• Journal of KIISE
• /
• v.44 no.2
• /
• pp.213-222
• /
• 2017

The Internet of Things (IoT) technology is rapidly developing in recent years, and is applicable to various fields. A smart factory is one wherein all the components are organically connected to each other via a WSN, using an intelligent operating system and the IoT. A smart factory technology is used for flexible process automation and custom manufacturing, and hence needs adaptive network management for frequent network fluctuations. Moreover, ensuring the timeliness of the data collected through sensor nodes is crucial. In order to ensure network timeliness, the power consumption for information exchange increases. In this paper, we propose an IEEE 802.15.4e DSME-based distributed scheduling algorithm for mobility support, and we evaluate various performance metrics. The proposed algorithm adaptively assigns communication slots by analyzing the network traffic of each node, and improves the network reliability and timeliness. The experimental results indicate that the throughput of the DSME MAC protocol is better than the IEEE 802.15.4e TSCH and the legacy slotted CSMA/CA in large networks with more than 30 nodes. Also, the proposed algorithm improves the throughput by 15%, higher than other MACs including the original DSME. Experimentally, we confirm that the algorithm reduces power consumption by improving the availability of communication slots. The proposed algorithm improves the power consumption by 40%, higher than other MACs.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2011.10a
• /
• pp.29-30
• /
• 2011

• Special Issue of the Society of Naval Architects of Korea
• /
• 2007.09a
• /
• pp.89-93
• /
• 2007

The Boil-off gas (BOG) generation during the voyage is inevitable since Natural Gas (NG) in normally liquefied below -160 degree C in atmosphere condition and small heat ingress due to relatively hot outside keeps evaporating continuously. The one of major issue in LNG carriers is to handle generated BOG from cargo tank. The generated BOG affects to increase the cargo tank pressure and Gas Management System (GMS) for LNG carriers is closely related to cargo tank pressure maintenance. Economically, BOG is generally used as fuel in LNG carrier. Newly developed GMS for LNG carrier in boiler propulsion system, VaCo System, not only accomplish automatic control in GMS but also ensure safer operation.

• Korean Journal of Computational Design and Engineering
• /
• v.18 no.4
• /
• pp.299-307
• /
• 2013

Introduction of PLM in domestic shipyards is being retarded as ship PLM has yet to firm up return of investment and process integration. To implement a ship PLM system, it is required to share ship CAD model data in various design and manufacturing environments. Lightweight CAD models provide a promising solution for sharing CAD models in the product life cycle, which can expedite implementation of ship PLM in domestic shipyards in the near future. Compared to proprietary CAD models, it is easy for lightweight CAD models to be interfaced with various application systems and be connected to manufacturing information. In this paper, the reason why lightweight CAD models are necessary to implement a ship PLM system is addressed and current implementation results are introduced.

• Korean Journal of Computational Design and Engineering
• /
• v.18 no.5
• /
• pp.329-337
• /
• 2013

At shipyards, to enable design cooperation with engineering companies or to meet ship owner's requirements, there is a need to translate ship models from one ship CAD system to another ship CAD system. In this paper, a method for translating pipe models from Aveva Marine to SmartMarine3D is introduced. Related data and architecture of translation system are addressed and specific details to be considered during translation are explained. The introduced method has been implemented and tested in a shipyard.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2007.09a
• /
• pp.7-13
• /
• 2007

The purpose of this study is to develop a structural analysis system of LNG pump tower structure. The system affords to build optimized finite element model and analysis procedure of the pump tower structure. The pump tower structure is one of the most important components of LNG (liquefied natural gas) carriers. The pump tower structure is subject to sloshing load of LNG induced by ship motion depending on filling ratio. Three types of loading components, which are thermal, inertia and self-gravity are considered in the system. All these design and analysis procedures are embedded in to the analysis system successfully.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2005.06a
• /
• pp.31-37
• /
• 2005

An attempt to improve the speed performance through the minimizing in wave resistance has been done by an application of gooseneck and no bulb type to bulbous bow for the DSME 78,500 Class LPG Carrier on the basis of the CFD calculation and comparatives model tests. The hydrodynamic characteristics according to the variation of the shape of Cp-curve, design load water line, frame line and bulbous bow that have an important effect on the wave resistance has been evaluated/calculated by ship-flow code. A wide variety in hull variation have been tried to have a good hull form with three types of fore-body hull forms mainly classified by the shape of bulbous bow. The speed performances for the three final hull forms with different bulbous bows have been evaluated through the model tests.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.19 no.2
• /
• pp.127-136
• /
• 2013

Purpose: The aim of the study was to evaluate the effect of self-monitoring of blood glucose (SMBG)-based Diabetes Self-Management Education (DSME) on glycemic control in type 2 diabetes. Methods: This study was designed to compare changes in glycemic control over 12months in SMBG-based DSME group (n=65) versus control group (n=65). Data were obtained from medical records type 2 diabetic patients treated with oral antidiabetic agents and above HbA1c 7.0% from June 2006 to August 2008. All participants completed DSME defined as informational intervention of lifestyle habits and reinforcement of educational Monthly News letter delivered by the diabetes nurse educator. SMBG-based DSME group requested to measure blood glucose 7 times a day for a week and to record their diary and received counseling with a focus on diet and lifestyle during the education. Assessments were conducted baseline, 3, 6 and 12 months. HbA1c was used as an index of glycemic control. Results: 12 months later, the level of HbA1c was reduced by $1.28{\pm}1.68%$ in experimental group and $0.49{\pm}1.05%$ in the control group. We found a significant effect of $Time^*$ Group interaction (p=.013). Conclusion: SMBG-based DSME for patients with type 2 diabetes with oral antidiabetic agents was effective in improving glycemic control and maintaining long-term glycemic control.

• International Journal of CAD/CAM
• /
• v.6 no.1
• /
• pp.41-48
• /
• 2006

Nowadays major shipbuilding companies are trying to expand their business not only to shipbuilding but to offshore projects as well. DSME is one of them. DSME is trying to set up a flexible design and construction environment for shipbuilding and offshore construction in a single shipyard. The shipbuilding and offshore projects, however, have their unique technology but they need to be designed and constructed in one site. To support this new requirement, DSME has developed an integrated CAD system for ship and offshore projects. In this integrated design environment, the designers can design commercial ships and offshore projects in a flexible manner. Concurrent design is very important for ship and offshore design. As compared to the complexity of the product, the design period is quite short. In effect, the design system for the ship and offshore project has to support concurrent design. One essential point of concurrent design environment is a product model based design system. DSME has developed and implemented the 3D product model concurrent design environment based on Tribon M3. Tribon is a widely used CAD system in shipbuilding area that is developed by Tribon Solutions. DSME has both customized the Tribon system and developed in-house application systems to support its own design and production procedures. All the design objects are modeled in one common database to support concurrent design and accurate production. The major in-house development focused on the modeling automation and automatic drawing generation. During the drawing generation process many of the additional production information are also extracted from the 3D product model. In addition, several applications and functionalities have been developed to apply the shipbuilding based Tribon M3 system to offshore projects. The development of shape nesting, tubular connection, isometric drawing, grating nesting systems are the typical.

• Journal of the Society of Naval Architects of Korea
• /
• v.52 no.3
• /
• pp.222-235
• /
• 2015

The purpose of this study is to suggest guidelines for riser fatigue analysis in terms of selection of reasonable analysis method. Three analysis methods (spectral, regular wave, rain-flow counting) are introduced and compared. As the riser systems give non-linear response, the time-domain analysis method is more preferred than frequency-domain analysis method. The spectral fatigue analysis method, however, is still useful for identifying fatigue prone areas. Once stress RAO is established, fatigue damage can be calculated very quickly. The regular wave method and the rain-flow counting method are more time consuming but give more exact results compare to spectral method. In case of regular wave method, a set of regular waves which represent random sea states is considered for dynamic analysis. The rain-flow counting method is the most intuitive and exact method because it refers time history stresses containing most of non-linear effects of the riser system. However, it is not common for early design stage to use rain-flow counting method because of its high cost. In this study, it was confirmed that the regular wave method is the most cost effective way in specific cases. However, if the system is highly non-linear, it seems that the regular wave method gives less accurate results than rain-flow counting method. Therefore, it is imperative that the engineers select appropriate analysis method based on design stage and given engineering period. This paper also discusses the theoretical background of each calculation method and hydrodynamic aspects of marine riser systems. A steel catenary riser (SCR) line on FPSO was considered and marine dynamic program (OrcaFlex) was used for static and dynamic analysis.