Park, Min-Seo;Kim, Ji-Yeong;Baek, Du-Hyeon;Sim, Yeong-Jun;Lee, Bo-Ryong
Proceedings of the Korean Institute of Surface Engineering Conference
/
2012.05a
/
pp.326-326
/
2012
현재 자동차 강판 시장은 이산화탄소 저감과 승객의 안전확보를 위하여 고장력강을 요구하고 있는 추세이며, 강도와 성형성을 동시에 확보하기 위하여 DP, TRIP강과 같은 변태강화형 강판을 선호한다. 그러나 강판의 상분율을 제어하기 위해서는 Si, Mn등과 같은 합금원소를 필요로 하게 되며 강판의 생산공정 중 이들 합금원소는 강판의 표면에 산화물로 농화되어 아연도금 특성을 크게 저하시키는 결과를 초래한다. 따라서 본 연구에서는 냉연 아연도금강판의 생산 공정을 모사하고 이들의 산화물 구조를 분석하여 도금특성에 어떠한 영향을 미치는지 고찰하고 Ni-precoating 공정을 이용하여 강판의 도금성 개선의 가능성을 제시하였다.
We analyzed a time series composed of the annual precipitations of Seoul based on the measurements of a Korean raingage and a modern raingage. The precipitations measured with a Korean raingage for the period of 1771 to 1907 are followed by the precipitations with a modern raingage for the period of 1908 to 1990. The latter part of the time series of annual precipitations were obtained from a book for annual precipitations of Korea by Korea Meteorological Administration and the former from Wada's table 1 for monthly precipitations reproduced from the daily rainfall measurements by a Korean raingage for the period of the Yi Dynasty. In our analysis three different precipitation regimes clearly stand out of the entire period. In order to define objectively the period of each precipitation regime we made a time series of 9 year moving averages from the above time series. By taking into account the shapes of the moving average time series and by using a threshold value of annual precipitation 1050 mm, we defined three precipitation regimes of wet period 1(WP1), dry period (DP), and wet period 2 (WP2). The WP1 and WP2 show very similar characteristics in out statistical analyses. On the other hand, DP is very different from the two periods in many statistical aspects. The strong similarities of the WP1 and WP2 regimes in the magnitudes of statistical parameters and in the shapes of their power spectrum distribution are supporting very positively the soundness of precipitation amounts measured with a Korean raingage in spite of numerous conceivable errors which might have been introduced into measurements of precipitation due to changes of observation site and environment, the scale of units employed, and urbanization of Seoul, etc. However, the annual precipitation amounts are not enough to examine throughly the characteristic of precipitation variations during the two regimes. It is definitely necessarly to recover the daily amounts of precipitation, based on two or three times measurements of rainfall with a Korean raingage, scattered in various ancient documents such as the official diary of 'Seungjeong-weon'
Journal of the Korea institute for structural maintenance and inspection
/
v.28
no.2
/
pp.35-42
/
2024
This study evaluated the buildability and mechanical properties of 3DP concrete printed in air and underwater environments. Buildability was evaluated by green strength test on fresh concrete and height and deflection immediately and 1 hour after printing. The green compressive strength of the concrete was 5.0 kPa after 30 minutes and 7.9 kPa after 3 hours, an increase of 1.6 times the initial strength. The total height of the laminated parts met the design height regardless of the printing environment. The amount of deflection in air and under water 1 hour after printing was 1 mm and 0.2 mm, respectively, indicating a small amount of deflection under water. The apparent density of the sample appeared in the order of A-M > A-P > UW-P. This is believed to be because a large amount of air is mixed into the concrete during the printing process, and water infiltrates during the underwater printing process. The compressive strength ratio of UW-P/A-P was 0.86 at 1 day, but the compressive strength of the underwater printed concrete was high from 7 days.
An, Ju-Seon;Lee, Kyung-Won;Kim, Jong-Hyun;Lee, Bo-Young
Proceedings of the Computational Structural Engineering Institute Conference
/
2010.04a
/
pp.628-631
/
2010
환경문제에 대한 관심으로 자동차에 대한 경량화가 요구되는 동시에 안전규제가 강화 되고 있어, 높은 인장강도를 가지는 고강도 강의 차체 적용 비율이 점차 증가하고 있다. 또한, 자동차 1대를 조립하기 위한 저항 점용접 횟수를 줄이고, 용접부에 충격안정성을 확보하기 위한 관심이 고조되고 있다. 따라서, 국내 자동차 산업에서 용접부의 신뢰성을 보장하기 다양한 비파괴 검사를 적용하고 있으며, 생산 공정에 적용하고 있다. 그중에서 용접 전극 사이에서 동저항(Dynamic resistance, 용접 공정중모재의 저항값의 변화)을 계측하여 용접성을 평가하는 방법이 제시되고, 차체 조립공정 중에 적용하려는 시도가 이루어지고 있다. 본 연구에서는 자동차 차체용 냉간 압연강판(590MPa dual-phase steel)을 인버터 DC 저항 점 용접하여, 용접전극 사이에서 동저항을 측정 하였다. 용접성은 인장전단 강도로 평가하였고, 용접 공정 변수는 용접 전류, 용접 시간, 가압력을 선정하였다. 동저항 그래프의 ${\alpha}$-peak와 ${\beta}$-peak값을 인장전단 강도에 따라 회귀 분석하여, 동저항에 따른 인장전단 강도를 예측하였다. 추가적으로, 용접부의 외관 형상 중에 압흔 깊이와 압흔자국 지름에 대한 회귀분석을 실시하였으며, 용접부 형상에 대한 신뢰성을 부여하였다.
Questo studio ha lo scopo di configurare la gerarchia tematica del sintagma genitivale in italiano all'interno della struttura sintattica. Il sintagma genitivale composto dalla forma "sostantivo+di+sostantivo", può avere i significati di descrizione, origine, apposizione, parte, luogo, e anche può rappresentare la struttura argomentale come argomento esterno(caso soggettivo) o argomento interno(caso oggettivo) e può assegnare il ruolo tematico di agente, tema, esperiente, beneficario in relazione al rapporto con la testa nominale oltre ad avere il significato possesivo. Per quanto riguarda la realizzazione e il significato dell'argomento nel sintagma genitivale diverse che cambiano secondo il tipo della testa nominale, ho classificato i nomi deverbali come nomi monoargomentali, nomi biargomentali, nomi triargomentali sulla base di Renzi et al(1991). Inoltre avendo confermato che il marcatore del caso genitivale di deve esserci nel caso in cui obbligatoriamente la struttura del sintagma nominale composto dai vari livelli, come NP, FP e DP, proposti da Longobardi(2001) per spiegare la differenza semantica del sintagma genitivale con la struttura sintattica, ho cercato di individuare l'ordine degli argomenti, osservando l'ambiguità e il cambiamento del significato del sintagma genitivale nel sintagma nominale. Cioé la differenza della possibilità interpretativa è una cosa strutturale, quindi possibilmente si può configurare la semantica del sintagma genitivale nella struttura sintattica.
Journal of the Institute of Electronics Engineers of Korea SP
/
v.44
no.6
/
pp.100-110
/
2007
When compressed video data is transmitted over error-prone network such as wireless channel, data is likely to be lost, so the quality of reconstructed picture is severely decreased. It is specially so in case that important information such as motion vector or macroblock mode is lost. H.264/AVC standard includes DP as error resilient technique for protecting important information from error in which data is labeled according to its relative importance. But DP technique requires a network that supports different reliabilities of transmitted data. In general, the benefits of UEP is sought by sending multiple times of same packets corresponding to important information. In this paper, we propose MDC technique based on data partitioning technique. The proposed method encodes motion vector of H.264/AVC standard into multiple parts using MDC and transmits each part as independent packet. Even if partial packet is lost, the proposed scheme can decode the compressed bitstream by using estimated motion vector with partial packets correctly transmitted, so that achieving improved performance of error concealment with minimal effect of channel error. Also in decoding process, the proposed multiple description matching increases the accuracy of estimated lost motion vector and quality of reconstructed video.
This study aims at the development of a technique for the optimal water allocation by applying Dynamic Programming Model for the effective usage and rational allocation of water resources, in case of which limited water resources in river basin should be used in several stages. In analytical procedure the possible allocable area was firstly zoned into the four areas: Pohang area ($C_1$), Yeungcheon area ($C_2$), Gyeungsan area ($C_3$), Daegu area ($C_4$), which are located between the Yeongcheon dam and the confluence of the lower Kumho river and the main course of the Nakdong river. Secondly, a return function was determined on the basis of the correlation between the GRP in each area and the amount of water used to it. A DP Model, finally, was applied to the allocation of the water resources according to both their usage and the areas. As a result, the fact has been found that when allocating by the area, $C_1$ could be possibly supplied only with the water resources avaiable from the Yeungchon dam, and the maximum units supplied to $C_1$ should be 240 units ($1unit=10^3㎥$ per day), beyond which we ought to develop an alternative water resources. Also, the return from the allocation by the usage exceeded the one from it by the area. At the same time it was more profitable to limit the water supply to $C_1$ into 217 units. In the allocation by the area 240 units and 80 units, if only the water resources available from the Yeungcheon dam used, and 360 units and 80 units if the Doil dam used additionally, could be supplied to $C_1$ and the lower region respectively. In the allocation by the usage 103 units for industrial water with 33 units for both domestic and commercial water and 183 units, if only the water resources available from the Yeungcheon dam used, and 103 units with 33 units and 304 units, if the Doil dam taken into consideration additionally, could be supplied to $C_1$ and the lower region respectively. Therefore, much more water could be allocated to the region of lower Kumho river if the method of water allocation by the usage.
최근 자동차에서 경량화의 방안으로써 높은 강성을 요구하는 고장력강 사용이 증대 되고 있다. 그러나 고장력강은 저항 점용접 시 일반 강에 비해 높은 전류를 요구하며 계면파단 및 expulsion 발생이 용이하기 때문에 가용 전류 구간이 좁은 특성을 가진다. 많은 연구자들이 hold time, tempering 등의 process를 이용하여 고장력강의 저항 점용접성을 개선하고자 하였으나 생산 공정라인에 적용하기는 어려운 실정이다. 본 연구에서는 용접 공정 변수의 변화에 따른 용접성과 전극 형상 변화을 통한 고장력강 점 용접성 향상에 대한 연구를 실시 하였다. 고장력강의 점 용접성 비교하기 위해 표준 전극(S1)과 인위적으로 가공한 전극(M1)을 사용하였으며, 실험에 사용된 판재는 두께 1.4mm의 DP590이며, 그 결과 표준전극(S1) 보다 가공 전극(M1)의 가용 전류 구간이 0.5kA 정도 넓은 것으로 확인 되었다. 두 전극을 사용한 점용접 시험편들의 인장전단강도를 비교 해보면 표준전극(S1)을 적용한 점용접 시 인장전단강도는 KS B 0850 기준에 만족하나 계면 파단이 발생 하였다. 가공 전극(M1)을 적용한 점용접 시 인장전단강도는 규격 기준에 만족하나 버튼 파단이 발생 하였다. 두 전극을 적용한 점용접부 형상 및 용접부 온도 분포에대해 저항점용접 시뮬레이션 프로그램(SORPAS)을 이용하여 실험 결과 값과 비교 분석하였고 파단모드의 변화에 대한 원인 분석을 도출 하였다.
Hae Jin Shin;Hyun Yong Jeong;Hee Seok Moon;Jae Kyu Sung;Sun Hyung Kang
Journal of Digestive Cancer Research
/
v.4
no.2
/
pp.122-126
/
2016
Leptomeningeal carcinomatosis occurs in approximately 5% of patients with cancer. The most common cancers involving the leptomeninges are breast, lung cancer and melanoma. However, gastric adenocarcinoma has been rarely reported with leptomeningeal carcinomatosis. The presenting manifestations are usually headache, visual disturbances and seizures. We report a case of leptomeningeal metastasis that presented as a gastric cancer. A 75-year old man was transferred to our hospital for further evaluation and treatment after being diagnosed with adenocarcinoma through endoscopic biopsy during a regular health examination. An abdominal computed tomography (CT) showed AGC, stage IA (cT1N0M0), while an endoscopic examination showed AGC, Borrmann type 2. The patient is currently under observation after undergoing radical subtotal gastrectomy with gastroduodenostomy and subsequent administration of oral chemotherapeutic agents. As an abdominal CT response assessment performed after surgery revealed new metastasis to the liver, the patient received palliative chemotherapy as recurrence was suspected. After receiving chemotherapy in the order of DP (Cisplatin + Docetaxel), FOLFIRI (5-FU + Leucovorin + Irinotecan), an abdominal CT response assessment showed complete response. Since decreased mentality maintained throughout the follow up period based on outpatient clinic, brain MRI was performed and revealed multiple leptomeningeal metastasis. The Patient died 2 days after the diagnosis.
Journal of the Korean Association of Oral and Maxillofacial Surgeons
/
v.36
no.3
/
pp.186-196
/
2010
Introduction: The first aim of this study was to isolate the dental tissue-derived stem cells from the dental follicle (DF), dental pulp (DP), and root apical papilla (RAP) of the extracted wisdom teeth. Second was to evaluate their characterization with the expressions of transcription factors and cell surface markers. Finally, their ability of the in vitro multi-lineage differentiations into osteogenic and adipogenic cells were compared, respectively. Materials and Methods: Dental tissues, including dental follicle, dental pulp, and root apical papilla, were separated in the extracted wisdom teeth. These three dental tissues were cultured in Dulbecco’s modified Eagle’s medium (DMEM) with supplements, respectively. After passage 3, the homogeneous shaped dental tissue-derived cells were analyzed the expression of transcription factors (Oct-4, Nanog and Sox-2) and cell surface markers (CD44, CD90 and CD105) with reverse transcription polymerase chain reaction (RT-PCR) and fluorescence-activated cell sorting (FACS) analysis. In order to evaluate in vitro multi-lineage differentiations, the culture media were changed to the osteogenic and adipogenic induction mediums when the dental tissue-derived cells reached to passage 3. The characteristics of these three dental tissue-derived cells were compared with immunohistochemistry. Results: During primary culture, heterogenous and colony formatted dental tissue-derived cells were observed in the culture plates. After passage 2 or 3, homogenous spindle-like cells were observed in all culture plates. Transcription factors and mesenchymal stem cell markers were positively observed in all three types of dental tissue-derived cells. However, the quantity of expressed transcription factors was most large in RAP-derived cells. In all three types of dental tissue-derived cells, osteogenic and adipogenic differentiations were observed after treatment of specific induction media. In vitro adipogenic differentiation was similar among these three types of cells. In vitro osteogenic differentiation was most strongly and frequently observed in the RAP-derived cells, whereas rarely osteogenic differentiation was observed in the DP-derived cells. Conclusion: These findings suggest that three types of human dental tissue-derived cells from extracted wisdom teeth were multipotent mesenchymal stem cells, have the properties of multi-lineage differentiations. Especially, stem cells from root apical papilla (SCAP) have much advantage in osteogenic differentiation, whereas dental follicle cells (DFCs) have a characteristic of easy adipogenic differentiation.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.