• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1747-1749
• /
• 2005

최근 나노입자를 이용하는 광전 화학전지(PEC, Photoelectrochemical)인 염료감응형 태양전지(DSC)의 효율이 증가함에 따라 DSC 태양광 발전 시스템의 성능 개선 또한 요구되어진다. 본 연구에서는 고속 스위칭 소자인 MOSFET와 DSP 마이크로프로세서를 사용한 염료감응형 태양광 발전 시스템용 PWM 인버터의 특성을 Psim을 활용하여 시뮬레이션 하고, 그 결과에 따라 직접 소형 인버터를 제작하여, 동작 특성을 확인하였다.

• Journal of Pharmaceutical Investigation
• /
• v.30 no.3
• /
• pp.201-205
• /
• 2000

Three new polymorphic modifications were prepared by recrystallization under various conditions and characterized by DSC and X-ray crystallography. In pH 4.0 buffer at $37{\pm}0.5^{\circ}C$, the polymorphic modifications showed significant differences in the dissolution rate. The dissolution rate of Mod. 4, amorphous form, was faster than that of marketed cefaclor (Mod. 1). When all modifications were stored at 52% RH, 95% RH and in silica gel desiccator, any polymorphic transformation was not observed.

• Computers and Concrete
• /
• v.29 no.6
• /
• pp.419-432
• /
• 2022

This article deals with the vibrational response of a nanobeam made of bi-directional FG materials which is modeled via nonlocal strain gradient theory along with HSDT. Also, the nanobeam is placed on a Winkler-Pasternak foundation and is under axial mechanical loading. By using the variational energy method, the formulation and end conditions are obtained. Then, DSC-IM, as the numerical solution procedure is employed to extract the results. The material properties of the nanobeam are FG which varies in two directions with in exponential manner. The results from DDN are verified by using other papers. Lastly, a thorough parametric investigation is presented to investigated the effect of different parameters.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.1
• /
• pp.123-127
• /
• 2007

Up sizing of dye-sensitized solar cell(DSC) is the important technology to bring about commercialization of DSC. Several studies to obtain a stable large area DSC have been investigated in overseas laboratories, but have been hardly done in our country. In this study, up sizing technology of dye sensitized solar cells(DSCs) was investigated. We investigated low dark current materials for the current collecting grid. From the result, a new DSC module with metal grid was designed, and fabricated. For a new interconnection, both working and counter electrodes are alternately coupled on 10[cm]$\times$7[cm] substrate. We have achieved 68% of fill factor and photoelectric conversion efficiency of around 2.6% as the best results of new designed DSC structure.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.11a
• /
• pp.673-676
• /
• 2005

To design the effective usage of electric double layer capacitors (EDLCs) used for a storage device of dye sensitized solar cell(DSC) energy, we first investigated the accumulation state of electrical charges and the charge behavior in the EDLCs. Based on the results. the voltage characteristics of EDLCs connected to DSC energy were evaluated. The results showed that the charge accumulation region concentrated on central part of the carbonaceous electrode in EDLCs and the required times for charging and discharging were almost the same.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.4
• /
• pp.23-30
• /
• 2005

The Hygrothermal aging of the laminates of $Avimid^(R)$ K3B/IM7 in $80^{\circ}C$ water was studied as a function of immersion time prior to forming microcracks. The factors causing the $80^{\circ}C$ water to degradation of the laminates could be the degradation of the matrix toughness, the change in residual stresses or the interfacial damage between the fiber and the matrix. The times to saturation in $80^{\circ}C$ water for the laminates and for the neat resin were 100 hours and 500 hours. After 500 hours aging of the neat resin, the glass transition temperature was changed less than 1% by DSC test, and the weight gain was 1.55% increase with the diffusion coefficient $7\times10^{-6}m/s^2$ and the fracture toughness was decreased about 41%. After 100 hours fully saturated aging of the ${[+45/0/-45/90]}_s$ K3B/IM7 laminates in $80^{\circ}C$ water, the weight gain was 0.41% increase with the diffusion coefficient $1\times10^{-6}m/s^2$. In 100 hours, the loss of the fracture toughness of the laminates was 43.8% of the original toughness by the microcracking fracture toughness criterion. Therefore, the main factor to degrade the microcracking toughness of the laminates could be the degradation of the matrix fracture toughness.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.31-34
• /
• 2005

Hygrothermal aging of the laminates of $Avimid^{R}$ K3B/IM7 in $80^{\circ}C$ water was studied as a function of immersion time prior to forming microcracks. The factors causing the $80^{\circ}C$ water to degradation of the laminates could be the degradation of the matrix toughness, change in residual stresses or interfacial damage between the fiber and matrix. The times to saturation in $80^{\circ}C$ water for the laminates and the neat resin are 100 hours and 500 hours. After 500 hours aging of the neat resin in $80^{\circ}C$ water, the glass transition temperature was changed less than $1\%$ by DSC test and the weight gain was $1.55\%$ increase. After 500 hours aging, the fracture toughness of the neat resin was decreased about $37\%$ by 3-point bending test. After 100 hours aging of the [+45/0/-45/90]s K3B/IM7 laminates in $80^{\circ}C$ water, the weight gain was $0.41\%$ increase. The $80^{\circ}C$ water diffusion rate into the neat resin was faster than into the laminates. In 100 hours, the loss of the microcracking toughness of the laminates was $28\%$ of the original toughness by our own microcracking fracture toughness criterion.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.10a
• /
• pp.396-398
• /
• 2012

선박용 AIS를 비롯한 해양교통시설용 AIS, AIS-SART에 대한 내용을 살펴보고 최근 국제적으로 거론되고 있는 다양한 AIS 관련 응용기술과 국제기구의 논의과정을 살펴본다. 이러한 검토를 통해 국내 AIS 관련 기술의 시장과 국내 관련기관에서의 대응책을 모색하고자 한다.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.1
• /
• pp.11-15
• /
• 1996

A series of poly(1,4-phenylene terephthalates) with pendant NLO chromophores was prepared by the solution polycondensation of 2,5-NLO chromophore substituted terephthalic acid with hydroquinone. The polymers obtained gave satisfactory NMR and elemental analysis results when taking into account their expected structures and the inherent viscosity value proved the polymeric character of all polymers. DSC, optical polarizing microscopy and WAXS studies revealed that none of these polymers exhibited liquid crystalline mesophases. Preliminary results on NLO properties of these polymers showed a surprisingly large second harmonic signal relative to a Y-cut quartz plate.

• Korean Journal of Materials Research
• /
• v.10 no.3
• /
• pp.184-190
• /
• 2000

We investigated the effect of filler content on the thermo-mechanical properties of modified ACA composite materials by incorporation of non-conducting fillers and the reliability of flip chip assembly on organic substrates using modified ACA composite materials. For the characterization of modified ACA s composites with different content of non-conducting fillers, differential scanning calorimeter (DSC), and thermo-gravimetric analyzer (TGA), dynamic mechanical analyzer (DMA), and thermo-mechnical analyzer (TMA) were utilized. As the non-conducting filler content increased, CTE values decreased and storage modulus at room temperature increased. In addition, the increase in the content of filler brought about the increase of Tg^{DSC}$ and $Tg^{TMA}$. However, the TGA behaviors stayed almost the same. Contact resistance changes were measured during reliability tests such as thermal cycling, high humidity and temperature, and high temperature at dry condition. It was observed that reliability results were significantly affected by CTEs of ACA materials especially at the thermal cycling test. Results showed that flip chip assembly using modified ACA composites with lower CTEs and higher modulus by loading non-conducting fillers exhibited better contact resistance behavior than conventional ACAs without non-conducting fillers.