• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.1
• /
• pp.51-57
• /
• 2023

Because of the global pollution caused by plastic disposal, demand for eco-friendly transformation in the packaging industry is increased. As part of that, the utilization of polylactic acid (PLA) as a food packaging material is increased. However, it is necessary to improve the crystallinity of PLA by adding nucleating agents or to improve the modulus by adding fillers because of the excessive brittleness of the PLA matrix. Thus, the cellulose nanofiber (CNF) was fabricated and dried to obtain a powder form and applied to the CNF/PLA nanocomposite. The effect of CNF on the morphological, thermal, rheological, and dynamic mechanical properties of the composite was analyzed. We can confirm the impregnated CNF particle in the PLA matrix through the field emission scanning electron microscope (FE-SEM). Differential scanning calorimetry (DSC) analysis showed that the crystallinity of not annealed CNF/PLA nanocomposite was increased approximately 2 and 4 times in the 1st and 2nd cycle, respectively, with the shift to lower temperature of cold crystallization temperature (T_cc) in the 2nd cycle. Moreover, the crystallinity of annealed CNF/PLA nanocomposite increased by 13.4%, and shifted T_cc was confirmed.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.6
• /
• pp.15-26
• /
• 2006

Although numerous investigations have been performed over the years to predict the behavior and bearing capacity of piles, the mechanisms are not yet entirely understood. The prediction of bearing capacity is a difficult task, because large numbers of factors affect the capacity and also have complex relationship one another. Therefore, it is extremely difficult to search the essential factors among many factors, which are related with ground condition, pile type, driving condition and others, and then appropriately consider complicated relationship among the searched factors. The present paper describes the application of Artificial Neural Network (ANN) in predicting the capacity including its components at the tip and along the shaft from dynamic load test of the driven piles. Firstly, the effect of each factor on the value of bearing capacity is investigated on the basis of sensitivity analysis using ANN modeling. Secondly, the authors use the design methodology composed of ANN and genetic algorithm (GA) to find optimal neural network model to predict the bearing capacity. The authors allow this methodology to find the appropriate combination of input parameters, the number of hidden units and the transfer structure among the input, the hidden and the out layers. The results of this study indicate that the neural network model serves as a reliable and simple predictive tool for the bearing capacity of driven piles.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.2
• /
• pp.209-217
• /
• 2022

Lane management with a central variable lane(s) (or reversible lane) where the traffic flow is temporarily reversed in one or more lanes during peak periods has been evaluated as an effective strategy to alleviate congestion caused by tidal traffic flows. However, due to traffic safety issues, such a movable barrier system can be considered as an alternative to supplement the existing its operation facilities such as static and/or dynamic signs and special pavement markings. In addition, when combined with a bus exclusive lane strategy, its effectiveness could be greatly increased. The objective of this study is to propose a feasibility analysis procedure for operational strategies of a bus-exclusive lanes using a barrier transfer system (BTS) for urban expressways. To this end, a case study was conducted on two urban expressways on the west side of the Han River in Seoul. As a result, temporary operation during rush hour in the morning was found to be most effective. The results presented in this study are expected to serve as a basis for establishing bus-exclusive lane operation strategies using similar systems in the future.

• Journal of the Korean Society of Floral Art and Design
• /
• no.41
• /
• pp.45-59
• /
• 2019

The characters that could be connected to diverse cultural contents have formed diverse platforms with the development of digital technology, and the size of the relevant industry and market is rapidly growing. Recently, the utilization of character emoticons for smartphone messenger has been rapidly increased, so that the characters are settled down as a tool for non-verbal communication, on top of drawing attention as an independent area. With the expansion of character market, the importance of design that could give interest and familiarity to consumers is more emphasized. The body proportion of characters includes the implicative and symbolic meanings that could express diverse personalities. Thus, this study examined the body proportion of the characters with the high consumers' preference, and then analyzed the characteristics of formative elements of character design in accordance with the body proportion. In the results of the analysis, the exaggerated form of SD characters in two or three-head figure, and the realistic Real characters in seven or eight-head figure were preferred. For the SD characters, the colors with a high chroma showing the cute and cheerful image were used. For the Real characters, the cubic effect was expressed through the colors with active images and the light and shade of color. Even though the SD characters have limited motions due to the omitted body parts, the facial movements of animation characters are exaggerated while the Real characters describe the realistic and dynamic motions.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.33 no.3
• /
• pp.499-510
• /
• 2023

Recently, an intelligent and advanced cyber attack attacks a computer network of a public institution using a file containing malicious code or leaks information, and the damage is increasing. Even in public institutions with various information protection systems, known attacks can be detected, but unknown dynamic and encryption attacks can be detected when existing signature-based or static analysis-based malware and ransomware file detection methods are used. vulnerable to The detection method proposed in this study extracts the detection result data of the system that can detect malicious code and ransomware among the information protection systems actually used by public institutions, derives various attributes by combining them, and uses a machine learning classification algorithm. Results are derived through experiments on how the derived properties are classified and which properties have a significant effect on the classification result and accuracy improvement. In the experimental results of this paper, although it is different for each algorithm when a specific attribute is included or not, the learning with a specific attribute shows an increase in accuracy, and later detects malicious code and ransomware files and abnormal behavior in the information protection system. It is expected that it can be used for property selection when creating algorithms.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.3
• /
• pp.155-163
• /
• 2023

Real-time monitoring technology is critical for ensuring the safety and reliability of nuclear power plant structures. However, the current seismic monitoring system has limited system identification capabilities such as modal parameter estimation. To obtain global behavior data and dynamic characteristics, multiple sensors must be optimally placed. Although several studies on optimal sensor placement have been conducted, they have primarily focused on civil and mechanical structures. Nuclear power plant structures require robust signals, even at low signal-to-noise ratios, and the robustness of each mode must be assessed separately. This is because the mode contributions of nuclear power plant containment buildings are concentrated in low-order modes. Therefore, this study proposes an optimal sensor placement methodology that can evaluate robustness against noise and the effects of each mode. Indicators, such as auto modal assurance criterion (MAC), cross MAC, and mode shape distribution by node were analyzed, and the suitability of the methodology was verified through numerical analysis.

• Knowledge Management Research
• /
• v.24 no.2
• /
• pp.65-85
• /
• 2023

This paper investigates how TMT's cognitive traits affect R&D investment. Drawing on the attention-based view, we propose that TMT's future orientation and risk preference increase the level of R&D investment. As R&D activities have long-term goal of generating proprietary knowledge, it is important to understand how TMT's attention toward future and risk affect R&D investment. Also, we test the moderating effect of CEO duality on R&D investment. As the CEO plays a leadership role in the TMT, if the CEO's decision-making authority is highly concentrated, the impact of TMT on R&D may decrease. We measure CEO duality and CEO ownership stake as CEO characteristics. Based on a sample of 837 U.S. manufacturing firms, the results show that when TMT has a higher tolerance for risk and higher future orientation, R&D intensity increases. However, when CEO also serves as chairman of board and CEO has higher ownership, TMT's influence on R&D investment weakens. This implies that TMT and CEO has power dynamic that can change based on CEO power supporting status. Overall, it suggests that TMT's attention and CEO power are important factors to improve longer-term knowledge accumulation of firm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.458-460
• /
• 2021

The provision and application of public safety network in Korea is still insufficient for security response to the mobile app of public safety network in the stages of development, initial construction, demonstration, and initial service. The available terminals on the Disaster Safety Network (PS-LTE) are open, Android-based, dedicated terminals that potentially have vulnerabilities that can be used for a variety of mobile malware, requiring preemptive responses similar to FirstNet Certified in U.S and Google's Google Play Protect. In this paper, before listing the application service app on the public safety network mobile app store, we construct a data set for malicious and normal apps, extract features, select the most effective AI model, perform static and dynamic analysis, and analyze Based on the result, if it is not a malicious app, it is suggested to list it in the App Store. As it becomes essential to provide a service that blocks malicious behavior app listing in advance, it is essential to provide authorized authentication to minimize the security blind spot of the public safety network, and to provide certified apps for disaster safety and application service support. The safety of the public safety network can be secured.

• Journal of Service Research and Studies
• /
• v.11 no.4
• /
• pp.21-42
• /
• 2021

This study was conducted to derive a Korean model that can permanently maintain and develop Korea. After analyzing Korean society, especially modern Korea, which was the foundation of the founding of the Republic of Korea, a Korean model that can lead Korean society as a sustainable society in human society was derived. The situation of Korea and Koreans was analyzed from a fundamental level. We analyzed the root causes of deepening division and conflict and vague concepts of freedom and justice, and presented a Korean model of the Republic of Korea based on the founding ideology and constitutional spirit of the Republic of Korea to solve these problems. The necessary conditions for being a Korean were derived from the founding ideology and constitutional spirit of the Republic of Korea, the indigenous ideology of Korea, and the fashion and lifestyle of Koreans, derived. In addition, basic axioms for the Korean model were presented, and the structure of the Korean model was designed based on this. The Korean model is presented so that Korean society can lead the human society and be happy for a long time. Reflecting the results of in-depth analysis of the ideological foundations of modern Koreans, a new long-term sustainable structure for Koreans with various ideologies to live well together was proposed. The new Korean model was named the service-oriented Korean model. This is because it is a model centered on thorough checks and balances between all opponents, because it is a multidimensional dynamic Korean model rather than a simple linear one-dimensional Korean model, and because it is a Hwajaengtaeguk model that accurately expresses the identity of Koreans. It was proposed as a model for the sustainable development of Korean society. A follow-up study on specific Korean education programs is needed in the future.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1C
• /
• pp.63-74
• /
• 2008

Site response analyses were performed based on equivalent linear technique using the local geologic and dynamic site characteristics, which include soil profiles, shear wave velocity profiles and depth to bedrock for 125 sites collected in Korean Peninsula. From the results of site response analyses, 2-parameters site classification system based on the combination of mean shear wave velocity of soil and depth to bedrock was newly recommended for regions of shallow bedrock depth in Korea. First, as the borders of bedrock depth (H) for site classification were determined as 10m and 20m, the soil sites were divided into 3 classes as $H_1$, $H_2$ and $H_3$ sites. And then, the 3 site classes were subdivided into 7 classes based on the mean shear wave velocity of soil ($V_{s,soil}$). The feasibility of new site classification system was verified and the representative site coefficients ($F_a$ and $F_v$) and design response spectrum were suggested by analyzing uniform trend and dispersion of site coefficients for each site class. The suggested site coefficients and the regression curves present the nonlinear characteristics of soils according to the change of rock outcrop acceleration with uniform trend effectively. From the comparison between the mean values of response spectrum which was acquired from the site response analysis and the suggested design response spectrum, there was a little difference in some of site classes and it was verified to adjust the integration interval to make it more suitable for the site condition in Korea.