• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2014년도 제49차 동계학술대회논문집 22권1호
• /
• pp.313-316
• /
• 2014

디지털 문화유산 콘텐츠는 실제 문화유산의 경험을 완벽하게 전달할 수는 없지만 디지털 기술의 특성을 이용하여 다양한 부가서비스를 포함함으로써 사용자들에게 재미를 부여하거나 사용자 경험을 극대화할 수 있다. 그런데 기존의 디지털 문화유산 콘텐츠는 대부분 특정 입력 장치에 한정된 사용자 인터랙션을 지원하거나 단일 사용자의 인터랙션에 국한된 경우가 많았다. 본 논문에서는 여러 사용자들이 다양한 종류의 여러 입력 장치를 사용한 인터랙션 정보를 동시에 받아서 다양한 디지털 문화유산 콘텐츠에서 적절하게 처리하여 사용될 수 있는 다중 사용자 입력 및 처리 프레임워크를 소개한다. 이 프레임워크는 서로 다른 입력장치로부터 입력정보를 일반화시켜서 해당 응용프로그램에 전달되어 협력적 인터랙션에 사용할 수 있게 한다.

• Journal of Power Electronics
• /
• 제13권6호
• /
• pp.1032-1041
• /
• 2013

This paper investigates control algorithms for a doubly fed induction generator with a back-to-back three-level neutral-point clamped voltage source converter in medium voltage wind power systems under unbalanced grid conditions. Three different control algorithms to compensate for unbalanced conditions have been investigated with respect to four performance factors; fault ride-through capability, instantaneous active power pulsation, harmonic distortions and torque pulsation. The control algorithm having a zero amplitude of torque ripple shows the most cost-effective performance concerning torque pulsation. The least active power pulsation is produced by the control algorithm that nullifies the oscillating component of the instantaneous stator active and reactive powers. A combination of these two control algorithms depending on the operating requirements and the depth of the grid unbalance presents the most optimized performance factors under generalized unbalanced operating conditions leading to high performance DFIG wind turbine systems.

• 한국안전학회지
• /
• 제29권6호
• /
• pp.132-136
• /
• 2014

Recently supporting policy of government for agricultural is changing from individual to workplace. For this reason, the number of industrial injury is increasing due to increase workplace in the agriculture. However, because the studies on the characteristics and causes of injury have not been performed, the effective measure for the prevention of industrial injury is difficult to establish. The aim of this study is to analyze the industrial injury characteristic and prepare the effective counterplan to prevent industrial injury of the workplace in the agriculture. This study analyzed 2,970 cases of industrial injury during the last five years (2008-2012) in the agriculture sector. The data was offered by Korean Occupational Safety and Health Agency. The results of analysis the industrial injury characteristic of the workplace in the agriculture, number of industrial injury for source of industrial injury was 12.3% in the outdoor floor and injury type was 23.1% in the fall. This study analyzed industrial injury characteristic which size and type of workplace, injury type and source of industrial injury through the case of industrial injury in agriculture. The result of this study will be helpful to identify the industrial injury characteristic in the agriculture and prepares the effective industrial injury prevention method.

• 한국의류산업학회지
• /
• 제17권3호
• /
• pp.364-371
• /
• 2015

This study investigated and analyzed Sadanggut for General Namyi, Agisee Gutdang in Haengdang-dong, Dodanggut in Bonghwa Mountainto examine the type and characteristics of official hats for shaman's costumes based on Seoul village gutas a spiritualistic shaman revealing the divinity of music for gutthrough singing, dancing, divine material and official hats. Commonly worn official hats were Goggal(conical hats), Jeonlip(soldier's felt hats), and Heuklip(black hats) for Seoul village gut as the object of thisstudy. Each official hat had a close relationship with subjects for divinity and musical meaning for gut. Julip(Red hats), Jokduri(bride's headpiece), helmets, Iksubgwan(King's official hat), and Daesu(Queen's a big wig with various hairpins) were also worn. Official hats worn for Seoul village gutwere understood to symbolize divinity and raise authority and dignity to the public through aggressive appearance, exaggeration and splendor. Concretely, official hats at Seoul village gut first had roles to materialize the divinity of each music of gut. Second, recognized as a part of performance or traditional culture in present day, aggressive official hats were favored to supply splendid attraction and maximize scenes of divined heroic epic poem in gut. Third, for Seoul village gut, colors and silhouettes of modern traditional costumes were reflected pursuing partial change and focused on exaggeration and splendor to express the mirth and festival of gutwhile maintaining traditional costumes.

• 한국지반환경공학회 논문집
• /
• 제10권7호
• /
• pp.33-41
• /
• 2009

지중전력선과 같은 원형 지하매설관의 경우 관의 하단부 다짐효율이 낮아 파손등과 같은 구조적 문제점에 항상 노출되어있다. 이러한 문제점들 때문에 다양한 방법들이 강구되어 왔으며 그중 하나가 유동성이 뛰어난 저강도 콘크리트의 개발이다. 외국에서는 이미 오래전부터 연구개발을 진행하여 전력회사를 중심으로 이미 실용화 단계에 와있다. 따라서 본 연구에서는 개발된 지중 전력케이블 유동성 뒷채움재의 거동특성을 확인하기 위해서 개발된 유동화 뒷채움재와 일반모래를 이용하여 DB-24차량하중에 대해서 매설관의 거동을 평가하기 위해서 실증실험을 수행하고 그 결과를 수치해석 및 이론식과 비교분석하였다. 그 결과 매설관의 변형은 뒷채움재의 종류에 영향을 받는 것으로 나타났다. 유동성 뒷채움재가 모래다짐 보다 관로에 미치는 토압 및 변형 특성이 우수한 것으로 확인되었다. 하지만, 실증실험 결과와 비교검토를 위해서 수행한 수치해석 및 이론식 값들이 실증실험값과 차이가나 향후 유동성 뒷채움재에 맞는 해석방법 개발이 필요할 것으로 판단된다.

• 대한토목학회논문집
• /
• 제34권3호
• /
• pp.805-812
• /
• 2014

본 연구에서는 하상변동의 고려가 물리서식처 모의에 미치는 영향을 검토하였다. 이를 위해 수리 및 이동상 계산은 CCHE2D 모형을 이용하였으며 서식처 적합도 곡선을 사용하여 서식처 평가를 실시하였다. 적용구간은 달천 유역 괴산댐 하류 수전교에서 대수보까지 약 2.5km 구간이며, 2006년 7월 홍수기 시 실측된 유량 및 수위자료를 이용하여 이동상 모의를 수행하였다. 수치모형의 검증은 실측된 수위와의 비교를 통해 수행되었으며 하상변동의 검증은 실시 하지 않았다. 물리서식처 분석은 우점종인 성어기 피라미를 대상으로 실시하였다. 고정상과 이동상 조건에서 각각 갈수량, 저수량, 평수량, 풍수량의 유랑조건에 대한 복합서식처 적합도 지수 분포를 모의하고 가중가용면적을 산정하였다. 모의 결과, 이동상 조건에서 모의구간의 상류 및 만곡부에서 복합 서식처 적합도지수가 상승하는 결과를 확인하였다. 또한 가중가용면적은 이동상 고려 시 5.4~11.3%정도 증가하는 것을 확인하였다.

• 대한인간공학회지
• /
• 제33권6호
• /
• pp.477-486
• /
• 2014

Objective:This study aims to devise industrial injury prevention measures by analyzing industrial injury characteristics including the status of industrial injuries, source of industrial injury and accident type in order to prevent aging workers' industrial injuries that account for more than half in the workplaces in agriculture. Background: Continuous migration from farm to city takes place among young people in rural areas in Korea, a traditionally agricultural country due to rapid industrialization and economic development. The aging rate in rural areas in 2013 was 37.3%, about three times higher than the total aging rate of 12.2% in Korea. According to industrial injury statistics of the Ministry of Employment and Labor, the number of industrial injuries in agriculture shows an uptrend and the industrial injuries of aging workers account for more than 50% each year. Method: Of the 2,970 industrial injury cases occurred in the workplaces in agriculture for five years during 2008 and 2012 offered by a national agency related to health and safety, this study analyzed 1,767 industrial injury cases of aging workers. Results: As a result of an analysis on aging workers' industrial injuries by company size in agriculture, 89.8% of the total number of industrial injuries were analyzed to occur in small scale company. According to aging workers' industrial injuries by source of industrial injury and accident type, the outdoor floor and a fall were analyzed to be the highest at 16.5% and 26.1%, respectively. Conclusion: This study analyzed aging workers' industrial injuries by company size, age, job duration, accident severity, gender, nationality, the source of industrial injury and accident type in order to identify industrial injury characteristics in agriculture. Application: The identification of industrial injury characteristics of aging workers in agriculture is judged to be helpful to devising effective measures to prevent industrial injuries.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.215-216
• /
• 2014

This paper proposes a control algorithm for permanent magnet synchronous generator with a back-to-back three-level neutral-point clamped voltage source converter in a medium-voltage offshore wind power system under unbalanced grid conditions. The proposed control algorithm particularly compensates for the unbalanced grid voltage at the point of common coupling in a collector bus of offshore wind power system. This control algorithm has been formulated based on the symmetrical components in positive and negative rotating synchronous reference frames under generalized unbalanced operating conditions. Instantaneous active and reactive power are described in terms of symmetrical components of measured grid input voltages and currents. Negative sequential component of ac input current is injected to the point of common coupling in the proposed control strategy. The amplitude of negative sequential component is calculated to minimize the negative sequential component of grid voltage under the limitation of current capability in a voltage source converter. The proposed control algorithm makes it possible to provide a balanced voltage at the point of common coupling resulting in the generated power of high quality from offshore wind power system under unbalanced network conditions.

• 한국전기전자재료학회논문지
• /
• 제31권4호
• /
• pp.216-220
• /
• 2018

The piezoelectric properties of $0.65Pb(Zr_{1-x}Ti_x)O_3-0.35Pb(Zn_{1/6}Ni_{1/6}Nb_{2/3})O_3$ ($PZT_x-PZNN$) ceramics with $0.530{\leq}x{\leq}0.555$ were investigated for application to piezoelectric energy harvesters. Although a morphotropic phase boundary (MPB) was found at approximately x = 0.545, the ceramic with the highest figure of merit (FOM) ($d_{33}{\times}g_{33}$) was observed at a composition of x = 0.540. Values of this figure of merit, $d_{33}{\times}g_{33}$, of $19.6pm^2/N$ and $20.2pm^2/N$ were obtained from $PZT_{0.540}-PZNN$ ceramics sintered at $920^{\circ}C$ and $950^{\circ}C$, respectively. A high output power of $937{\mu}W$ and a high power density of $3.3mW/cm^3$ were obtained from unimorph-type piezoelectric energy harvesters fabricated using $PZT_{0.540}-PZNN$ ceramic sintered at $920^{\circ}C$ for 4h.