• Journal of the Korean Wood Science and Technology
• /
• v.45 no.3
• /
• pp.258-267
• /
• 2017

In this study, pitch pine (Pinus rigida, PIR) and Mongolian oak (Quercus mongolica, QUM) pellets were fabricated with bark or/and drying waste liquor (DWL) of larch (Larix kaempferi, LAK) as an additive. Based on the results of fuel characteristics of the pellets, optimal conditions for producing the high-quality pellets were provided. In the analysis of chemical composition, bark contained holocelluose and lignin of 90% and over. DWL had 0.1% solid assumed to sugars which are generated from the oven-drying of LAK logs. QUM showed high ash content (2.2%) by containing of bark in the sawdust. Bark and DWL of LAK had high ash content of 4% and over. Calorific values of all specimens and additives were higher than that of the $1^{st}$-grade standard of wood pellets designated by NIFOS (18.0 MJ/kg). PIR and QUM pellets were fabricated with additive of 2 wt% based on the solid weight of oven-dried sawdust using a piston-type flat-die pelletizer, and thus ash content and calorific value of the pellets did not affect by the use of additive. Durability of the pellets increased with the use of additive. Durabilties of pellets, which were fabricated with bark as an additive and DWL as a controller of moisture content for sawdust, did not differ from those of pellets without additives and were lower than those of pellets either with bark or DWL. However, use of both bark and DWL for the production of wood pellets might be favorable because it can make a profit from the collection process of DWL. Based on the results of fuel characteristics of the pellets, QUM and PIR pellets were produced by a flat-die pelletizer. Moisture content (MC), bulk density and durability of the pellets improved with the use of additive. Particularly, sawdust MC of 10% and the addition of bark or DWL for PIR as well as sawdust MC of 12% and the addition of bark for QUM might be optimal conditions for the production of high-quality pellets. Except for the ash content of QUM pellets, other properties of PIR and QUM pellets exceeded the $1^{st}$-grade wood pellets standards of NIFOS.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.44-44
• /
• 2007

New inchworm type piezoelectric actuator design, which can reduce the number of the piezoelectric body for manufacturing inchworm type actuator, is suggested in this work. Inchworm type actuator consists of three or more piezoelectric bodies, on the other hand the new-designed inchworm type actuator has only one piezoelectric body. The one piezoelectric body that size is $2\;{\times}\;2\;{\times}\;4\;[mm^2]$ (DWL) has 2 clamping part and 1 extending part. The size of the new-designed actuator with one piezoelectric body is $5\;{\times}\;6\;{\times}\;9\;[mm^2]$ (DWL). The new-designed inchworm type actuator performed the operation at a cycle (6 steps) of $0.3{\mu}m$ per $33.3{\mu}s$ and a generated force of 0.6N.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.2
• /
• pp.195-202
• /
• 2018

The defects that are bound to arise in most construction projects cause disputes among the contracting parties regarding the defect warranty liability (DWL)guaranteed by the retention of the contractor's performance security at the end of the performance period of the contract. Most current projects involve a multiple-tier contractual relationship, causing the liability for some defects to overlap. In addition, many construction projects are made up of multiple detailed work types which an expert hired by the owner inspects the part completed by the contractor and pays an interim payment. However, after the completion of work, the contractor will still hold the defect warranty liability. In a scenario in which the work is delayed due to reasons for which the owner is responsible, the defect warranty liability period is also increased, imposing an additional burden on the contractor. In this study, basic research was carried out with the goal of reducing problems related to defect warranty liability Problems related to defect warranty liability cases and the nature of the defect warranty liability period were investigated. Possible solutions to the problems caused by the DWL that were suggested include the separation of the negligence liability period and the strict liability period, as well as the introduction of a retention money system.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.8
• /
• pp.685-690
• /
• 2007

The new design of inchworm-type piezoelectric actuator is presented in this paper, Compared to conventional inchworm-type actuators, which are composed of more than three piezoelectric bodies, we can reduce the number of piezoelectric bodies by employing the proposed design, resulting in only one piezoelectric body. The overall size of the proposed actuator which consists of one piezoelectric body, two clamping parts and one extending part, is only $5{\times}6{\times}9 [mm^3]$ (DWL). The actuating characteristics of fabricated Monolithic Inchworm Type Actuator(MITA), were found to be a displacement of $0.3{\mu}m$, a generating force of 0.6N and an electric power of 0.5W.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.43 no.4
• /
• pp.37-49
• /
• 2001

This study was performed in order to produce the basic data for developing prediction techniques of desalinization to be applicable to reclaimed tidal lands at the beginning stage. the desalinization experiments were carried out by two water management practices, namely, the leaching method by subsurface drainage and the rinsing method by surface drainage. The 5 soil samples used in this study were collected in 4 tidal land reclamation projects. Regression equations were obtained in order to investigate the changes of electrical conductivity during the desalinization of reclaimed tidal lands and to estimate water requirements for desalinization. The results obtained from this study were summarized as follows: 1. According to USDA Salinity Laboratory classification system of salt affected soils the reclaimed tidal land soils used in this study were saline-sodic soils with the high electrical conductivity and the high exchangeable sodium percentage. 2. With the increase of the water requirements for desalinization the electrical conductivity was decreased with high degree of correlationships and the desalinization effects were remakable in both the leaching method and the rinsing method. 3. In case of the leaching method the electrical conductivity had been reduced below the classification value of salt affected soils when the depth o water leached per unit depth of soil (Dwl/Ds) was 0.3 and the desalinization effects showed a tendency to be much the same in each treatment.

• Journal of the Optical Society of Korea
• /
• v.14 no.3
• /
• pp.199-203
• /
• 2010

A mobile direct detection Doppler LIDAR based on molecular backscattering for measurement of wind in the stratosphere has been developed in Hefei, China. First, the principle of wind measurement with direct detection Doppler LIDAR is presented. Then the configuration of the LIDAR system is described. Finally, the primary experimental results are provided and analyzed. The results indicate that the detection range of the designed Doppler LIDAR reached 50 km altitude, and there is good consistency between the molecular Doppler wind LIDAR(DWL) and the wind profile radar(WPR) in the low troposphere.

• Electronics and Telecommunications Trends
• /
• v.34 no.3
• /
• pp.75-85
• /
• 2019

The bandwidth of wireless communication is expected to grow exponentially due to the expansion of mobile devices and the increase of real-time and realistic multimedia services. Recently, the studies on terahertz band wireless communication have been actively conducted for the next generation communication after 5G wireless communication. The terahertz band, which is the unallocated frequency band, has been applied to the non-contact, non-destructive quality inspection industry such as the terahertz imaging and spectral systems through the development of terahertz generating and detecting components. This article briefly describes recent research trends on terahertz wireless communication technologies and introduces the details of photonics-based terahertz devices and systems that have been focused on the Terahertz Basic Research Section of Electronics and Telecommunication Research Institute.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.272-273
• /
• 2013

Some living thingsuse micro- or nano- structures for living in nature. Scientists and engineers made efforts to mimic them, and they succeeded in making new types of applications. They used 'Namib desert beetle' to self-filling device by moisture harvesting and 'lotus leaf' to self-cleaning device by water repelling. 'Namib desert beetle' and lotus leaf have micro-patterns on their surface, which consists of hydrophobic or hydrophilic materials [1]. Moreover, micro-patterns on the surface make self-filling or self-cleaning property enhanced because of the surface roughness. Surface roughness enhances wettability [2]. Micro-pattern is a significant factor to make the surface be functional, so we want to make new types of functional surface by micro-patterning. In this work,we make several functional micro-patterns (radial, line, and dot arrays) using maskless lithography and analyze the characteristics of each micro-pattern. In order to analyze and understand surface characteristics, micro-patterns with varying sizes are investigated. All experiments are proceeded on mr-DWL5 photo resists coated on silicon wafers in same condition. All the experiments have demonstrated good performances about hydrophobic or hydrophilic property corresponding to their material and structural combinations. In radial micro-pattern, although the surface is flat, water drops on hydrophilic radial pattern can be convergent to a middle point and water drops on hydrophobic radial pattern can be divergent from the middle point. In line array micro-pattern, water drops can roll off along only one direction in parallel with the line arrays. Such phenomena might be mainly caused by the local change of surface roughness. From these results, controlling the movement and direction of water drops is made feasible without introducing a slope, which can potentially be used for new types of applications.

• Journal of Acupuncture Research
• /
• v.18 no.6
• /
• pp.105-113
• /
• 2001

Objective : This study was performed to evaluate the effect of acupuncture on cerebral blood flow by Transcranial Doppler Ultrasonography(TCD) Method : Monitoring of TCD was examined in 11 healthy women volunteer(mean $age:\;24.5{\pm}2.9\;\;years$) before, during and after acupuncture on Paekoe(GV20). Mean velocity, pulsatility index, systolic velocity and diastolic velocity values are analyzed from DWL. MDX4 at different depths of both middle cerebral artery. Results : The results showed a significant(p<0.05; Friedman test & Wilcoxon signed ranks test) increase in mean velocity, systolic velocity and diastolic velocity decrease in pulsatility index, which was measured at different depths of both middle cerebral artery. Conclusion : These results suggest that acupuncture could have a specific effect on cerebral blood flow.

• Journal of Soil and Groundwater Environment
• /
• v.8 no.1
• /
• pp.57-67
• /
• 2003

Nitrate contamination by human activities is a serious problem to water-supply in agricultural area. Shallow groundwater is the main source of water-supply, but it is very sensitive to contamination. Study area for nitrate contamination is a region of Iljuk, Kyunggi where is an agricultural area having many livestock facilities in various scales. As a result, the points having availability of incoming of external contaminant are 77%, and the ones over the Drinking Water Limit (DWL) are 32～42%. For a nitrogen isotope analysis, all the points having availability of incoming of external contaminant have $\delta$$^{15}$ N-NO$_3$ values over 5$\textperthousand$, and the points of 59% are strongly affected by nitrogen originated from animal wastes. The major source of nitrate in this area is intensive livestock facilities. Even though a livestock facility had enclosed, it affects groundwater quality for a long time. The chemical property of contaminant source is various according to animal species in surface water, but not in groundwater since some solutes are removed by reactions during an inflow to subsurface.