• Transactions of Materials Processing
• /
• v.21 no.2
• /
• pp.101-106
• /
• 2012

Generally, rapid cure reaction of LED encapsulation silicone resin causes serious defects in cured resin products such as warpage, residual bubbles, and reduced wettablility. In order to prevent residual bubbles in silicone resin, the step cure process was examined in the present paper. Three kinds of step cure processes were applied, and bubble-free phenomenon was observed. Most of the bubbles were removed under $70^{\circ}C$, the minimum temperature for activating cure reaction. In addition, degree of cure(DOC) and temperature distribution were predicted by using FEM analysis of heat transfer. It was concluded that maintaining cure temperature which provide a DOC under 0.5~0.6 effectively reduces residual bubbles.

• Journal of Environmental Health Sciences
• /
• v.33 no.5
• /
• pp.441-450
• /
• 2007

본 연구는 humic acid 및 bromide를 함유한 상수 원수에 오존 처리를 수행함에 있어 수질 특성 및 공정조건에 따른 bromate 및 formaldehyde 의 생성을 고찰하였다 . 회분식 실험장치를 이용하여 오존의 주입농도, DOC 농도, bromide 농도, pH, 알칼리도 및 반응 시간을 변화시키면서 오존처리 시 생성되는 대표적인 부산물인 bromate 및 formaldehyde의 거동을 파악하였다. 본 연구에서 검토된 영향 인자 중 수중의 pH조건은 bromate 및 formaldehyde의 생성에 가장 중요한 인자로 나타났다. DOC(dissolved organic carbon) 농도가 증가할수록 bromate 생성은 감소하였고 formaldehyde 의 생성은 증가하였다. 오존처리를 통해 UV254 는 효율적으로 감소되었고, UV254의 감소율 및 오존 농도는 선형 관계를 나타냈다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.1
• /
• pp.95-100
• /
• 2012

A deck crane is installed on the deck of a ship when there is no adequate facility for loading and unloading in dock or harbor. Deck cranes in Korea have been imported from abroad, and the import-substitution effect will arise if its production can be localized. Now, it is required to suggest the structural design of a deck crane that meet the domestic criterion, considering loading condition. In this study, the structural analysis of a pedestal in the deck crane was peformed by finite element method to investigate the strength requirement. In addition, the structural design of a pedestal was suggested by using ANSYS and VisualDOC. The optimized structure of a pedestal was determined, considering lightweight design.

• Journal of environmental and Sanitary engineering
• /
• v.12 no.1
• /
• pp.69-75
• /
• 1997

Biological drinking water treatment is widely used in Europe for the removal of ammonia nitrogen and organics. During the last 16 years, the deterioration of the quality of surface waters used to produce drinking water has resulted in the widespread use of ozone-biological treatment in Korea. This study were conducted to determine the effect of media weight and preozonation on the biodegradability enhancement in biological fluidized bed(BFB) using Han river water. When the carbon weight was increased, $NH_{3}-N$ and DOC removal increased, but turbidity and SS removal decreased. To remove turbidity and SS, the bed depth in 40% expansion rate/total bed depth was very important. Preozonation of raw water was not effective in $NH_{3}-N$, but increased in biodegradable organic fraction about 10-30% with 0.425-0.85 mg $O_{3}/mg$ DOC.

• Journal of Industrial Technology
• /
• v.26 no.A
• /
• pp.199-205
• /
• 2006

Ozone alone and catalytic ozone processes were introduced for treatment of humic acid, which is representative refractory organic compound. The treatment efficiencies of humic acid in each process were analyzed in pH variation, DOC removal, and $UV_{254}$ decrease. Mn loaded GAC catalyst was prepared by loading potassium permanganate onto the granular activated carbon surface. BCM-GAC and BCM-Silica gel catalyst were prepared by BCM. $UV_{254}$ decrease in all processes was comparatively high with efficiency over 87%. DOC removal in ozone/GAC process was the highest with 78%, and removal rates for other processes followed the order ozone/BCM-GAC(62%) > ozone/BCM-silica gel(45%) > ozone/silica gel(43%) > ozone/Mn Loaded GAC(42%) > ozone alone(37%).

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.6
• /
• pp.539-544
• /
• 2013

This study provides a solution method for the inverse heat conduction problem based on a combination of a public domain CAE (computer aided engineering) software and a commercial CAO (computer aided optimization) software. The solver system has been implemented without any in-house coding. The proposed method is simple to implement. Moreover, it can be easily reproduced.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.248-254
• /
• 2012

During the monolayer assembly of zeolite microcrystals using sonication with stacking (SS) method, the factors that govern the degree of close packing (DCP) between the microcrystals, the rate of attachment (rA) of microcrystals onto the substrate, the degree of coverage (DOC), and the binding strength (BS) between each crystal and the substrate were investigated for each mode of binding linkage (MBL). The tested MBLs were covalent linkage (CL), ionic linkage (IL), and polyelectrolyte-mediated ionic linkage (p-IL). Unlike the monolayers of zeolite crystals assembled on glass with a covalent linkage, the strong BS, very high DOC, and very high DCP do not decrease during monolayer assembly on glass through ionic linkages. This results indicate that the surface migration of crystals undergo linkage-nondestructively when crystals were attached to the substrates through ionic linkages.

• Journal of Industrial Technology
• /
• v.27 no.A
• /
• pp.25-29
• /
• 2007

Ozone alone, Ozone/GAC, Ozone/$H_2O_2$ and Ozone/GAC/$H_2O_2$ processes were introduced for treatment of humic acid, which is a representative refractory organic compound. $H_2O_2$ and GAC used as catalysts for experiment. The treatment efficiencies of humic acid in each process were analyzed for pH variation, DOC removal, and $UV_{254}$ decrease. $UV_{254}$ decrease in Ozone/GAC and Ozone/GAC/$H_2O_2$ processes were the highest with about 93%, and Ozone alone and Ozone/$H_2O_2$ processes were 88%. DOC removal in Ozone/GAC/$H_2O_2$ process was the highest with 71%. Removal by Ozone/GAC, Ozone alone, and Ozone/$H_2O_2$ processes were 66%, 39%, and 47%, respectively.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.10a
• /
• pp.166-168
• /
• 1998

막분리공정에서 분리막 오염은 투과율 감소에 큰 영향을 받는데 그 이유는 주로 막재질의 변질 및 막 표면에서의 농도 분극 현상에 기인하고 분리막의 종류 및 분획분자량의 차이에 따라 막분리 능력이 달라질 수 있다. 본 연구에서는 상용화되어 있는 UF/MF 중공사막에 미치는 막오염 정도와 세정 특성을 알아보았다. 막오염 정도는 막의 Pore size, 소재, 막구조에 따라서 단백질 수용액을 처리하여 막의 오염이 어떻게 일어나는지를 알아보았고 막오염 정도를 검토하기 위하여 초기순수에 대한 흡착후 투과량을 DOF(Degree of fouling)로 정의하였다. 막의 세정특성은 0.1N-NaOH을 사용하여 화학적 세정효과를 확인하였고 초기 순수에 대한 세정후 회복정도를 DOC(Degree of Cleaning)로 정의하였다. 또한 UF막에서 분획분자량별 특성과 MF막에서 소재별/구조적 특성이 DOF와 DOC에 미치는 영향에 대해서 알아보았다.

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.2
• /
• pp.209-213
• /
• 2005

Slow sand filtration processes amended with 5 and 10cm GAC layers at top was compared to same process at bottom in a pilot study for humic substances removal. In case of 5cm GAC layer, the process amended at bottom was superior to the process at top in DOC and UV254nm removal and same trends were observed in case of 10cm GAC layer. Head loss developments of the process GAC at bottom were higher than the process GAC at top so that maintenance of the process GAC at top is easier than the process GAC at bottom.