• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.3 no.1 s.4
• /
• pp.21-30
• /
• 2004

This paper describes the design of RF link between RSE and OBU of ETCS and the analysis of the antenna beam pattern to get a proper communication area in the cross direction and traveling direction of lanes. This stage should be performed prior to determination of system requirements of ITS service based on active DSRC. This study is important and fundamental technical analysis to design and implement base station of ETCS.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.6
• /
• pp.1873-1879
• /
• 2014

There are various methodologies to forecast the travel time using real-time data but the K-nearest neighborhood (KNN) method in general is regarded as the most one in forecasting when there are enough historical data. The objective of this study is to evaluate applicability of KNN method. In this study, real-time and historical data of toll collection system (TCS) traffic flow and the dedicated short range communication (DSRC) link travel time, and the historical path travel time data are used as input data for KNN approach. The proposed method investigates the path travel time which is the nearest to TCS traffic flow and DSRC link travel time from real-time and historical data, then it calculates the predicted path travel time using weight average method. The results show that accuracy increased when weighted value of DSRC link travel time increases. Moreover the trend of forecasted and real travel times are similar. In addition, the error in forecasted travel time could be further reduced when more historical data could be available in the future database.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4A
• /
• pp.415-422
• /
• 2004

DSRC provides high speed radio link between Road Side Equipment and On-Board Equipment within the narrow communication area. In this paper, a 5.8 GHz down-conversion mixer for DSRC communication system was designed and fabricated using 0.8 ${\mu}{\textrm}{m}$ SiGe HBT process technology and RF/LO matching circuits, RF/LO input balun circuits, and If output balun circuit were all integrated on chip. The chip size of fabricated mixer was 1.9 mm${\times}$1.3 mm and the measured performance was 7.5 ㏈ conversion gain, －2.5 ㏈m input IP3, 46 ㏈ LO to RF isolation, 56 ㏈ LO to IF isolation, current consumption of 21 mA for 3.0 V supply voltage.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.4A
• /
• pp.350-357
• /
• 2005

DSRC provides high speed radio link between Road Side Equipment and On-Board Equipment within the narrow communication area. In this paper, a 5.8 GHz up-conversion mixer for DSRC communication system was designed and fabricated using 0.8 m SiGe HBT process technology and IF/LO/RF matching circuits, IF/LO input balun circuits, and RP output balun circuit were all integrated on chip. The chip size of fabricated mixer was $2.7mm\times1.6mm$ and the measured performance was 3.5 dB conversion gain, -12.5 dBm output IP3, 42 dB LO to If isolation, 38 dB LO to RF isolation, current consumption of 29 mA for 3.0 V supply voltage.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.2
• /
• pp.393-400
• /
• 2015

As the development and distribution of the intelligent transport system is spreading recently and some of the services are commercialized through a pilot project, interest in DSRC with high utilization is increasing and antennas for roadside and on board equipment are being studied. A single patch was used for a vehicle antenna due to the requests of miniaturization of size, but there was performance degradation in most cases due to miniaturization. In addition, some methods to improve performance have been used in the antennas that were previously researched using the arrays, but they have the disadvantages of bulkiness in size of the antennas when using the arrays. Therefore, in this paper, the CPW fed microstrip patch antenna with the simple structure of being compact and easy to produce, which can be used in the OBU of DSRC, was designed.

• Journal of Advanced Navigation Technology
• /
• v.5 no.2
• /
• pp.165-174
• /
• 2001

In this paper, we investigated performance for 5.8 GHz dedicated short range communication system using OFDM which will be applied to Intelligent transportation system services. We analyzed modulation technique and interference cancellation method to improve performance in physical layer. We presented channel model to estimate performance between Roadside Unit and Onboard Unit. finally, We calculated the link budget of entire system which analyzed performance of channel according to transmission power, presented the adaptive modulation using pilot signal and RSSI algorithm is proposed.

• Korean Journal of Materials Research
• /
• v.29 no.6
• /
• pp.363-370
• /
• 2019

The recent development of information and communication technologies brings new changes to automobile traffic systems. The most typical example is the advancement of dedicated short range communication(DSRC). DSRC mainly consists of an intelligent transportation system(ITS), an electronic toll collection system(ETCS) and an advanced traveler information system(ATIS). These wireless communications often cause unnecessary electromagnetic waves, and these electromagnetic waves, in turn, cause frequent system malfunction. To solve this problem, an absorber of electromagnetic waves is suggested. In this research, various materials, such as powdered metal and iron oxides, are used to test the possibility for an effective absorption of the unnecessary electromagnetic waves. The various metal powders are made into a thin sheet form by compositing through processing. The electromagnetic characteristics(complex permittivity, complex permeability) of the fabricated sheet are measured. As a result, we achieve -6.5 dB at 940 MHz(77.6 % absorption rate) with a 1.0 mm-thickness electromagnet wave absorber, and -9.5 dB at 940 MHz(88.8 % absorption rate) with a 2.0 mm-thickness absorber.

• Journal of Korean Society of Transportation
• /
• v.22 no.2 s.73
• /
• pp.165-175
• /
• 2004

본 고는 대전광역시 첨단교통모델도시 건설사업의 일환으로 구축된 DSRC(Dedicated Short Range Communication) 기술을 활용한 교통정보시스템 구축 사례를 소개함을 목적으로 한다. 공공부문에서의 구간정보 수집 및 가공 체계 구축은 본 대전 ITS 사업이 처음이며 더욱이 DSRC 기술을 구간정보 수집에 적용한 최초의 시도이다. 이에 시스템 구축과정에서 적지 않은 쟁점이 도출되었고, 많은 시행착오를 통해 그 해법을 찾아가며 현재 운영중인 시스템을 완공하게 되었다. 노변기지국(RSE)과 차량장치(OBE)간의 통신에 의해 수집된 자료는, 필터링, 검지기 지점정보, 패턴데이터 등과의 자료합성, 평활화, 통계정보 및 패턴정보 생성 등의 과정을 거쳐 구간소통정보가 산출된다. 현재 운영중인 본 시스템은 향후 지속적으로 보완 발전시켜 나가야 하며, 이를 위해 프로브 수집체계 보완, 시스템의 성능평가, 패턴데이터의 적절한 유지관리, 알고리즘의 지속적 발전 등을 향후과제로서 제시하였다. 본 고는 ITS사업에 있어 중요 쟁점중에 한 분야인 소통정보의 가공 절차를 공유함으로써, 관련 분야의 기술개발 촉진과 향후 유사시스템 구축의 시행착오를 줄이는데 기여할 수 있으리라 판단된다.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.04a
• /
• pp.197-200
• /
• 2000

지능형 교통 시스템(ITS. Intelligent Transportation System)은 도로, 차량, 신호시스템 등 기본 교통체계의 구성요소에 첨단 정보통신 기술을 접목함으로써 교통시설의 기반구조에 대해 지능화와 첨단화를 꾀하고자 하는 차세대 교통체계로 우리 나라가 처한 교통 환경의 실태와 기존 교통체계의 문제점을 고려할 때 당면한 교통 문제를 해결해 줄 수 있는 유력한 방안으로 여겨진다. ITS는 운전자 혹은 도로 교통 시스템에 각종 응용 서비스를 제공하게 되는데 이를 위해서는 도로변에 위치하는 기지국 등의 ITS 기반 요소들과 도로를 운행 중인 차량간의 빠르고 정확한 정보교환이 가능해야 한다. 정보교환을 위한 통신 기술 중 하나인 DSRC(Dedicated Short Range Communication)는 저출력의 양방향 통신 특성을 갖고 ITS가 제공하는 대부분의 서비스에 다양하게 적용될 수 있으므로 효과적인 ITS의 구축과 빠른 확산을 위해 필수적인 기술로 간주되고 있다. 본 논문에서는 이러한 DSRC를 기반으로 하는 ITS통신망의 구조 정립에 대해 논하고 있다. 효과적인 ITS 서비스를 위해서는 물리적 통신망은 물론 통신망을 구성하고 있는 각 요소들과 관련되어있는 정보시스템들이 동시에 연구되어야 하므로 ISCNA(Information Systems and Communication Networks Architecture) 준거모형에 의한 접근을 하였다. 세부적인 측면으로는 서버 시스템의 구조, 서버와 서버간, 서버와 노변 기지국, 노변 기지국과 차량 단말 간의 통신망 구조 정립에 대해 살펴보았다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.8A
• /
• pp.838-845
• /
• 2008

In this study, we developed a OBE(On Board Equipment) system in which moving cars communicate directly each other to exchange traffic information. this system achieved by using DSRC(Dedicated Short Range Communication). this technology can improve the fidelity of collected information by transferring current state information from a moving car to center in real time. As a consequence of it, moving cars can be offer information service of hight quality even in a shadow zone. and also, in addition to basic ETC function for toll payment, using our newly developed system, delivering traffic information and providing additive service like GPS can be achieved by car-to-car direct communication within shadow areas without additional infra-structure.