• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.418-422
• /
• 2017

Based on published materials, we compared specifications of mating electrical connectors for the NASA Standard Initiators NSI-1,2,3 with each other after the initiator specifications summary. The mating connector specifications for NSI-1,2 are MSFC-40M38298 and MIL-DTL-26482, series1 while for NSI-3 is MIL-DTL-38999, series3. The MIL-DTL-38999, series3 has the highest overall environmental resistance performance. MSFC-40M38298 is the next and MIL-DTL-26482, series1 follows. In particular, if initiators be used under severe shock and vibration environments, the MIL-DTL-38999, series3 should be applied.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2907-2912
• /
• 2007

The cooling water system for the PEFP 20 MeV proton accelerator was established and tested to obtain the precise resonance frequency of DTL through the temperature control of cooling water. The water temperature in the main flow loop was manipulated by adjusting the proportion of hot water returning from the DTL structures through the heat exchanger loop. Due to low duty factor operation and insufficient cooling loop installation of the DTL tanks, the manual mode operation was applied to maintain the DTL temperatures close to their resonance temperatures. The optimized process conditions with flow balancing and pressure drop in the DTL cooling systems are reported.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2003.05a
• /
• pp.429.1-429.1
• /
• 2003

• Proceedings of the Korean Nuclear Society Conference
• /
• 2003.05a
• /
• pp.429.2-429.2
• /
• 2003

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2064-2069
• /
• 2008

The Resonance Control Cooling System (RCCS) prototype installed in KAERI site has been designed to control the resonant frequency of the normal conducting drift tube linac (DTL) for the Proton Engineering Frontier Project (PEFP). The RCCS water pumping skid is composed of two channels as a by-passing the cooling water and a plate heat exchanger. The required temperature can be achieved by mixing both channels in order to control its the resonant frequency at 350 MHz. The temperature controlled water pumping skid operates in combination with the Low Level Radio Frequency (LLRF) system. We have discussed the design, modeling with each components, control scheme, fabrication and test results of the water pumping skid for resonant frequency control of the DTL cavity. In conclusion, the fabricated RCCS prototype through the optimization of modeling has corresponded with the design requirement and concept.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.10a
• /
• pp.917-918
• /
• 2005

DT and EQM for PEFP DTL II was designed. It was verified that EQM satisfied the required parameters from the physical design of the DTL II. It was verified also that DT design which contained the EQM satisfied the structural requirements.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1277-1282
• /
• 2009

The main objective of this prototype is to control resonance frequency of DTL system through the temperature control of cooling water. It is to resonant frequency of the drift tube cavities to 350 MHz. This paper describes the design of a prototype cooling water skid required for the temperature control of the DTL cavities, focusing in the modeling and simulation of the cooling system, the sizing of water pumping skid component.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2003.05a
• /
• pp.430.2-430.2
• /
• 2003

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.8
• /
• pp.806-812
• /
• 2010

Fuel tanks for rotorcraft have a great influence on the survivability of crews. The philosophy of crashworthy rotorcraft design evolved from the long term effort of the US Army. US army established MIL-DTL-27422D for specifying detail requirements related to crash resistant fuel tank especially for military rotorcraft to prevent post crash fire which is the greatest threat to life in rotorcraft crash. Crashworthiness of the rotorcraft fuel tank could be guaranteed through the crash impact tests which are specified in the MIL-DTL-27422D. Fuel tanks for Korea Helicopter Program have been developed and tested according to MIL-DTL-27422D with minor modifications of flexible fittings. The present study shows some results of the mandatory crash impact tests of the fuel tanks to verify their performances.

• Journal of Cadastre & Land InformatiX
• /
• v.51 no.1
• /
• pp.5-22
• /
• 2021

Digital Twin for Land(DTL) is one of the national work projects in the Korean New Deal but there aren't still any standards and technical guides which would need to construct the DTL. This study presents the policies to develop reference model and data model based on geo-spatial information standards to ensure interoperability for the DTL. In this paper, we first extract the implications through reviewing definitions of Digital Twin used in various literatures and international standardization trends on Digital Twin. In addition, this study attempts to conceptualize the DTL through various ways such as defining the DTL and characterizing DTL domains. Finally, we propose three policies on the standardization of the DTS: (1) DTS reference model by using RM-ODP, (2) three-steps hierarchical data models, and (3) model registry to manage the data models efficiently. The proposed policies of the study would contribute to establish a way for DTS's standards development over the coming years.