• 한국농공학회논문집
• /
• 제63권5호
• /
• pp.49-62
• /
• 2021

The objective of this study was to evaluate the flood control capacity of the agricultural reservoir based on state-of-the-art climate change scenario - SSP (Shared Socioeconomic Pathways). 18 agricultural reservoirs were selected as the study sites, and future rainfall data based on SSP scenario provided by CMIP6 (Coupled Model Intercomparison Project 6) was applied to analyze the impact of climate change. The frequency analysis module, the rainfall-runoff module, the reservoir operation module, and their linkage system were built and applied to simulate probable rainfall, maximum inflow, maximum outflow, and maximum water level of the reservoirs. And the maximum values were compared with the design values, such as design flood of reservoirs, design flood of direct downstream, and top of dam elevation, respectively. According to whether or not the maximum values exceed each design value, cases were divided into eight categories; I-O-H, I-O, I-H, I, O-H, O, H, X. Probable rainfall (200-yr frequency, 12-h duration) for observed data (1973~2020) was a maximum of 445.2 mm and increased to 619.1~1,359.7 mm in the future (2011~2100). For the present, 61.1% of the reservoirs corresponded to I-O, which means the reservoirs have sufficient capacity to discharge large inflow; however, there is a risk of overflowing downstream due to excessive outflow. For the future, six reservoirs (Idong, Baekgok, Yedang, Tapjung, Naju, Jangsung) were changed from I-O to I-O-H, which means inflow increases beyond the discharge capacity due to climate change, and there is a risk of collapse due to dam overflow.

• 한국농공학회논문집
• /
• 제61권2호
• /
• pp.13-23
• /
• 2019

In this study, an overtopping model experiments and three dimensional seepage characteristics at the deteriorated homogeneous reservoirs were performed to investigate the behavior of failure for embankment and spillway transitional zone due to overtopping. The failure pattern, pore water pressure, earth pressure and settlement by overtopping were compared and analyzed. The pattern of the failure by overtopping was gradually enlarged towards reservoirs crest from the spillway transition zone at initial stage. In the rapid stage and peak stage, the width and depth of failure gradually increased, and the pattern of the failure appeared irregular and several direction of the erosion. In the early stage, the pore water pressure at spillway transitional zone was more affected as its variation and failure width increased. In the peak stage, the pore water pressure was significantly increased in all locations due to the influence of seepage. The earth pressure increased gradually according to overtopping stage. The pore pressure by the numerical analysis was larger than the experimental value, and the analysis was more likely to increase steadily without any apparent variation. The horizontal and vertical displacements were the largest at the toe of slope and at the top of the dam crest, respectively. The results of this displacement distribution can be applied as a basis for determining the position of reinforcement at the downstream slope and the crest. The collapse in the overtopping stage began with erosion of the most vulnerable parts of the dam crest, and the embankment was completely collapsed as the overtopping stage increased.

• 한국지반환경공학회 논문집
• /
• 제19권4호
• /
• pp.33-38
• /
• 2018

제체 재료의 다짐 불량에 의한 내부 침식은 국내 제방의 주요 붕괴 원인으로, 제방의 안전진단에 있어서 제체의 다짐 상태 평가는 매우 중요한 점검 사항이다. 본 연구에서는 제체의 다짐상태 평가 시 동적 콘 관입시험의 현장 적용성을 검증하기 위해 대표적인 다짐평가 기법인 평판재하시험에 대해 상관관계를 분석하였다. 시험 부지의 지반 특성 및 토층 심도를 파악하기 위해 표준관입시험을 6회 수행하였다. 평판재하시험 15회, 동적 콘 관입시험 47회 수행 후 크리깅(Kriging) 기법으로 공간분포를 얻었다. 평판재하시험의 공간분포와 일정 관입깊이에서의 동적 콘 관입시험 공간분포 간의 피어슨 상관 계수를 계산하였다. 평판재하시험의 지지력과 관입 깊이 5cm, 10cm, 15cm에서의 동적 콘 관입시험의 타격횟수는 약한 양의 상관관계를 갖는 것으로 나타났다.

• 건축역사연구
• /
• 제20권3호
• /
• pp.7-22
• /
• 2011

With the accumulations of outcomes from archaeological excavations of mountain fortress of three kingdoms period, there have been studies about time-periodic territory range of mountain fortress, difference in the way(method) of construction, defence system and so on from various points of view. This is an empirical study on the construction method of the valley part of stone fortress. First of all, it is required to secure large quantity of fresh water for those who lived at mountain fortress. Especially when builders of fortress construct a fortification at the valley part of stone fortress, in advance they must sufficiently consider several options including the establishment of sustainable water resources. First, when it comes to build a fortification on a ridge[or a slope] of a mountain, you have only to consider a vertical stress. However, when it comes to build a fortification at the valley part of a mountain, You must have more sufficient preparations for the constructing process. Because there are not only a vertical stress but also a horizontal pressure simultaneously. Second, a fortification of mountain fortress built by using unit building stone is a structure of masonry construction like brick construction, and the valley part of it is where the construction of the fortification begins. Third, when it comes to build a fortification at the valley part of a mountain, it seems that they use a temporary method such as coffer dam in oder to prevent the collapse of the fortification due to heavy rain. Furthermore, in response to a horizontal pressure a fortification is built by the way of its plane make an arch, or by piling up the soil with the plate method(類似版築) and earthen wall harder method(敷葉) they increase cross-sectional area of the fortification and its cutoff capacity. In front direction they put the reservoir facility for the fear that the hydraulic pressure and earth pressure are directly transmitted to the fortification. The process of constructing the fortification at the valley part of a mountain is done in the same oder as follows; leveling of ground(整地) ${\Rightarrow}$ construction of coffer dam ${\Rightarrow}$ construction of the fortification between the both banks of the valley ${\Rightarrow}$ construction of the fortification at bottom part of spill way(餘水路) between the both banks of the valley ${\Rightarrow}$ construction of spill way(餘水路) & reservoir facility ${\Rightarrow}$ construction of the fortification at upper part of spill way between the both banks of the valley. Coffer dam facility seems to be not only the protection device on occasion of flood but also an important criterion to measure the proper height of spill way or tailrace(放水路). This study has a meaningful significance in that it empirically examines the method of reduction of the horizontal pressure which the fortification at the valley part of a mountain takes, the date the construction was done, and wether the changes in climate such as heavy rainfall influence the process of construction.

• 한국안전학회지
• /
• 제31권2호
• /
• pp.76-82
• /
• 2016

A 2-D hydrodynamic model for predicting the movement of debris flow was developed. The developed model was validated against a dam break flow problem conducted in EU CADAM project, and the performance of the model was shown to be satisfactory. In order to suggest structural alternative for hazardous zone vulnerable to debris flow disaster, two types of initial mass distribution and two shapes of defensive structure were considered. It was found that 1) the collapse of debris mass initiated with square pyramid shape induced more damage compared with that of cubic shape; and 2) a defensive structure with semi-circular shape was vulnerable to debris flow disaster in terms of debris control or primary defense compared with that of rectangular-shaped structure.

• 대한기계학회논문집B
• /
• 제28권11호
• /
• pp.1348-1358
• /
• 2004

The filling pattern and an adaptive grid refinement based on the finite element method and Eulerian mesh advancement approach have been developed to analyze incompressible transient viscous flow with free surfaces. The governing equation fur flow analysis is Navier-Stokes equation including inertia and gravity effects. The mixed FE formulation and predictor-corrector method are used effectively for unsteady numerical simulation. The flow front surface and the volume inflow rate are calculated using the filling pattern technique to select an adequate pattern among seven filling patterns at each tetrahedral control volume. By adaptive grid refinement, the new flow field that renders better prediction in flow surface shape is generated and the velocity field at the flow front part is calculated more exactly. In this domain the elements in the surface region are made finer than those in the remaining regions for more efficient computation. The collapse of a water dam and the filling of a fluidity spiral have been analyzed. The numerical results have been in good agreement with the experimental results and the efficiency of the adaptive grid refinement and filling pattern techniques have been verified.

• 한국안전학회지
• /
• 제37권4호
• /
• pp.92-100
• /
• 2022

Of the Korean military's 3,959 ammunition depots, 1,007 - more than 25% - violate safety requirements for distance and equipment. There is a risk of explosion in old depots that are vulnerable to various interior and exterior accidents. This paper examines 10 scenarios, with varying values for ammunition amount and safety distance. The study calculated the overpressure that can be applied to risk-exposure objects, based on the safety distance; expected damage was predicted using constructed spatial information from 3D explosion simulations. The simulations confirmed that explosion overpressure increased the most when the safety distance violation rate increased from 80% to 90%. It also confirmed that secondary damage such as fire and explosion can cause casualties and property damage when the violation rate is 60% or higher. The results show that building collapse becomes a risk with a violation rate of 70% or higher. We conclude that taking ammunition depot safety distance violation into account when planning military facilities and their land utilization could better protect life and property.

• Geomechanics and Engineering
• /
• 제36권3호
• /
• pp.247-258
• /
• 2024

Tailings are waste materials of mining operations, consisting of a mixture of clay, silt, sand with a high content of unrecoverable metals, process water, and chemical reagents. They are usually discharged as slurry into the storage area retained by dams or earth embankments. Poor knowledge of the hydro-mechanical behaviour of tailings has often resulted in a high rate of failures in which static liquefaction has been widely recognized as one of the major causes of dam collapse. Many studies have dealt with the static liquefaction of coarse soils in saturated conditions. This research provides an extension to the case of silty tailings in unsaturated conditions. The static liquefaction resistance was evaluated in terms of stress-strain behavior by means of monotonic triaxial tests. Its dependency on the preparation method, the volumetric water content, the void ratio, and the degree of saturation was studied and compared with literature data. The static liquefaction response was proved to be dependent mainly on the preparation technique and degree of saturation that, in turn, controls the excess of pore pressure whose leading role is investigated by means of the relationship between the -B Skempton parameter and the degree of saturation. A preliminary interpretation of the static liquefaction response of Stava tailings is also provided within the Critical State framework.

• 대한토목학회논문집
• /
• 제28권3B호
• /
• pp.261-270
• /
• 2008

최근 진행된 정밀 수치해석 기법의 비약적인 발전에도 불구하고 SPH 등과 같은 고급수치기법의 수자원 분야에서의 활용은 그리 활발해 보이지 않는다. 대규모 수계를 대상으로 한 flood routing의 경우 비선형 천수방정식으로 대표되는 depth averaged approach가 효과적이나 정밀한 범람고 예단에는 오류가 야기될 수 있다. 본 고에서는 SPH 수치해석 기법의 수자원 분야로의 적용가능성을 모색하기 위해 비교적 수리모형실험자료가 풍부한 제체붕괴로 인한 수리현상을 수치모의하였다 (Martin과 Moyce, 1952). 보다 완벽한 검증을 위해 수로에 장애물이 거치된 경우 (Koshizuka 등, 1995), 수문의 갑작스런 개방으로 인한 수로에서의 수리현상 (Janosi 등, 2004) 등 점진적으로 난이도를 높여 수치모의를 수행하였다. 동수역학 모형 방정식으로는 Navier-Stokes 방정식, 동수역학의 수치적 적분에는 Smoothed Particle Hydrodynamics 기법을 채택하였다. 모의 결과 본 고에서의 수치모의가 기존에 선호되던 VOF, MAC의 수치 기법에 비해 우월한 결과를 보였다.

• 지질공학
• /
• 제26권2호
• /
• pp.207-221
• /
• 2016

최근 국내 필댐 및 저수지의 노후화가 급속도로 진행되고 있으며, 이에 따른 제체의 손상이나 붕괴사고가 잇따르고 있다. 그러나 필댐의 핵심적인 차수기능을 담당하는 코어층에 대한 열화와 잠재 위해성 분류에 대한 연구는 거의 미진한 실정이다. 본 연구에서는 노후화가 진행 중인 13개 기존 코어형 필댐에 대해(준공 후 경과년수 9-52년, 댐 높이 22-67 m), 무수보링에 의한 코어층 시추 지반조사와 표준관입시험, 2D 및 3D 전기비저항탐사, 물성·역학시험을 수행하여 공학적 기반의 잠재적 위해성 유형을 국내 최초로 분류, 제시하였다. 중심코어층에 대한 무수보링 시추 지반조사 결과, 코어재 잠재 위해성 유형을 국부적 포화대, 신속한 공내수 유입, 조립질 혼재 코어재, 상대적 저 강성의 네 종류로 분류하였다. 코어형 필댐의 잠재 위해성 유형 중국부적 포화대 유형은 코어존 내 유로의 성장 및 발달에 의한 내적침식의 가능성이 존재하므로 가장 위험한 위해성으로 분류 되었으며, 코어재의 열화 등급에 따라 적절한 차수능 회복을 위한 보수보강이 필요한 것으로 판단되었다. 그 외 세 가지 위해성 유형은 즉각적인 조치보다는 지속적인 모니터링과 정기 검사의 강화가 필요할 것으로 검토되었다. 본 연구대상 댐의 분석 결과, 준공 후 경과년수와 댐 코어재의 열화 양상과는 상관성이 크게 없는 것으로 나타났다. 본 연구 결과는 코어형 필댐의 노후화에 따른 댐의 안전관리와 성능개선에 있어 유용한 자료로 활용 가능할 것으로 판단된다.