• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.2
• /
• pp.62-67
• /
• 2011

In this paper, Multi Mode Receiver Module is designed in one H/W module for Multi-mode Digital Broadcasting. Multi mode means Digital TV, Mobile TV and Digital Radio on the Broadcasting. and T-DMB, DAB(+), ISDB-T and DVB-T standard. Our Module can receive various broadcasting signal such as ISDB-T, DVB-T and DAB. The Multi mode Receiver Module & demuxer was implemented using the one SoC Chip has good performances to receive the multi mode signals as well as standard interface such as SPI, to connect the main CPU Unit.

• Membrane Journal
• /
• v.20 no.2
• /
• pp.142-150
• /
• 2010

A series of anion exchange composite membranes were prepared and characterized for electrodialysis processes used in the removal of nitrate nitrogen and ions in groundwater. The membranes were prepared as follows; first, fabric substrates were fully impregnated with monomer mixtures of vinylbenzylchloride (VBC), divinylbenzene (DVB), Styrene (ST) and $\alpha,\alpha$-Azobis(isobutyronitrile) (AIBN). Second, they were thermally polymerized to yield crosslinked poly (VBCST- DVB)/fabric composite membranes. Finally, the membranes were treated with trimethylamine (TMA) / acetone to give $-N^+(CH_3)_3^-$-containing poly(VBC-ST-DVB)/fabric membranes. The basic membrane properties such as ion exchange capacity (IEC), electric resistance and water content of the resulting membranes were measured as a function of VBC/DVB and TMA/Acetone content. As a result, the composite membranes showed lower electric resistance and higher IEC than commercial anion exchange membranes (AMX, Astom). Electrodialysis tests using the prepared membranes were carried out for the removal of various ions such as $NaNO_3$, $MgSO_4$ and NaF for 60 minutes. The results showed that the ions were removed below 1 mg/L within about 15 minutes which indicates that the anion exchange membranes prepared here could be applied to the electrodialysis process. as can be seen in the following that the ion conductivity values were almost no change after 15 minutes electrodialysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.2A
• /
• pp.172-178
• /
• 2011

In this paper, the performance of bit interleaved of coded and modulation(BICM) module of the second generation of digital terrestrial television broadcasting system(DVB-T2) is evaluated with the help of computer simulation. The frame error rate performance is studied in AWGN, Rayleigh fading and 15% erasure channels. In addition, iterative receiver is considered that exchanges extrinsic information between the rotated demapper and the LDPC decoder. Through the simulation it is observed that under the flat fading Rayleigh channel, about 1.2dB gain at FER of $10^{-4}$ is introduced when rotated constellation and iterative demapping and decoding are employed. Under the 15% earasure channel, rotated constellation gives performance gain of about 5dB at BER of $10^{-4}$ and when IDD is applied, additional performance gain of about 3dB can be achieved.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.8
• /
• pp.56-63
• /
• 2010

This work proposes a 12b 100MS/s 0.13um CMOS pipeline ADC for battery-powered mobile video applications such as DVB-Handheld (DVB-H), DVB-Terrestrial (DVB-T), Satellite DMB (SDMB), and Terrestrial DMB (TDMB) requiring high resolution, low power, and small size at high speed. The proposed ADC employs a three-step pipeline architecture to optimize power consumption and chip area at the target resolution and sampling rate. A single shared and switched op-amp for two MDACs removes a memory effect and a switching time delay, resulting in a fast signal settling. A two-step reference selection scheme for the last-stage 6b FLASH ADC reduces power consumption and chip area by 50%. The prototype ADC in a 0.13um 1P7M CMOS technology demonstrates a measured DNL and INL within 0.40LSB and 1.79LSB, respectively. The ADC shows a maximum SNDR of 60.0dB and a maximum SFDR of 72.4dB at 100MS/s, respectively. The ADC with an active die area of 0.92 $mm^2$ consumes 24mW at 1.0V and 100MS/s. The FOM, power/($f_s{\times}2^{ENOB}$), of 0.29pJ/conv. is the lowest of ever reported 12b 100MS/s ADCs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.275-282
• /
• 2021

High-molecular-weight maleic anhydride-grafted polylactic acids (HMMA-g-PLA) compatibilizers were prepared by melt grafting in a twin screw extruder using di(tert-butyl-perxoyisopropyl)benzene (PK-14; as initiator), maleic anhydride (MA), and divinylbenzene (DVB). To determine the properties of the prepared HMMA-g-PLA compatibilizers, Fourier transform infrared (FTIR), Melt index (MI), and back-titration analyses were performed. On increasing DVB concentration, grafting yield of HMMA-g-PLA increased but MI decreased because 𝛽-scission of PLA was restrained by the DVB, and thus, the molecular weight of HMMA-g-PLA increased. PLA-based wood-plastic composites (WPCs) were prepared using HMMA-g-PLA by melt blending through a single screw extruder. The flexural and impact strengths of WPCs compatibilized with HMMA-g-PLA were greater than those of WPCs produced without HMMA-g-PLA. Scanning electron microscope (SEM) studies indicated that increased mechanical properties were caused by excellent interfacial adhesion between PLA and wood fibers due to the addition of HMMA-g-PLA. However, rather high contents of HMMA-g-PLA reduced the mechanical properties of WPCs. We believe that lower molecular-weight of HMMA-g-PLA added as an compatibilizer, compared with PLA polymer, caused the reduction of mechanical properties.

• Membrane Journal
• /
• v.33 no.2
• /
• pp.77-86
• /
• 2023

In this study, pore-filled ion exchange membranes with low membrane resistance and high hydroxide ion conductivity was developed. To improve alkali durability, a porous substrate made of polytetrafluoroethylene was used, and a copolymer was prepared using monomers 2-(dimethyl amino) ethyl methacrylate (DMAEMA) and vinyl benzyl chloride (VBC) for pores. divinyl benzene (DVB) was used as the cross-linker, and ion exchange membranes were prepared for each cross-linking agent content to study the effect of the cross-linker content on DMAEMA-DVB and VBC-DMAEMA-DVB copolymers. As a result, chemical stability is improved by using a PTFE material substrate, and productivity can be increased by enabling fast photo polymerization at a low temperature by using a low-pressure UV lamp. To confirm the physical and chemical stability of the ion exchange membrane required for an anion exchange membrane fuel cell, tensile strength, and alkali resistance tests were conducted. As a result, as the cross-linking degree increased, the tensile strength increased by approximately 40 MPa, and finally, through the silver conductivity and alkali resistance tests, it was confirmed that the alkaline stability increased as the cross-linking agent increased.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.11b
• /
• pp.446-450
• /
• 2002

아날로그 방송에서 디지털 방송으로의 전환은 흑백 TV에서 칼라 TV로의 전환보다 더욱 혁신적인 변화이다. 이러한 디지털 방송 기술의 핵심이 되고 있는 것이 바로 서비스정보(Sl : Service Information)이다. 본 논문에서는 국내 위성방송 표준인 유럽방식의 디지털 방송(DVB : Digital Video Broadcasting)에 대한 서비스정보 수신기의 효과적인 구조 및 구현 방법을 제시한다.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2006.07a
• /
• pp.526-526
• /
• 2006

• Broadcasting and Media Magazine
• /
• v.8 no.1
• /
• pp.70-77
• /
• 2003

DVB-T, DVB-S, 지상파 DAB, 위성 DAB 등 디지털 방송기술에 대하야 학계 및 산업계의 관심이 모아지고 있으며, 이동수수니 시 고품질의 디지털 멀티미디어 서비스를 제공하기 위한 많은 연구들이 진행되고 있다. 본 고는 이러한 여러 분야의 디지털 방송기술 중 국내에서 상용 서비스 제공을 목표로 추진중인 위성 DAB 시스템의 Digital System E에 대한 전반적인 시스템 구조와 시험시스템을 이용한 필드테스트 결과를 기술하고자 한다.

• Electronics and Telecommunications Trends
• /
• v.23 no.3
• /
• pp.130-137
• /
• 2008

최근 위성방송 기술은 고선명/고음질을 실현하고, 다양한 부가서비스를 제공하는 고품질의 디지털 전송방식으로 변화하고 있다. 이러한 위성방송의 수요확대에 다채널 데이터 전송 및 HD급 고품질의 영상을 전송할 수 있는 DVB-S2 시스템 개발에 한창이다. 본 논문에서는 DVB-S2 전송방식을 적용하기 위한 Ku-Ka 대역의 강우감쇠 등을 효과적으로 보상하여 보다 나은 위성방송 수신 가용도를 높이기 위한 방안에 대해 논한다.