• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.598-599
• /
• 2017

In motor application, High efficiency is important. So Design engineer select small gate resistor for lower switching. But There is side effect with small gate resistor. It makes large dv/dt and system request large EMI filter. It makes price increase. This paper introduce about gate drive IC which have solution both of lower loss and EMI issue.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2006.05a
• /
• pp.123-126
• /
• 2006

멀티미디어 홈 네트워크 환경을 위해서는 A/V(Audio/Video)데이터의 실시간 전송에 유리한 IEEE1394 네트워크와 이동성을 편리하게 지원하고, 홈 외부로의 전송에 적합한 이더넷의 상호 연동 서비스가 필요하다. 따라서 본 논문은 가정내의 IEEE1394 기반 A/V 장치에서 홈 내부 및 외부의 이더넷 기반 모바일 장치로 멀티미디어 데이터를 전송하고, 인터넷의 멀티미디어 데이터를 IEEE1394 기반 A/V 장치로 전송하는 홈 게이트웨이의 구조를 제안한다. 멀티미디어 데이터의 실시간 전송을 위해 DV to MPEG4 트랜스코더를 DV, MPEG4 코덱을 통해 구현하였고, IEEE1394 네트워크와 이더넷 사이의 멀티미디어 데이터 전송 및 제어를 위해 스트리밍 서버와 MPEG4 코덱을 내장한 클라이언트, 그리고 IEC61883 규격을 이용한 IEEE1394 장치 제어 모듈을 제작하였다.

• Proceedings of the KIEE Conference
• /
• 1997.07f
• /
• pp.2234-2236
• /
• 1997

The SIT, a Static Induction Transistor, is a semiconductor switch that is also called the power junction field-effect transistor (power JFET). Its characteristics are similar to a MOSFET except that its power level is higher and its maximum frequency of operation is lower. The normal method to protect against internal circuit transients of the form of di/dt or dv/dt is the use of snubber circuits. However, the limits of di/dt and dv/dt are high enough for the SIT that it is possible to operate without snubber circuits. SITs can be connected in parallel in order to cope with higher load currents that the value of an individual device rating. The purpose of this study is to investigate the parallel operation of SITs. In this experiment, we used a half-bridge inverter, the output of inverter is up to almost 1MHz and 2kW. Experimental results show that the operation of parallel connected SITs are facilitated individually good current sharing. The reason is the positive temperature coefficient of resistance of the SIT.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.6
• /
• pp.546-555
• /
• 2001

In this paper filtering techniques to reduce the adverse effects of motor leads on high-frequency PWM inverter fed AC motor drives are presented. The filter was designed to keep the motor terminal from the cable surge impedance to reduce overvoltage reflections ringing and the dv/dt, di/dt, at the motor terminals. Specially the output filter is used to limit the rate of the inverter output voltage and reduce common mode noise to the motor, The performance of the output filter is evaluated through simulations and experiment on PWM inverter-fed AC motor drive. An experimental PWM drive system reduction of conducted EMI was implemented on an available TMS320C31 microprocessor control board Finally, experimental result shows inverter output filter reduces more common mode voltage than low pass filter also reduce overoltage and ringing at the motor terminal.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.05a
• /
• pp.47-50
• /
• 2005

In this paper, we investigate a filtering technique to reduce the adverse effect of long motor leads on H-bridge cascaded 7-level inverter fed ac motor drive. The switching surge voltage becomes the major cause to occur the insulation failure by serious voltage stress in the stator winding of high voltage induction motor. However, the effect of switching surge appears un seriousin high voltage induction motor than low voltage induction motor. Consequently, we demonstrated that the filter connected to the motor terminals greatly reduces the transient voltage stress and ringing, moreover we show lowers the dv/dt of the inverter switching pulse. The results of simulation show the suppression of dv/dt and the reduced peak voltage at the motor end of a long cable.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.11
• /
• pp.2550-2556
• /
• 2012

We proposed the energy-efficient routing algorithm ALPS (Ad hoc network Localized Positioning System) algorithm that is range-free based on the distance information. The routing coordinate method of ALPS algorithm consists of hierarchical cluster routing that provides immediately relative coordinate location using RSSI(Received Signal Strength Indication) information. Existing conventional DV-hop algorithm also to manage based on normalized the range free method, the proposed hierarchical cluster routing algorithm simulation results show more optimized energy consumption sustainable path routing technique to improve the network management.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.4
• /
• pp.313-320
• /
• 2003

This paper deals with the optimal design of a elevator inverter system based on the customized IPM. The proposed method reduces dv/dt and di/dt, which resulted in the minimized conducted EMI noise without an additional circuitry. It only optimizes the value of gate resistor in the IGBT embedded in the IPM. In order to optimize the customized IPM to a elevator system, we simulated and measured the spike voltage and the motor surge voltage including the temperature variation due to the switching losses at the IPM case and heat-sink. As a result, thanks to the optimized value of the gate resister in the IPM, the conducted EMI noise is reduced approx. 5∼10 [dB$\mu$V] in a particular frequency domain.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.900-903
• /
• 2003

Using $DV-X{\alpha}$ method, it is calculated that nickel reduces the energy band gap of manganese oxide in 3 additives of titanium, nickel and tin. Therefore, it is estimated that the electrical conductivity of manganese-nickel oxide has the lowest value in 3 kinds of manganese oxide. The manganese oxide and manganese-nickel oxide which were produced by anodic deposition under $30mA/cm^2$ at room temperature in manganese sulfate and manganese-nickel sulfate solution were thermal-analyzed by DTA and TGA. The weight change of manganese oxide continuously decreased below $508^{\circ}C$ and kept constant at $518{\sim}600^{\circ}C$. However, the manganeses-nickel oxide transformed at the temperature range of $510{\sim}537^{\circ}C$. It is observed that the nickel addition to manganese oxide increases transformation temperature and its range.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.7
• /
• pp.43-49
• /
• 2000

We proposed ADD(Alternate Directional Delay) circuit technique as the DLL(Delay Locked Loop) circuits which technique is established the data valid window(tDV) in DDR(Double Data Rate) Synchronous DRAM. This technique could be decrease area-overhead which it could generated bidirectional clock simultaneously using only one delay chain block. In this paper for high speed memory with relatively small size. This technique decreased area-overhead more 2 times than SMD(Synchronous Mirror Delay) technique. ADD technique has 50ps-140ps jitter and the operation frequency has 166MHz-66MHz range.(at 2.5V, TYP. condition)

• Journal of Nutrition and Health
• /
• v.39 no.6
• /
• pp.585-591
• /
• 2006

The amount of sodium in the processed foods was evaluated by the information on the nutrition label. One-meal type foods as Ramen, Woodong, Naengmyon provide the most sodium reaching 30 - 70% DV per serving size. In Ramen not much difference was observed for the sodium content by food companies though each company provides various amount of sodium reducing as much as 25% DV. The proportion of female college students who read the nutrition information reached 62% but it remained 32% on the sodium information. They purchase low sodium foods rarely however their intention to buy low sodium foods increased up to 40% in condition that sodium information is given on the food label. Nevertheless 50% of them would not buy low sodium food if the taste is undesirable. Low sodium ramen cooked with 80% soup-base was acceptable by the subjects. Majority of them responded the soup was rather salty indicating the reduction of sodium in ramyeon is possible.