• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.220-220
• /
• 2003

최근, Cu기판 위에 YBaCuO$_{7-x}$ 초전도체를 입혀 초전도 선재를 제작하려는 연구가 이루어지고 있으며 이 과정에서 CuO와 Cu$_2$O가 생성된다는 보고가 있다. CuO 및 Cu$_2$O의 생성은 초전도 선재의 전기전도적 특성 및 기계적 특성에 상당한 영향을 끼칠 수 있다. 따라서 CuO와 Cu$_2$O에 대한 연구가 필요하다고 할 수 있다. 본 연구에서는 DV-X$\alpha$ 분자궤도법을 통해 CuO와 Cu$_2$O에 대한 (Cu$_{29}$ O$_{58}$ )$^{58-}$ , (Cu$_{52}$ O$_{19}$ )$^{14+}$ 모델을 이용하여 전자상태계산을 하였다. CuO, Cu$_2$O의 valence orbital level 구조 및 DOS (Density of State)를 통해 Cu원자와 O원자간의 공유결합 세기를 측정하였으며 CuO, Cu$_2$O 서로간의 차이점을 분석하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2001.10b
• /
• pp.1513-1516
• /
• 2001

본 논문은 기가비트 네트워크 테스트베드인 JGN상에서 대표적인 스트림형 트래픽인 DV와 MPEG2에 대한 전송 품질의 주관적 평가를 통하여 전송지연과 패킷 손실에 따른 영향이 최종 사용자에게 어떤 영향을 미치는 지를 조사한 것이다. 스트림형 데이터에 대해 음질 측정은 ITU-R BS.1116-1을 기반으로 하고 화질 측정은 ITU-R BT.500-1 을 기반으로 하여 측정하였다, 또한 최종 사용자의 주관적 평가를 얻기 위한 방법으로는 DSCQS 5 단계 평가 방법을 채택하였다. 그 결과 MPEG2 스트림의 경우 네트워크 트래픽 파라미터가 급증하는 54%의 부하율에서 화질과 음질의 평가 등급이 급격히 하강한다는 것을 알 수 있었고 DV의 경우 화질은 MPEG2 와 마찬가지로 54%의 부하율에서 평가 등급이 감소하기 시작하였으나 그 변화정도가 MPEG2 에 비하여 완만한 변화를 보였다. DV 음질의 경우 트래픽 파라미터(RTT, 패킷 손실)와는 큰 연관성을 보이지 않았고 대부분의 측정자들이 보통 수준의 평가등급을 보였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.218-221
• /
• 2004

The electronic state of ZnO doped with Al, Ga and In, which belong to III family elements in periodic table, was calculated using the density functional theory. In this study, the program used for the calculation on theoretical structures of ZnO and doped ZnO was Vienna Ab-initio Simulation Package (VASP), which is a sort of pseudo potential method. The detail of electronic structure was obtained by the describe variational $X{\alpha}(DV-X{\alpha})$(DV-Xa) method, which is a sort of molecular orbital full potential method. The optimized crystal structures obtained by calculations were compared to the measured structure. The density of state and energy levels of dopant elements was shown and discussed in association with properties.

• Journal of the Korean Ceramic Society
• /
• v.31 no.6
• /
• pp.587-594
• /
• 1994

(Ba, Sr)TiO3-based PTCR ceramics were sintered and cooled down with various cooling conditions in the air. AES was applied to investigate the composition change in the grain boundary and bulk area of oxidatively cooled samples. Ba component was deficit in grain boundary region, while oxygen was abundant than bulk region. The discrete changes of oxygen binding energies were confirmed in the grain boundary region of the heavily oxidized samples. It was supposed that the large binding energy shift resulted from the oxidation of the segregated Mn in grain boundary region and this idea was supported by the DV-X$\alpha$ molecular energy simulation.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.277-278
• /
• 2008

Localization system is an important problem for Wireless Sensor Networks(WSN). Since the sensor nodes are limited, the range-based that uses the special device for localization is unsuitable in WSN. DV-Hop is one of the range-free localization algorithm using hop-distance and number of hop count. But Its disadvantage is that it spend large communication cost in scalable sensor nodes. We propose a simple algorithm to reduce the communication cost, using the smallest number of hop count.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.372-374
• /
• 2003

The optical flow theory can be utilized for automatically tracking and positioning homologous points in digital video (DV) image sequences. In this paper, the Lucas-Kanade optical flow estimation (LKOFE) method and the normalized cross-correlation (NCC) method are compared and analyzed using the DV image sequences acquired by our SONY DCRPC115 DV camera. Thus, an improved optical flow estimation procedure, called 'Iterated Optical Flow Estimation (IOFE)', is presented. Our test results show that the trackable range of 3${\sim}$4 pixels in the LKOFE procedure can be apparently enlarged to 30 pixels in the IOFE.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.2
• /
• pp.405-423
• /
• 2022

The distance vector-hop (DV-Hop) is one of the emblematic algorithms that use node connectivity for locating, which often accompanies by a large positioning error. To reduce positioning error, the bio-inspired algorithm and weight optimization model are introduced to address positioning. Most scholars argue that the weight value decreases as the hop counts increases. However, this point of view ignores the intrinsic relationship between the error and weight. To address this issue, this paper constructs the relationship model between error and hop counts based on actual communication characteristics of sensor nodes in wireless sensor network. Additionally, we prove that the error converges to 1/6CR when the hop count increase and tendency to infinity. Finally, this paper presents a modified error-oriented weight positioning model, and implements it with genetic algorithm. The experimental results demonstrate excellent robustness and error removal.

• Journal of Digital Contents Society
• /
• v.14 no.4
• /
• pp.557-564
• /
• 2013

An important research challenge about the traditional Internet environment is to enable open networking architecture on which end users are able to innovate the Internet based on the technologies of network programmability, virtualization, and federation. The SDN (Software Defined Network) technology that includes OpenFlow protocol specifications, is suggested as a major driver for the open networking architecture, and is closely coupled with the classical Internet (non-SDN). Therefore, it is very important to keep the integrated SDN and non-SDN network infrastructure reliable from the view point of network operators and engineers. Under this background, this paper proposes an operations and management framework for the combined software defined network environment across not only a single-domain network, but also multi-domain networks. The suggested framework is designed to allow SDN controllers and DvNOC systems to interact with each other to achieve sustainable end-to-end user-oriented SDN and non-SDN integrated network environment. Plus, the proposed scheme is designed to apply enhanced functionalities on DvNOC to support four major network failure scenarios over the combined network infrastructure, mainly derived from SDN controllers, SDN devices, and the connected network paths.

• Journal of Welding and Joining
• /
• v.33 no.5
• /
• pp.35-40
• /
• 2015

Characterization of microstructures and mechanical properties of 83mm thickness EH36-TM welds produced by the combined flux cored arc (FCA) and electro gas (EG) welding processes has been studied with the two different groove conditions, single-V (SV) and double-V (DV) bevels. The welding consumables used for FCA and EG welding processes were ASME/AWS A5.29 (E81T1-K2) and A5.26 (EG72T), respectively. Experimental results showed that all the mechanical properties of welds such as tensile property, CVN toughness and Vickers hardness met IACS requirements. The tensile strength of EG welded plates were reduced by approximately 4% (DV: 3.8%, SV: 4.2%) compared to the base metal. The hardness value of SV-beveled weld metal was slightly lower than that of DV-beveled one. There were no significant differences as per welding groove conditions except for the weld metal. In addition, at the fusion line, the toughness of SV condition was 20J lower and the weld metal was 40J lower than DV condition, respectively. On the basis of microstructural analysis, grain boundary ferrite (GBF) structures for SV condition were 2 times higher volume fraction than for DV condition and their packet sizes were coarsened to almost double. It was thus suggested that the GBF volume fractions and packet sizes in the weld metal of EH36-TM steel plates are the most important factors affecting the mechanical properties of the combined FCA and EG welded joint. Nevertheless, all the results of welds with both DV and SV conditions were found to be excellent.

• 한국HCI학회:학술대회논문집
• /
• 2007.02a
• /
• pp.243-249
• /
• 2007

In this paper we introduce a system that assists news reporters to easily edit source video anywhere, and transfer the result from a remote site to the station. Presently reporters are bothered to edit source materials, compress and transfer using several separate tools. Moreover such tools have lots of too complicated features to use only for news production. We have integrated file sending and video editing functions together for seamless workflow. News programs usually need promptness in production. For this reason our system is designed to make it possible the one-stop production of news items outside the TV station. Also the system reflects the demands of field workers, that is, easy usage for the beginner and features for speedy news production. One of the most focused is that the reliability of the system is guaranteed in the process of transfer. To achieve this end, we have implemented several error-resilient schemes for unexpected network errors. Our system consists of remote laptop editing terminals and a newsgathering server. DV-format based editing and analog-to-DV converting device are adopted to capture video from not only lightweight DV camcorders but also old-fashioned ENG cameras into laptop computers. We expect that news reporters and cameramen can take terminals anywhere the Internet is available and both editing and sending will be done on the spot. This will help increase the competitive power of our news production.