• Spatial Information Research
• /
• 제12권2호
• /
• pp.151-163
• /
• 2004

연구는 KOSDIC(Korea Standard of Drawing Information in Construction)과 GIS데이터의 효율적인 연계를 위한 도면 교환 포맷 표준개발에 관한 것으로 CAD도면을 매개로 한 KOSDIC과 GIS데이터의 연계 방안에 관한 것이다 제1차 NGIS사업의 일환으로 전국 수치지도가 CAD데이터로 구축되었고, 개발된 수치지도를 이용하여 지자체를 중심으로 GIS사업이 활발히 추진되면서, UIS, LIS, EIS, AM/FM 등 각종 분야와 지리정보 시스템(geographic information science)이 연계되고 있다. 이러한 추세에서 지리정보시스템은 공간정보를 기반으로 여러분야에 걸쳐 활발히 구축되고 있으며, 여러 시스템들과의 연계에서 데이터 교환의 표준화가 중요하게 부각되고 있다. 그러나 GIS의 수치지도는 CAD도면의 지형도로 만들어져 있어 GIS포맷으로 변환(DWG→DXF→SHP)하여 공간자료로 활용될때 변환과정에서 오류나 문제점이 많이 발생하여 변환 성공률이 높지 못한 문제점을 가지고 있다. 또한, 객체기반으로 생성되는 CAD도면의 사상들은 Point와 Line feature로 이루어져 있기 때문에 Point, Line, Polygon feature를 요소로 하는 GIS시스템에서 Polygon feature의 변환이 불가능하여 데이터의 통합과 표준화에 가장 큰 장애로 대두되고 있다. 따라서, 본 연구에서는 CAD도면을 GIS포맷으로 변환시킬때 발생하는 문제점을 해소하기 위한 방안을 모색해보고자 한다. 이는 향후 KOSDIC과 GIS간의 효율적인 데이터 연계방안 뿐만 아니라 여러 데이터간의 표준화 연구에 많은 도움이 될 것이다.

• 제어로봇시스템학회논문지
• /
• 제11권9호
• /
• pp.768-773
• /
• 2005

A new approach for human foot modelling and last design based on the cross sectional method is presented in this paper. The proposed last design method utilizes the dynamic trimmed parametric patches for the foot 3D data and last 3D data. The cross section a surface of 3D foot for the 3D last, design modeling of free form geometric last shapes. The proposed last design scheme wraps the 3D last data surrounding the measured 3D foot data with the effect of deforming the last design rule The last design rule of the FFD is constructed on the FFD lattice based on foot-last shape analysis. In addition, the control points of FFD lattice are constructed with cross sectional data interpolation methods from the a finite set of 3D foot data. The deformed 3D last result obtained from the proposed FFD is saved as a 3D dxf foot data. The experimental results demonstrate that the last designed with the proposed scheme has good performance.

• 한국해양공학회지
• /
• 제11권2호
• /
• pp.145-153
• /
• 1997

This paper constructs a data base to create the Hull lines prior to piece manufacture and nesting steps with a personal computer using the data of created as the advanced software, TRIBON. The lines are plotted smoohtly, which are called the spline. The S/W is excellentlt estimated on the ptrcision among shipping exclusive S/W, which are currentlyused So, the S/W is mainly used as as shipping CAD program. High-cost H/W and high-performance S/W(TRIBON etc.) sre used with the bases of technique and capital power in the big shipbuilding yard; but small but small and medium-sized shipbuilding yard and related companycan't purchase dueto the high-cost product. To bring upthe small and medium sized shipbuilding yard lacking little competitive power, the data base S/W is joined with the CADRA of graphic S/W and is developed to create the Hull lines to be needed on as automatic cutting process usiing the personal computer.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권2호
• /
• pp.38-47
• /
• 2001

This paper decribes the development of computer-aided design of a very precise progressice die for lead frame of semiconductor chip. The approach to the system is based on knowledgr-based rules. Knowledge of fie이 experts. This system has been written in AutoLISP using AutoCAD ona personal computer and the I-DEAS drafting programming Language on the I-DEAS mater series drafting with on HP9000/715(64) workstation. Data exchange between AutoCAD and I-DEAS master series drafting is accomplished using DXF(drawing exchange format) and IGES(initial graphics exchange specification) files. This system is composed of six main modules, which are input and shape treatment, production feasibility check, strip layout, data conversion, die layout, and post processing modules. Based on Knowledge-based rules, the system considers several factors, such as V-notches, dimple, pad chamfer, spank, cavity punch, camber, coined area, cross bow, material and thickness of product, complexities of blank geometry and punch profiles, specifications of available presses, and the availability of standard parts. As forming processes and the die design system using 2D geometry recognition are integrated with the technology of process planning, die design, and CAE analysis, the standardization of die part for lead frames requiting a high precision process is possible. The die layout drawing generated by the die layout module s displayed in graphic form. The developed system makes it possible to design and manufacture lead frame of a semiconductor more efficiently.

• 한국정밀공학회지
• /
• 제21권4호
• /
• pp.88-94
• /
• 2004

Recently, vehicle simulators are widely used to evaluate driver's responses and driver assistance systems. It needs much effort to construct the virtual driving environment for a vehicle simulator. In this study, it is described how to make effectively the roads and the driving environment for a vehicle simulator. The GIS (Geographic Information System) is used to construct the roads and the environment effectively. Because the GIS is the integrated system of geographical data, it contains useful data to make virtual driving environment. First, the outline and centerline of roads is abstracted from the GIS. From the road outline, the road width is calculated. Using the centerline, the grid model of roads is constructed. The final graphic model of roads is constructed by mapping road image to the grid model according to the number of lanes and the kind of surface. Data of buildings from the GIS are abstracted. Each shape and height of buildings is determined according to kind of buildings, the final graphic model of buildings is constructed. Then, the graphic model of roadside tree is also constructed. Finally, the driving environment for driving simulator is constructed by converting the three graphic models with the graphic format of Direct-X and by joining the three graphic models.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 춘계학술대회 논문집
• /
• pp.71-76
• /
• 2001

This paper describes a research work of developing system for conceptual die design system for Fine blanking. The method of approaching to the system is based on the knowledge-based rules. Knowledge for the system is formulated from experimental results and the empirical knowledge of field experts. This system has been written in VisualLISP on the AutoCAD using a personal computer and in Microsoft Visual Basic ver.6.0. Transference of data is accomplished by DXF (Drawing Exchange Format) method. This system consists of six modules, which are cognition of a drawing, cognition of shear length, calculation of shear force, materials properties database, determination of degree of difficulty of the product, determination of approximate life of punch and die modules. Results carried out in each module will provide efficiency to the designer and the manufacturer of die for Fine blanking. But the main focus of this system is the design of die for Fine blanking in the level of general concept. In order to use powerful tool in this field, developed system will be studied continuously.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2005년도 추계학술발표대회 및 정기총회
• /
• pp.509-512
• /
• 2005

기존의 GIS 서비스는 웹상에서 제공되어 왔으나 최근 모바일 기술의 발달로 인해 모바일 단말기에서의 서비스가 가능해졌다. 하지만 모바일 단말기의 초대 장점인 휴대성에 초점이 맞춰지면서 데이터 처리 및 저장 공간의 부족, 통신 속도의 문제에 부딪히게 되었다. 또한 GIS 서비스를 위한 지리정보 표준이 없기 대문에 각 회사마다 서로 다른 형태들로 개발되어 왔으며 특정 포맷에 국한되어 자유로운 활용과 통합 및 응용이 불가하며, 각각의 데이터들을 공유하는데 많은 어려움이 있었다. 본 논문에서는 기존 지리정보포맷인 DXF(Drawing eXchange Format), SHP(SHaPefile)등을 모바일 환경에 적합하게 지리 정보를 표현함에 있어서 필요한 최소한의 속성들을 추출 및 인덱싱을 통해 경량화된 통합 DB를 구축하여 추후 OGC(Open GIS Consortium)에서 제안한 XML 기반의 표준 공간 데이터 포맷인 GML(Geographic Markup Language)로의 확장이 용이하고 좀 더 효율적인 데이터 처리 및 관리를 가능하게 한다.

• 한국정밀공학회지
• /
• 제16권6호
• /
• pp.123-132
• /
• 1999

This paper describes a research work of developing computer-aided design of lead frame, semiconductor, with blanking operation which is very precise for progressive working. Approach to the system is based on the knowledge-based rules. Knowledge for the system is formulated from pasticity theories, experimental results and the empirical knowledge of field experts. This system has been written in AutoLISP on the AutoCAD using a personal computer and in I-DEAS Drafting Programming Language on the I-DEAS Master Series Drafting with Workstation, HP9000/715(64). Transference of data between AutoCAD and I-DEAS Master Series Drafting is accomplished by DXF(drawing exchange format) and IGES(initial graphics exchange specification) methods. This system is composed of five modules, which are input and shape treatment, production feasibility check, strip-layout, data-conversion and die-layout modules. The process planning and Die design system is designed by considering several factors, such as complexities of blank geometry, punch profiles, and the availability of a press equipment and standard parts. This system provides its efficiecy for strip-layout, and die design for lead frame, semiconductor.

• 한국측량학회지
• /
• 제18권4호
• /
• pp.325-333
• /
• 2000

일반적으로 도로종합관리 체계를 위해 이용되는 도면은 스캐너로 받아들인 도면으로 이는 도면보존 상태라든가 스캐너의 해상도에 따라 원 도면의 선명도가 결정되고 도면에 따른 데이터가 따로 첨부되어 관리되는 단점을 가지고 있다. 이에 본 연구에서는 도로설계전용 프로그램인 RP(Road Project 2.1)를 이용해 지방도 일부 구간의 도로평면선형과 종단선형을 설계하고 완성된 도면자료는 *.dxf형태로, 그에 대한 속성자료는 ＊.dbf형태로 직접 저장하여 PC ArcView프로그램과 Excel을 이용해 도면과 데이터를 일괄적으로 관리 할 수 있는 실시간 도로선형정보 체계를 구축하였고, 유사한 도로설계시 도면과 데이터를 일괄적으로 쉽게 검색 할 수 있어 예비설계의 기초자료로 활용할 수 있을 것으로 판단된다.

• Journal of the Korean Statistical Society
• /
• 제32권3호
• /
• pp.311-311
• /
• 2003

This paper contains the following errors. 1. "$I_{\{x>D\}}{\lambda}dt_{p0}(t)s(x)$" should be added to the right hand side of (2.3). 2. "$I_{\{x>D\}}{\lambda}_{p0}(t)s(x)$" should be added to the right hand side of (2.6). 3. "$I_{\{x>D\}}{\lambda}_{p0}s(x)$" should be added to the right hand side of (2.9). 4. In Theorem 2.3 and its proof, "${\lambda}{\int}_{0}^{D}f(y)s(x-y)dy$" appears three times (including one in (2.20)). To each of these, "${\lambda}_{po}s(x)$" should be added. 5. In Remark 2.5, "${\lambda}dt_{p0}/s(x)dx" should be added to "${\int}_{0}^{D}{\lambda}dt\;s(x-y)dxf(y)dy$". As a result of these corrections, a simpler proof of Theorem 2.3 becomes available. Substituting (2.18), (2.21), (2.22) into the left hand side of (2.20) and comparing the result with (2.10), we have the right hand side of (2.20).