• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2002년도 봄 학술발표회 논문집
• /
• pp.359-362
• /
• 2002

이산화탄소($CO_2$)를 사용한 셀룰로오스 카보네이트 유도체의 제조 및 재생 셀룰로오스 섬유 제조와 관련한 기초 연구성과를 이미 발표한 바 있다[1~4]. 이번 연구에서는 일정한 조건에서 제조된 셀룰로오스 카보네이트 유도체를 10 wt% NaOH 수용액계에 용해시켜 방사용액(spinning dope)을 제조하고 일욕의 습식 방사장치를 이용하여 재생 셀룰로오스 섬유를 제조하였다. 이때 사용된 응고욕으로 황산, 초산, 인산 수용액계를 사용하였으며 제조된 각각의 재생 셀루로오스 섬유에 대해 물성분석을 하였다. (중략)

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.31.1-31.1
• /
• 2011

$Li_4Ti_5O_{12}$ is emerging as a promising material with its good structure stability and little volume change during the electrochemical reaction. However, its electrochemical performance is significantly limited by low electronic or ionic conductivity. In addition, high tap density is needed forim proving its volumetric energy density and commercialization. To enhance these properties, the spherical-like $Li_4Ti_5O_{12}$ particles were synthesized and carried out doping with yttrium. Prepared Y-doped $Li_4Ti_5O_{12}$ as a anode material showed great capacity retention rate of 92% (5C/0.2C), compared with no dope done. Consequently, it was found that Y doping into $Li_4Ti_5O_{12}$ matrix reduces the polarization and resistance on SEI layer during the electrochemical reaction.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권6호
• /
• pp.1203-1210
• /
• 2001

This study was carried out to develop an engine for off-road vehicles especially for farm tractors using the liquefied petroleum gas (LPG) which is known as a source of energy having good potential of substitute fuel for diesel engine because of its economical advantage and low pollutant materials after combustion. The study was focused on develop an engine of high in specific power output, low in specific fuel consumption and emission of pollutants. A series of teat was dope on the engine - various laboratory tests to analyze performance of the engine and actual field tests with the engine installed on a farm tractor as a power source.

• Membrane and Water Treatment
• /
• 제5권1호
• /
• pp.41-56
• /
• 2014

A series of microporous PVDF membranes were prepared by isothermal immersionprecipitation of PVDF/TEP casting dopes in both soft and harsh coagulation baths. Morphologies of the membranes' top surfaces were found to depend strongly on the bath strength, which could be controlled by the TEP content in the bath. By changing the bath gradually from pure water to 70% TEP, the top surface evolved from a dense skin-like (asymmetric) to a totally open porous morphology (symmetric). The latter structure could similarly be obtained by precipitation of the same dope in an alcoholic bath, e.g., 1-butanol. Membrane distillation processes to desalt sodium chloride aqueous solutions were conducted using various prepared membranes and two commercial microporous membranes, PTFE (Toyo, Japan, code: J020A330R) and PVDF (GE, USA, code: YMJWSP3001). The permeation fluxes were compared and correlated with the morphologies of the tested membranes.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2002년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2
• /
• pp.427.2-428
• /
• 2002

Previously we formulated new cationic liposomes, DDC, composed of DOTAP. DOPE, and cholesterol (Chol) in 1 : 0.7 : 0.3 molar ratios, and showed that DDC efficiently deliver the plasmid DNA into ovarian cancer cell lines. Here, wild type p53 DNA was transfected into ovarian cancer cells, using the DOC as a nonviral vector and the expression and activity of p53 gene were evaluated in vitro and in vivo. The complexes of plasmid DNA (pp53-EGFP) and DDC were transfected into OVCAR-3 cells. The gene expression was determined by RT -PCR and western blot analysis. (omitted)

• 멤브레인
• /
• 제3권3호
• /
• pp.117-125
• /
• 1993

셀룰로오스 아세테이트(CA) 소재로 역삼투막을 제조하여 각종 제막조건에 의한 막성능에 미치는 영향인자를 조사하였다. 제막 용액조성으로 CA, formamide, acetone과 2-methoxyethanol을 사용하여 평판형 막을 만들고, 투과유속 및 배제율을 측정하였다. 특성 측정 인자로서 고분자 농도, 증발시간, 열처리 온도 및 처리 시간, 조작압력, 공급액의 농도 등을 변화시켜 막에 대한 영향을 연구하였다. 또한 제조된 막을 사용하여 역삼투 모델식에 적용하여 각각의 파라메타를 계산하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.261-261
• /
• 2010

In electric railways, high speed trains are normally supplied by AC 25kV power by contact between a pantograph contact strip and a contact wire. Advanced railway operating countries are actively researching various areas for the development of contact strips due to the reason that the properties of contact strips are one of the key factors of electric railways. This paper applied nano technology which is rapidly growing in many areas to the contact strip of a pantograph for current collection performance improvement considering speed up of electric railways. In detail, this paper proposes a method to dope nano particles of metal to a Korea Train eXpress(KTX) carbon pantograph and its measurement results. It is expected that the contents of this paper be used for preliminary study of high-speed railway current collection technologies.

• 한국염색가공학회지
• /
• 제14권2호
• /
• pp.109-109
• /
• 2002

A study has been made of the dry-jet-wet spinning of PAN copolymer fibers using 60% aqueous zinc chloride solution as solvent and 25∼40% aqueous zinc chloride solution as non-solvent. The technological characteristics of this method were that small streams of dope were extruded from the die and allowed to pass through a short distance of air gap(about 10mm) before entering the spinning bath for full coagulation. This work showed the importances which coagulation condition, stretch ratio and fiber tenacity up to 10.5 g/d could be obtained with elongation of 11∼16%. Individual fibers were evaluated on the basis of density and mechanical properties such as tenacity and elongation etc.

• 한국염색가공학회지
• /
• 제14권2호
• /
• pp.33-39
• /
• 2002

A study has been made of the dry-jet-wet spinning of PAN copolymer fibers using 60% aqueous zinc chloride solution as solvent and 25∼40% aqueous zinc chloride solution as non-solvent. The technological characteristics of this method were that small streams of dope were extruded from the die and allowed to pass through a short distance of air gap(about 10mm) before entering the spinning bath for full coagulation. This work showed the importances which coagulation condition, stretch ratio and fiber tenacity up to 10.5 g/d could be obtained with elongation of 11∼16%. Individual fibers were evaluated on the basis of density and mechanical properties such as tenacity and elongation etc.

• Fibers and Polymers
• /
• 제7권3호
• /
• pp.250-254
• /
• 2006

Superfine down-powder/viscose blend films were prepared and characterized for their dyeing properties. Down-powder with average size of $2.56{\mu}m$ were suspended in viscose dope and blend films were obtained by solution casting. When the blend films were dyed with acid dye, the dye uptake and K/S values increased with the increase in down-powder content. Amino-acid analyses showed that amino acid component of the down were not affected during the film formation, which confirmed the changes of dye uptake and K/S value.