• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.150-156
• /
• 2001

This paper describes an implementation of the DSP(Digital Signal Processor) based triangular carrier frequency modulated RPWM inverter drive system. The power spectrum of the noise emitted from the induction motor was measured in the anechoic chamber. The analysis of the sources for the acoustic noise and the effects of the noise reduction are confirmed by the measured spectra of the noise. Real-time RPWM along with the speed control was achieved by high speed DSP. By changing the center frequency and the bandwidth of the carrier, the proposed real-time RPWM scheme can be used as an efficient switching frequency band acoustic noise reduction method for the inverter drive system with variant load conditions.

• 반도체디스플레이기술학회지
• /
• 제2권3호
• /
• pp.25-30
• /
• 2003

In this study, the controller using TMS320LF2407 low voltage DSP for motor control is designed and realized. It has 40 MIPS calculating ability and its driving voltage is 3.3 V for low power. The peripheral elements, however usually use 5 V and they need voltage transfer interface. In this study, voltage transformation and reducing noise are studied and space vector PWM is adopted as a motor control scheme. According to these methods, the efforts for software programming and calculation processes are reduced. In addition, the hardware is also simplified by substituting the current control part with software programming. Through this study, the DSP based servo controller increases its ability for high performance multi-function on semiconductor transportation equipments..

• 전기학회논문지
• /
• 제65권7호
• /
• pp.1176-1185
• /
• 2016

This paper proposes a new output voltage control scheme based on the SoC variation of the battery energy storage system (BESS) applicable for the stand-alone DC microgrid. The proposed control scheme provides relatively lower variation of the DC grid voltage than the conventional droop method. The performance of proposed control scheme was verified through computer simulations for a typical stand-alone DC microgrid which consists of BESS, photo-voltaic (PV) panel, engine generator (EG), and DC load. A scaled hardware prototype for the stand-alone DC microgrid with DSP controller was set up in the lab, and the proposed control algorithm was installed in the DSP controller. The test results were compared with the simulation results for performance verification and actual system implementation.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권3호
• /
• pp.136-142
• /
• 2001

In this research a Simulink/RTW-baed realtime control system was developed for an induction motor vector control. On the Simulink window, the control system is designed in the form of block diagrams, program codes are produced automatically with the RTW(Real Time Workshop), then an DSP c compiler compiles the program codes. With this automatic program producing method rapid prototyping is realized with the least time-consuming manual programming procedures. To show effectiveness of the proposed system designing scheme a DSP-based induction motor vector controller was constructed and implemented.

• 한국공작기계학회논문집
• /
• 제10권2호
• /
• pp.38-47
• /
• 2001

In this paper, a new scheme of adaptive-neuro control system is presented to implement real-time control of robot manipulator using Digital Signal Processors. Digital signal processors, DSPs, are micro-processors that are particularly developed for fast numerical computations involving sums and products of measured variables, thus it can be programmed and executed through DSPs. In addition, DSPs are as fast in computation as most 32-bit micro-processors and yet at a fraction of therir prices. These features make DSPs a viable computational tool in digital implementation of sophisticated controllers. Unlike the well-established theory for the adaptive control of linear systems, there exists relatively little general theory for the adaptive control of nonlinear systems. Adaptive control technique is essential for providing a stable and robust perfor-mance for application of robot control. The proposed neuro control algorithm is one of learning a model based error back-propagation scheme using Lyapunov stability analysis method.The proposed adaptive-neuro control scheme is illustrated to be a efficient control scheme for the implementation of real-time control of robot system by the simulation and experi-ment.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.967-971
• /
• 2004

The switched reluctance drive is known to provide good adjustable speed characteristics with high efficiency. However, higher torque ripple and lack of the precise speed control are drawbacks. In the paper, a PLL(Phase Locked Loop) technique is adopted to regulate the dwell angle instantaneously. A PLL control technique in conjunction with dynamic dwell angle control scheme has good speed regulation characteristics. The F240 DSP based control system is used to realize this drive system. Test results show that the system has the ability to achieve good dynamic and precise speed control.

• Journal of Power Electronics
• /
• 제2권4호
• /
• pp.288-296
• /
• 2002

In this paper, a high frequency transformer - assisted auxiliary active resonant commutated snubber (HFTA-ARCS) for voltage source soft switching pulse width modulated power conversion circuits is presented. A three phase voltage source type soft switching inverter incorporating HFTA-ARCS circuits in its three bridge legs can reduce current rating of auxiliary active power switches and has sensorless simplified control scheme which any specified boost current management is not required for soft switching. Its operation principle and digital control scheme are described and a practical design method of circuit parameters on this HFTA-ARCS circuit is also introduced on the basis of computer simulation. Moreover, this space voltage vector modulated soft switching inverter system with DSP-based digital control scheme Is discussed and its effectiveness is proved on the basis of performance evaluations. The operating performances of this inverter system are also compared with those of conventional three-phase hard switching inverter under practical conditions of specified parameters.

• 전력전자학회논문지
• /
• 제7권2호
• /
• pp.137-148
• /
• 2002

직접토크제어 기법은 벡터제어계 설계 및 운전시 요구되는 복잡한 좌표변환과 전류제어루프가 불필요하며, 빠른 토크응답을 얻을 수 있기 때문에 벡터제어 기법에 버금가는 유도전동기의 고성능 제어기법으로 인정되고 있다. 본 논문에서는 직접토크제어 기법 적용시 중요한 어려움의 하나로 지적되고 있는 저속영역에서의 자속저하 및 이로 인한 전류고조파의 증가 문제를 해결하기 위한 대책으로서 퍼지 가변 스위칭섹터 기법과 이 기법의 실시간 적용을 위한 실현방법을 제안하였다. 제안된 스위칭섹터 기법을 포함한 유도전동기 제어시스템의 실험적 성능을 고찰하기 위하여 DSP를 이용한 제어보드를 제작하였다. 시뮬레이션과 실험 결과는 제안된 퍼지 가변스위칭 섹터 기법을 도입함으로서 유도전동기 드라이브의 성능이 현저히 개선됨을 보여준다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.189-192
• /
• 1999

The switched reluctance drive system is known to provide a good adjustable speed and torque characteristics. However, acoustic noise and higher torque ripple are drawbacks. These drawbacks show the fact that SRM drive is not operated with mmf current specified for dwell angle and input voltage. Reducing torque ripple and having precise speed control, PLL technique is adopted. The PLL system in conjunction with dynamic dwell angle control scheme has good speed regulation characteristics. A TMS320F240 based on the DSP is used to realizing this drive system. Test results show that the system has the ability to achieve good dynamic and precise speed control.

• 대한기계학회논문집A
• /
• 제41권11호
• /
• pp.1109-1117
• /
• 2017

PLC 시스템은 자체 모듈에 의한 부분적 확장성을 지원하고 있지만, 확장을 위한 비용이 크고, 센서 및 기타 제어기들과의 언어 호환성 또한 문제가 되고 있다. 본 논문에서는 빠르게 변화하는 기술에 대처하기 위해 텍사스 인스트루먼트 사의 DSP(디지털 시그널 프로세서)를 이용하여 PLC를 대체 및 보조할 수 있는 시스템을 제안한다. 이 시스템은 기존 PLC의 기능을 통합적으로 구현하며, 범용으로 쓰이는 PLC 에 비해 속도가 빠르고, 약 50% 이상의 비용 절감이 가능하다. 또한, 모듈 형태의 24V의 범용 디지털 I/O핀을 구성함으로써 선택적으로 입력과 출력의 부분적 확장을 용이하게 하였다. 일반적 산업 장비의 제어를 위해 널리 사용되고 있는 모드버스 통신을 RS-485 인터페이스를 기반으로 DSP에서 구현함으로써, 장비 간 다대다 통신을 할 수 있도록 하였다.