• 공업화학
• /
• 제23권3호
• /
• pp.266-270
• /
• 2012

무수물인 4,4'-(hexafluoroisopropylidene)diphthalic anhydride (6FDA)에 2,2'-bis(trifluoromethyl)benzidine (TFB), 2,2'-bis(3-aminophenyl)hexafluoropropane (BAFP), 2,2'-bis(3-amino-4-methylphenyl)hexafluoropropane (BAMF), bis(3-aminophenyl) sulfone (APS), p-xylyenediamine (p-XDA), 및 m-xylyenediamine (m-XDA) 등 6종류의 각각 다른 아민 단량체를 이용하여 폴리이미드(PI) 필름을 제조하였다. 얻어진 무색 투명한 PI필름은 무수물과 아민을 반응시켜 폴리아믹산(PAA)을 합성한 후, 용액 캐스팅에 의한 열처리 과정을 통해 얻었다. Differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), thermo-mechanical analysis (TMA)를 이용하여 열적 성질을 측정하였고, universal tensile machine (UTM)을 이용하여 기계적 성질을 조사하였으며, 자외선/가시광선 분광광도계(UV-vis.)와 색차계를 이용하여 광학적 성질을 각각 확인하였다. 제조된 모든 필름들은 무색 투명하여 0.98~2.76 사이의 노란색 지수를 보였으며, 25.73~55.23 $ppm/^{\circ}C$사이의 열 팽창 계수를 나타냈다.

• 대한기계학회논문집A
• /
• 제35권9호
• /
• pp.999-1005
• /
• 2011

고무복합재료에 대해 변형에 의한 결정화(SIC)가 기계적 특성에 미치는 영향을 연신율(${\lambda}$) 및 다중벽 탄소나노튜브(CNT)와 카본블랙(CB)의 함유량을 함수로 하여 연구하였다. 시차 주사 열량(DSC) 분석을 통해 CB 및 CNT의 함유량에 따라 결정화 정도가 증가함을 확인 하였다. 또한 연신율이 증가함에 따라 복합재료의 유리전이온도(Tg)는 증가하였고, 결정화 잠열 값(LHc)은 ${\lambda}$=1.5에서 최대값을 보였다. CNT의 함유량 증가에 따라 기계적 특성과 LHc는 비례관계임을 확인하였다. 열 중량 분석(TGA)을 통해 기지의 소실율은 94.3%였고, 복합재료의 소실율은 보강재의 함유량 증가에 따라 감소하였다. 인장탄성율 비는 고무 내의 CNT 배향으로 인장강도 비보다 높게 나타났다.

• 폴리머
• /
• 제36권1호
• /
• pp.9-15
• /
• 2012

용융법을 이용해서 말단에 가교 반응이 가능한 메틸 말레이미드(methyl maleimide)기를 가진 전방향족 에스터 결합의 액정(liquid crystal, LC)을 합성하였고, 합성된 LC를 이용해서 적당한 열처리 과정을 통해 열경화성 액정(liquid crystalline thermoset, LCT) 필름을 제조하였다. 합성된 LC 및 LCT 필름은 FTIR(Fourier transform infrared) 분광기, WAXD(wide angle X-ray diffraction), DSC(differential scanning calorimetry), TGA(thermogravimetric analysis), TMA(thermomechanical analysis), 그리고 가열판이 장착된 편광 현미경으로 특성 분석을 하였다. 유리전이온도($T_g$)와 열팽창 계수는 주사슬 구조의 메소겐에 의해 강한 영향을 받는 것으로 확인되었고, $para$-로 치환된 비페닐구조를 가진 LCT 필름이 가장 좋은 열적 성질을 보여 주었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.272-276
• /
• 2001

Multicomponent $Zr_{41.2}Ti_{13.8}Cu_{12.5}Ni_{10}Be_{22.5}$ bulk matallic glass alloy shows good bulk glass forming ability due to its high resistance to crystallization in the undercooled liquid state.1) In this study, DSC and X-ray diffractometry have been performed to confirm the amorphous structure of the master $Zr_{41.2}Ti_{13.8}Cu_{12.5}Ni_{10}Be_{22.5}$ alloy. To investigate the mechanical properties and deformation behaviors of the bulk metallic $Zr_{41.2}Ti_{13.8}Cu_{12.5}Ni_{10}Be_{22.5}$ alloy, a series of compression tests has been carried out at the temperatures ranging from $351^{\circ}C$ to $461^{\circ}C$ and at the various initial strain rates from $2{\times}10^{-4}s^{-1}\;to\;2{\times}10^{-2}s^{-1}$. There are two types of nominal stress-strain curves. The one shows linear stress-strain relationship meaning fracture at maximum stress, the other shows plastic deformation including steady-state flow. Also DSC analysis for the compressed specimens has been performed to investigate the change of thermal stability and crystallization behavior for the various test conditions.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.226-231
• /
• 2001

The purpose of this paper is to propose the experimental method of thermal properties of Phase Change Materials (PCMs) by using T-history method. As far, in order to measure the heat of fusion and specific heat of PCMs, conventional thermal analysis methods such as DSC and DTA have been used. Because these methods test very small samples, thermal properties of samples are usually different from those of materials consisting of several components. For these reasons, T-history method, the simple measurement method of the heat of fusion and specific heat of PCMs have been performed. In this paper, we investigated the thermal properties of low temperature PCMs(below $0^{\circ}C$) under the charging process by using T-history method. The results are compared to those of DSC method. The T-history method will be useful for selection of the best PCM from lots of candidates and development of new PCMs.

• 한국식품과학회지
• /
• 제29권1호
• /
• pp.96-100
• /
• 1997

식빵을 직접반죽법에 따라 제조하면서 원료의 혼합공정에 carboxymethyl chitosan (CMC)를 처리하여 제품의 품질수명을 연장시키는데 미치는 영향요인 중 노화도, 항균성 및 관능적 특성, 수분활성도를 조사한 결과는 다음과 같았다. CMC로 처리한 처리구 C-I과 C-II는 대조구 C-0에 비하여 노화가 지연되었으며, 특히 빵의 저장 중 부패의 원인이 되는 Aspergillus, Penicillium 등과 같은 곰팡이의 생육을 억제시켰다. 또한 평점법에 따라 관능검사를 실시한 결과 향, 이취, 전체적인 기호도는 저장기간동안 유의적인 차이를 나타내지 않았으나, 조직감은 C-0와 C-II 처리구 간에는 5%수준에서 유의적인 차이를 보였다.

• 한국의류학회지
• /
• 제12권3호
• /
• pp.343-350
• /
• 1988

This study was carried out to investigate the microstructure and physical property of PET POY which was taut-annealed under various conditions. The DSC melting curves of annealed PET POY showed double melting peaks in most cases. As temperature and time increased, form II crystal became sharp and increased in size, and form I crystal decreased in size. The slower the heating rate, the higher the programmed heating effect during DSC analysis. Crystallinity and briefringence of annealed specimens increased as the treatment temperature and time increased. Breaking tenacity of specimens treated for 3 minutes increased as the treatment temperature increased, but others decreased. Elongation at break decreased as the annealing temperature and time increased. Dye uptake of annealed specimens decreased as the temperature increased up to $190^{\circ}C\~210^{\circ}C$. then the uptakes increased at higher temperatures. At the same temperature, dye uptake of the specimen decreased as time increased.

• 폴리머
• /
• 제34권3호
• /
• pp.261-268
• /
• 2010

본 연구에서는 상전이 온도가 36 $^{\circ}C$인 n-eicosnae을 열가소성 폴리올레핀 고분자인 폴리프로필렌과 블렌드하였으며, 또한 최근의 형태안정성 PCM(SSPCM)의 연구검토를 통하여 폴리프로필렌과 n-eicosnae의 특성과 잠열저장체로서의 적용 가능성을 확인하였다. 상전이 온도가 36 $^{\circ}C$인 n-eicosane과 폴리프로필렌을 멜팅방법과 흡수방법을 이용하여 시료를 제조하였다. 제조된 형태안정성 PCM(SSPCM)을 DSC, WAXD, FTIR spectroscopy, ARES로 분석결과 형태안정성, 열용량의 향상을 확인하였다.

• 한국염색가공학회지
• /
• 제19권1호
• /
• pp.24-30
• /
• 2007

Heat storage/release system in textile is a useful tool to increase energy efficiency and enhance comfortable microclimate of clothing. Phase change materials(PCM) are used in regulating storage and release properties of thermal energy. To investigate the temperature regulating ability of fabrics with PCM microcapsule(PCMMc), Nylon fabrics were coated with PCMMc via wet processing and they were characterized by SEM, DSC and infrared thermal analyzer. Also, water moisture transpiration, water penetration resistance, peel strength and washing durability of the fabrics were assessed. The water vapor permeation and water penetration resistance decreased with increasing PCMMc content. In DSC analysis, it can be seen that the microencapsulated fabric showed both exothermic md endothermic phenomena at specific temperature. Peel strength was decreased with increasing PCMMc content.

• 한국멀티미디어학회논문지
• /
• 제23권3호
• /
• pp.468-475
• /
• 2020

In this paper, we proposed a three-dimensional visualization system for medical images in augmented reality based on deep learning. In the proposed system, the artificial neural network model performed fully automatic segmentation of the region of lung and pulmonary nodule from chest CT images. After applying the three-dimensional volume rendering method to the segmented images, it was visualized in augmented reality devices. As a result of the experiment, when nodules were present in the region of lung, it could be easily distinguished with the naked eye. Also, the location and shape of the lesions were intuitively confirmed. The evaluation was accomplished by comparing automated segmentation results of the test dataset to the manual segmented image. Through the evaluation of the segmentation model, we obtained the region of lung DSC (Dice Similarity Coefficient) of 98.77%, precision of 98.45%, recall of 99.10%. And the region of pulmonary nodule DSC of 91.88%, precision of 93.05%, recall of 90.94%. If this proposed system will be applied in medical fields such as medical practice and medical education, it is expected that it can contribute to custom organ modeling, lesion analysis, and surgical education and training of patients.