different axial loads in columns are tested under cyclic loadings. During the tests, residual crack widths, which can also be found in damaged buildings, are measured in order to estimate the residual seismic capacity from the observed damage. In this paper, the relationship between the measured residual crack width and the residual seismic capacity is discussed analytically and experimentally, and reduction factors are proposed to estimate the residual seismic capacity based on the observed damage level.

• The Korean Journal of Air & Space Law and Policy
• /
• v.22 no.2
• /
• pp.53-83
• /
• 2007

The purpose of this paper is to study precedent cases of the Air carrier liability for passengers. The article 17 of Warsaw Convention (also in Montreal Convention article 17-1) provides the Air carrier liability for passengers which is the most essential part of the Air carrier liability. According to these Conventions, 1) the carrier is liable for damage sustained in case of death or bodily injury of a passenger. Precedents and theories have disagreements on whether the damage covers the mental injury as well. 2) The carrier is liable for damage sustained from aviation accident. The definition of 'aviation accident' is becoming problematic. 3) The carrier is liable for damage sustained in case of death or bodily injury of a passenger upon condition only that the accident which caused the death or injury took place on board the aircraft or in the course of any of the operations of embarking or disembarking. The question at issue is the range of the operations of embarking or disembarking. This paper introduces the precedents (also, the model precedents) about the carriers liability for passengers and related cases, so as to help understand the trend of judicial decisions. Furthermore, the cases, once took all of the attention of the international air carriers, concerned with the 'Economy class syndrome' (DVT : Deep Vein Thrombosis) are also presented. Under the new Montreal Convention, the carriers liability for passengers will continue to be the main issue. Thus it is required that academics as well as practical businesses may keep up their studies about this issue.

• Nutrition Research and Practice
• /
• v.17 no.2
• /
• pp.228-240
• /
• 2023

BACKGROUND/OBJECTIVES: Cocoa consumption is associated with health benefits due to its high content of polyphenols. However, the effects of short-term cocoa consumption remain unclear. We aimed to determine the effects generated by cocoa consumption (for 7 days) in young adults in normoweight and class II obesity. SUBJECTS/METHODS: Before-and-after study was carried out in normoweight (NW) (n = 15) and class II obesity (CIIO) (n = 15) young adults. The NW and CIIO participants consumed 25 and 39 g of cocoa, respectively, per day for 7 days. The effect of cocoa consumption was evaluated on the lipid profile, insulin resistance (IR), and inflammation. Oxidative damage was also examined by assessing the biomarkers of oxidative damage in plasma. In addition, recombinant human insulin was incubated with blood obtained from the participants, and the molecular damage to the hormone was analyzed. RESULTS: Cocoa consumption resulted in decreased low-density lipoprotein-cholesterol in both groups (P = 0.04), while the total cholesterol, high-density lipoprotein cholesterol, and triglycerides were maintained at the recommended levels. Initially, IR was detected in the CIIO group (homeostasis model assessment [HOMA] = 4.78 ± 0.4), which is associated with molecular damage to insulin. Interestingly, intervention with cocoa resulted in improved IR (HOMA = 3.14 ± 0.31) (P = 0.0018) as well as molecular damage to insulin. Finally, cocoa consumption significant decreased the arginase activity (P = 0.0249) in the CIIO group; this is a critical enzymatic activity in the inflammatory process associated with obesity. CONCLUSIONS: The short-term consumption of cocoa improves the lipid profile, exerts anti-inflammatory effects, and protects against oxidative damage. Results of this study indicate that cocoa consumption can potentially improve IR and restore a healthy redox status.

• Smart Structures and Systems
• /
• v.8 no.3
• /
• pp.253-274
• /
• 2011

In this paper, the harmonic displacement response of a damaged square plate with all-over part-through damage parallel to one edge is utilized as the input signal function in wavelet analysis. The method requires the properties of the damaged plate, i.e., no information about the original undamaged structure is required. The location of damage is identified by sudden changes in the spatial variation of transformed response. The incurred damage causes a change in the stiffness or mass of the plate. This causes a localized singularity which can be identified by a wavelet analysis of the displacement response. In this study via numerical examples shown by using harmonic response is more versatile and effective compared with the static deflection response, specially in the presence of noise. In the light of the obtained results, suggestions for future work are presented and discussed.