• Macromolecular Research
• /
• v.12 no.3
• /
• pp.258-262
• /
• 2004

We have developed facile and rapid polycondensation reactions of N-trimellitylimido-L-leucine diacid chloride 1 with eight different derivatives of hydantoin compounds 2a-h, in the presence of a small amount of a polar organic medium, such as Ο-cresol, by using a domestic microwave oven. The polycondensation reactions proceeded rapidly-they were complete within 7-9 min-to produce a series of novel optically active poly(amide-imide)s (3a-h) in high yield with inherent viscosities of 0.33-0.51 dL/g. We characterized the resulting poly(amide-imide)s by elemental analysis, thermal gravimetric analysis (DSC, TGA, and DTG), and FTIR spectroscopy, and by measuring their viscosities, specific rotations, and solubilities. All of the polymers were soluble at room temperature in polar solvents such as N ,N-dimethylacetamide, N,N-dimethylformamide, dimethylsulfoxide, tetrahydrofuran, and N-methyl-2-pyrrolidone.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.4
• /
• pp.428-433
• /
• 1999

The errors of IMU(Inertial Measurement Unit) can be divided into deterministic and random errors. Since the required accuracy of the IMU is very high, the errors must be compensated by using an accurate error mode. In this paper, we present a method to get a more accurate error model in a laboratory test. This was done by considering the setting misalignment in the laboratory test in the IMU error model. We considered here the IMU which consits of DTG(dynamically tuned gyroscope) and pendulum type accelerometer. First, it was shown that the estimation result from the model which does not contain the setting misalignment gives considerable estimation error at the validation test. Second, a new model considering the setting misalignment was derived. Finally, by validation test using the estimation results from new model the validity of it was proved.

• Journal of Radiation Industry
• /
• v.3 no.1
• /
• pp.31-37
• /
• 2009

This paper describes the preparation of manufacturing a new nanocomposite material, which involves adding a multi walled carbon nanotube (MWCNT) to improve thermal characteristics of poly (ethylene-co-vinyl acetate) (EVA). We irradiated the prepared nanocomposites with doses of 50 kGy, 100 kGy and 200 kGy at a dose rate of $5kGy\;hr^{-1}$ and examined their thermal stability, activation energy and crosslink level by using a thermogravimetric analyzer (TGA) and gel fraction experiments. TGA results indicated that the samples with a MWCNT had higher Derivative Thermo Gravimetry (DTG) 2nd peak temperatures than those without a MWCNT. And activation energy of the samples reduced as the absorption dose and the MWCNT content increased. Finally, the gel fraction increased rapidly up to 100 kGy as total absorption dose increased, and then the growth rate of all samples was slowly increased from 100 kGy.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.2
• /
• pp.13-22
• /
• 1997

Strapdown inertial navigation system(SDINS) is a navigational instruments necessary to guide and con- trol a free vehicle. In this study, an error analysis of mechanical parts is carried out for manufacturing a dynamically tuned gyroscope. The errors usually come from the tolerance in machining and assembly. In the error analysis, a criterion to be considered during designing and manufacturing is proposed by quanti- tatively analyzing the effect of DTG performance by tolerances. The theory of dynamic balancing is deduced and unbalance is reduced through experiment.

• The Korean Journal of Nuclear Medicine
• /
• v.11 no.1
• /
• pp.39-48
• /
• 1977

Radioactive iodine(RAI), principally $^{131}I$, effectively controls hyperthyroidism in the majority of patients. The subsequent development of hypothyroidism, however, has been of increasing concern since it was first pointed out by Chapman and Maloof in 1955. And the steady increase of late hypothyroidism during the passage of time was known with its relation with dosage of RAI. The authors have investigated the development of hypothyroidism in 935 patients with diffuse toxic goiter(DTG) who were treated with ($RAI^{131}I$) at the Seoul National University Hospital from 1960 to 1977 to reveal its relation with the number of RAI treatments, dosage of RAI, age of patients and exophthalmos with the following results. 1) The incidence of hypothyroidism by year after RAI therapy among 631 patients with DTG who were treated with single RAI regimen was 7.4%(1 year), 11.8%(2 year), 16.2%(3 year), 22.1%(4 year) and 25.5%(5 year), and that among 163 patients given multiple RAI treatments was 8.6%(1 year), 10.4%(2 year), 13.3%(3 year), 29.1%(4 year), and 54.1%(5 year)respectively showing much higher year1y increments from 4 years after RAI treatment. in comparison with the former. 2) Among 550 patients in the lower dose group treated with single RAI regimen less than 5.0mCi ($Mean{\pm}S.D.:\;4.3{\pm}0.6mCi$), the incidence of hypothyroidism by year after RAI treatment was 6.8%(1 year), 11.4%(2 year), 15.4%(3 year), while among 81 patients in the higher dose group given single RAI treatment not less than 5.5 mCi ($Mean{\pm}S.D.:\;6.3{\pm}0.5mCi$) it was 12.0%(1 year), 15.4%(2 year) and 20.4%(3 year) respectively. However, the duration till euthyroid state after RAI therapy in the two groups was $5.1{\pm}3.6$ months and $4.8{\pm}2.8$ months respectively showing no statistically signficant difference (p>0.1). 4) The incidence of hypothyroidism after RAI treatment in patients younger than 30 years of age was 4.3%(1 year) and 7.7%(2 year); in patients from 30 years to 49 years of age, 5.8%(1 year) and 11.1%(2 year); and in those older than 50 years, 11.0%(1 year) and 14.4%(2 year). The data revealed rising incidence of hypothyroidism with increase of patients' age. 4) Among 116 patients with exophthalmos the incidence of hypothyroidism by year after RAI treatment was 7.1%(1 year) and 12.1%(2 year) while that among 184 patients without exophthalmos was 7.3%(1 year) and 12.2%(2 year) respectively. With the above data the authors could conclude that the hypothyroidism in patients with DTG who were treated by RAI developed more frequently than reported by others in Korea till now, and increased with the passage of time, the yearly increments from 4 years after RAI treatment increasing markedly in the multiple dose group, and the incidence could be reduced by decreasing the administered RAI doe not increasing the duration till euthyroid state after RAI therapy.

• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.954-962
• /
• 1996

Four kind of polysilanes which had side chains of methyl, phenyl, and mixed structures, were synthesized and modified by doping with iodine. The structural, thermal, and electric characteristics of obtained polymers were systematically observed with iodine, The structural, thermal, and electric characteristics of obtained polymers were systematically observed with FT-IR, UV/VIS, TGA/DTG, DSC, and measurement of electric conductivity. From FT-IR spectra, it was confirmed that the synthesized polysilanes had side chains of methyl, phenyl, and mixed structures. The thermal stabilities of the polymers were found to increase with phenyl substituents. The polysilanes with phenyl side groups showed ${\sigma}-{\sigma}*$ transition absorption at wavelengths longer than 350 nm. The bathochromic shift of polysilanes with phenyl substituents relates probably to the narrowed band gap caused by delocalization of ${\pi}$-electron. The polymers doped with iodine showed multi-step pyrolysis behavior and higher residue compared with that of the undoped polymers. The electric conductivities of the undoped and doped polysilanes were $10^{-5}S/cm$ and $10^{-4}S/cm$, respectively.

• Applied Biological Chemistry
• /
• v.22 no.1
• /
• pp.58-63
• /
• 1979

The solvent extracting of the tobacco has been carried out in order to find out any effects for the removal and/or reduction of nicotine from tobacco without affecting the tobacco flavor. We have now completed the physico-chemical characterization of the solvent untreated/treated tobaccos and 2) the contents of the tar and nicotine in the smoke. The results obtained ate like followings; 1. 3% alcohol extraction reduced the total nitrogen content for the Bright by 36.4%. However, it could not reduce the sugar content. 2. Nicotine content in tobacco leaves was inversely proportional to the dipping time Essentially same results were obtained in anacidic solution and even in a solution containing both alkali and acid. 3. Derivative thermogravimetric(DTG) curves indicated test extraction was effective by removing tobacco leaf components which could decompose or volatilize between the temperature of $150^{\circ}C\;and\;350^{\circ}C$. 4. 3% alcohol extracted leaf have the substantial improvements as following; (1) bulk filling power of 10% and 24% for Burley and Bright tobacco, respectively, (2) combustibility shortening of about 3 minute and 2 minute for Burley and Bright tobaccos, respectively, (3) reduction ratio(%) of nicotine was found to be shout 61.5% and 54.5% for Burley and Bright tobacco, respectively, (4) reduction ratio (%) of tar was obtained to he about 25% and 15% for Burley and Bright tobacco, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.9
• /
• pp.3295-3305
• /
• 2011

Thermal behavior of poly (methyl methacrylate) was analyzed in the presence of tin (IV) chloride. Five different proportions - polymer to additive - were selected for casting films from common solvent. TG, DTG and DTA were employed to monitor thermal degradation of the systems. IR and py-GC-MS helped identify the decomposition products. The blends start degrading at a temperature lower than that of the neat polymer and higher than that of the pure additive. Complex formation between tin of additive and carbonyl oxygen (pendent groups of MMA units) was noticed in the films soon after the mixing of the components in the blends. The samples were also heated at three different temperatures to determine the composition of residues left after the expulsion of volatiles. The polymer, blends and additive exhibited a one step, two-step and three-step degradation, respectively. $T_0$ is highest for the polymer, lowest for the additive and is either $60^{\circ}C$ or $70^{\circ}C$ for the blends. The amount of residue increases down the series [moving from blend-1 (minimum additive concentration) to blend-5 (maximum additive concentration)]. For blend-1, it is 7% of the original mass whereas it is 16% for blend-5. $T_{max}$ also goes up as the concentration of additive in the blends is elevated. The complexation appears to be the cause of observed stabilization. Some new products of degradation were noted apart from those reported earlier. These included methanol, isobutyric acid, acid chloride, etc. Molecular-level mixing of the constituents and "positioning effect" of the additive may have brought about the formation of new compounds. Routes are proposed for the appearance of these substances. Horizontal burning tests were also conducted on polymer and blends and the results are discussed. Activation energies and reaction orders were calculated. Activation energy is highest for the polymer, i.e., 138.9 Kcal/mol while the range for blends is from 51 to 39 Kcal/mol. Stability zones are highlighted for the blends. The interaction between the blended parts seems to be chemical in nature.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.6
• /
• pp.31-42
• /
• 2007

To investigate the pyrolytic and anatomical characteristics of Korean softwood, Pinus densi-flora, Pinus rigida and Larix leptolepis, and hardwood, Acer palntatum, Fraxinus rhynchophylla and Quercus variabilis, chemical components analysis, TG-DTA (Thermogravimetric Analysis & Differential Thermal Analysis), MBA (Methylene Blue Adsorption) test and SEM observation were carried out. For TG-DTA, samples were carbonized up to $800^{\circ}C$ at the heating rate of $10^{\circ}C$/min under $N_2$ flows 1 l/min using thermogravimetric analyzer. Chemical component analysis of all samples resulted in typical contents of major wood component. In TG-DTA results, softwood showed higher char yield than hardwood, and lignin displayed the highest char yield among the major wood components. All samples showed typical TGA, DTG and DTA curves for wood pyrolysis except a few differences between softwood and hardwood. Content of lignin influenced its pyrolysis characteristics, while molecular structure of lignin affected not only the weight loss but also the yield of char. In MBA test results, MBA of softwoods was higher than that of hardwoods. Char of Pinus densiflora showed the highest MBA, but its degree was lower than activated carbon or fine charcoal about 23 and 4 times, respectively. SEM observation showed carbonization process preserves wood structure and retain the micro-structure of wood fibers.

• Journal of the Korean Chemical Society
• /
• v.38 no.2
• /
• pp.92-100
• /
• 1994

Ultrafine cobalt-substituted iron oxide particles were prepared by the thermal decomposition and oxidation of the new organometallic precursor, $Co_xFe_{1-x}(N_2H_3COO)_2(N_2H_4)_2$ (x = 0, 0.01, 0.02, 0.03, 0.05, 0.10, 1.00). The organometallic precursors were synthesized by the reaction of Co(II) and Fe(II) ion in a mole ratio of x : 1-x with hydrazinocarboxylic acid, and characterized by quantitative analysis, elemental analysis and infrared spectroscopy. The mechanistic study on the thermal decomposition of the organometallic precursors was performed by TG-DTG and DSC. The cobalt-substituted iron oxide particles were obtained by the heat treatment of the precursors at $350^{\circ}C$ and $450^{\circ}C$ for six hours in air. The prepared iron oxide was found to have two phases such as ${\gamma}-Fe_2O_3$ and a mixture of ${\gamma}-Fe_2O_3\;and\;{\alpha}-Fe_2O_3$ at $350^{\circ}C$ and $450^{\circ}C$ respectively. The particle shape was equiaxial and the particle size was less than 0.05 ${\mu}m.$ The coercivity and squareness of the cobalt substituted iron oxide particles increased with increasing cobalt content. Both coercivity and squareness showed higher values at $450^{\circ}C.$