In this study, carbon fiber/epoxy (CF/EP) composites were interleaved with aramid nonwoven veils with an areal weight density of $8.5g/m^2$ to improve their Mode-I fracture toughness. The control and aramid interleaved CF/EP composite laminates were manufactured by VARTM in a [0]4 configuration. Tensile, three-point bending, compression, interlaminar shear, Charpy impact and Mode-I (DCB) fracture toughness values were determined to evaluate the effects of aramid nonwoven fabrics on the mechanical performance of the CF/EP composites. Thermomechanical behavior of the specimens was investigated by Dynamic Mechanical Analysis (DMA). The results showed that the propagation Mode-I fracture toughness values of CF/EP composites can be significantly improved (by about 72%) using aramid nonwoven fabrics. It was found that the main extrinsic toughening mechanism is aramid microfiber bridging acting behind the crack-tip. The incorporation of these nonwovens also increased interlaminar shear and Charpy impact strength by 10 and 16.5%, respectively. Moreover, it was revealed that the damping ability of the composites increased with the incorporation of aramid nonwoven fabrics in the interlaminar region of composites. On the other hand, they caused a reduction in in-plane mechanical properties due to the reduced carbon fiber volume fraction, increased thickness and void formation in the composites.
Doublesex and mab-3 related transcription factor(dmrt) play crucial roles in sex determination and sex differentiation in vertebrates and invertebrates. Although dmrt genes have been identified in vertebrates, little is known about aquatic invertebrates. In this study, two dmrt genes, namely, Dc_dmrt93B and Dc_dmrt99B, were identified from brackish water flea, Diaphanosoma celebensis. Transcriptional changes were observed in the dmrt genes when the flea was exposed to bisphenol(BP), an endocrine disruptor. Sequence and phylogenetic analyses showed that both dmrt genes contained two conserved domains, namely, DM and DMA, closely clustered with those of Daphnia spp. Additionally, a significant increase in the Dc_dmrt99B mRNA expression level was observed upon exposure to intermediate concentrations of BP (bisphenol A>bisphenol S=bisphenol F, p<0.05), while the expression of Dc_dmrt93B mRNA was slightly modulated. These findings imply that the two dmrt genes may be involved in sex differentiation of D. celebensis. Furthermore, it was found that the ability of BP to modulate dmrt genes could affect development and reproduction. This study provides a basis for understanding the function of the dmrt genes and the molecular mode of action of BP in small crustaceans.
Proceedings of the Korea Water Resources Association Conference
/
2020.06a
/
pp.115-115
/
2020
Water network partitioning (WNP) is an initiative technique to divide the original water distribution network (WDN) into several sub-networks with only sparse connections between them called, District Metered Areas (DMAs). Operating and managing (O&M) WDN through DMAs is bringing many advantages, such as quantification and detection of water leakage, uniform pressure management, isolation from chemical contamination. The research of WNP recently has been highlighted by applying different methods for dividing a network into a specified number of DMAs. However, it is an open question on how to determine the optimal number of DMAs for a given network. In this study, we present a method to divide an original WDN into DMAs (called Clustering) based on community structure algorithm for auto-creation of suitable DMAs. To that aim, many hydraulic properties are taken into consideration to form the appropriate DMAs, in which each DMA is controlled as uniform as possible in terms of pressure, elevation, and water demand. In a second phase, called Sectorization, the flow meters and control valves are optimally placed to divide the DMAs, while minimizing the pressure reduction. To comprehensively evaluate the WNP performance and determine optimal number of DMAs for given WDN, we apply the framework of multiple-criteria decision analysis. The proposed method is demonstrated using a real-life benchmark network and obtained permissible results. The approach is a decision-support scheme for water utilities to make optimal decisions when designing the DMAs of their WDNs.
Proceedings of the Korea Water Resources Association Conference
/
2022.05a
/
pp.395-395
/
2022
본 연구는 머신러닝 기반의 상수도 모니터링 시스템의 예측 모델을 개발하고, 예측 모델의 적용이 가능성을 검토하였다. 상수도모니터링 시스템은 상수관망에 설치된 센서에서 수집된 자료를 모니터링 할 수 있어 운영자의 상수도 시설물의 관리 편의성을 높일 수 있다. 특히 수리학적 모델을 적용하여 계산된 값과 측정된 값을 비교해 이상치가 발생하면 운영자에게 이를 알려주므로 시스템내의 문제점을 빠르게 확인할 수 있다. 그러나 수리학적 모델은 입력자료가 증가됨에 따라 계산시간이 많이 소요되는 문제가 있고, 계산된 값의 정확도가 낮아지므로. 이러한 문제를 보완하기 위해 머신러닝 기반의 예측 모델을 개발하여 이를 해결하고자 하였다. 예측 모델은 GS 이니마 브라질(GS Inima Brazil)에서 운영중인 아라사투바(Aracatuba) 지역 주사라(Jussara) DMA(District Metered Area)의 2018년 1월에서 7월까지의 운영자료를 이용하였으며, 상수도 모니터링 시스템에서 상수관로 수압에 영향을 미치는 영향 인자들을 분석하고, 하이퍼파라미터 최적화를 통한 수압 예측 모델을 개선하였다. 금회 연구는 머신러닝 기반의 모델을 통하여 상수관망의 시간변화에 따른 장래 예측 수압을 검토할 수 있었다는데 큰 의의가 있다.
The use of digital systems in radiation science has been increased last years in the different knowledge areas, as a detectors, spectrometry, spectroscopy, simulation, etc. This manuscript presents the design and implementation of a low-cost, fully portable multi-channel analyzer for nuclear spectrometry (in situ). The development is based on a 32-bit microcontroller with ARM Cortex-M7, this design is able to digitize and analyze pulses from a radiation detector without the need to transform the input signal with some filter, obtains the maximum height of each of the digitized pulses, segmenting the information into channels to form a histogram and visualizing the LCD screen incorporated in the system. A continuous digitization methodology was used, which is in charge of the DMA and an ADC with a resolution of 12 bits at a speed of 3.6 MSPS. The system has a compact design and can open and save spectra in an SD memory built into the system. The MCA in MCU was tested with a NaI(Tl) Scintillation radiation detector, which allowed us to determine that the spectra obtained are similar compared to commercial MCA's. The results obtained show that the MCA in MCU is efficient for nuclear spectrometry, in addition to being very economical and low power consumption.
Journal of Advanced Marine Engineering and Technology
/
v.33
no.8
/
pp.1254-1260
/
2009
CDMA tele-Controller system is designed with a low power consumption 8 bit microcontroller, ATmega 2560. ATmega 2560 microcontroller consists of 4 UART (Universal asynchronous receiver/transmitter) ports, 4 kbytes EEPROM, 256 kbytes flash memory, 4 kbytes SRAM. 4 URAT is used for CDMA modem, communication for GPS module, EEPROM is used for saving a configuration for program running, a flash memory of 256 kbytes is used for storing a F/W(Firm Ware), and SRAM is used for stack, storing memory of global variables while program running. We have tested the communication distance between the coast station and sea by the fabricated control board using 800 MHz CDMA modem and GPS module, which is building for the navigational aid management system by remote control. As a results, the receiving signal strength is above -80 dBm, and then the characteristics of the control board implemented more than 10 km in the distance of the communication.
Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
/
2009.11a
/
pp.149-149
/
2009
본 연구는 고압전력용 중전기기의 몰드절연 및 옥외용 LED의 절연소재는 기기내부에서 발생된 열에너지를 외부로 방사시키는 것이 무엇보다 중요한 것이다. 이런 이유로 고압전력용 전력기기 대부분은 상당한 체적분을 가지고 있기에 초절연을 가지면서 고열전도를 갖는 나노콤포지트를 개발하기위해 에폭시 메트릭스 기반 질화알루미륨의 표면 처리를 실시하여 에폭시 AIN Nanocomposites를 제조하였다. 나노입자의 균질분산은 나노콤포지트 열전도와 초절연성능에 크게 영향을 주게 된다. 이런 소재개발을 위해 에폭시메트릭스에 나노입자의 충진함량을 3wt%로 하였다. 전처리공정을 통하여 에폭시-나노콤포지트에 두 종류의 금속성 coupling agent (Tyzor TE, Tyzor AA-75)를 질화알루미륨 나노입자 표면처리를 건식법으로 실시하였다. 제조된 Epoxy-AIN Nanocomposites의 열적특성과 전기적 특성을 측정하였다. 전기적특성으로 초절연성의 특성인 형상파라미터가 10.93을 그리고 척도파라미터는 176 kV/mm로서 Weibull Plot 누적확률밀도로서(63.2%)의 통계분석된 값을 얻었다. 또한 열적특성 평가를 위해 유리천이온도와 DMA의 온도특성를 조사하였고, 열적.전기적 특성과 나노콤포지트 내부분산(내부 모폴로지:TEM영상)와 연관되어 연구한 결과, 상당히 일치한 결과를 얻을 수 있었다.
Journal of the Institute of Electronics Engineers of Korea TC
/
v.40
no.3
/
pp.1-9
/
2003
We analyze the performances of MC-CDMA and MC-DS/CDMA systems on quasi-synchronized mobile satellite return link. Quasi-synchronization is considered that chip offset between user terminals is within a few chips. Since the transmitted signals of MC-CDMA and MC-DS/CDMA systems have non-constant envelop, they are easily distorted by nonlinearity of transmit amplifier. Since the nonlinear amplifier input signal level of MC-CDMA system using Walsh code to employ frequency domain spreading is lower than that of MC-DS/CDMA system, performance of single user in MC-CDMA system is respectively 2.3dB and 1dB better than that of MC-DS/CDMA system when amplifier input backoff is 0dB and 6dB. However, since interference of MC-DS/CDMA is less than that of MC-CDMA with many subcarriers in quasi-synchronization and AWGN channel, MC-DS/CDMA system is much better than MC-CDMA system as the number of users increases.
Park, Jae-Jun;Kim, Jong-Min;Lee, Dae-Kyoon;Baek, Kwan-Hyun
Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
/
2009.06a
/
pp.255-255
/
2009
에폭시수지에 유기화된 층상실리케이트 나노입자를 충진하여 에폭시-나노콤포지트 제조하였다. 에폭시-나노콤포지트는 열적, 기계적 특성이 매우 우수한 콤포지트로서 실란처리에 따른 동적 기계적 특성 (Dynamic Mechanical Analysis)과 가교밀도와의 관계를 조사였다. 나노입자의 충진함량은 3wt%로 충진하였고, Silane Coupling Agent는 에폭시실란으로서 3-Glycidoxypropyltrimethoxysilane이 사용되었다. 실란처리함량은 0.5, 1, 1.5 wt%로서 적용하여 제조된 샘플이다. DMA Storage modulus특성으로 glass state($40^{\circ}C$)에서는 원형에폭시의 경우 2054, 실란처리되지 않은 나노콤포지트 3967, 실란처리된 나노콤포지트는 4867MPa을 나타내었다. rubbery state($140^{\circ}C$)에서는 원형에폭시의 경우 1458, 실란처리되지 않은 경우 2506, 실란처리된 나노콤포지트는 2638MPa을 나타내었다. 또한 실란처리함량에따른 가교밀도변화는 0.5wt%에서는 0.803, 1 wt%에서는 0.671, 1.5wt%에서는 $0.762[mol/cm^3]$이로서 에폭시원형과 실란미처리된 나노콤포지트 그리고 실란처리된 나노콤포지트순으로 glass state와 rubbery state에서의 특성이 크게 향상된 결과를 얻었다. 이는 실란이 고분자와 무기물사이의 결합력을 강화시켜 열적기계적 특성향상을 가져 오는 것으로 볼 수 있다. 가교밀도의 실란처리함량의 변화에 있어서 과량의 함량 첨가는 에폭시와 나노층상실리게이트 표면처리된 잔유량이 오히려 특성의 저하를 가져오는 것으로 볼 수 있다.
Journal of Korean Society for Atmospheric Environment
/
v.15
no.4
/
pp.403-415
/
1999
To properly assess air pollution levels, application of quality assurance and quality control(QA/QC) is believed to be an essential step. In order to cope with such scientific principle, a field study was designed with an aim of comparing: 1) the methods of calibration for airborne pollutants and 2) the protocols developed for their measurements. Measurements were made at Han Yang University, Seoul during 29 May through 1 June 1998 under the management of the Division of Measurements and Analysis(DMA) of Korean Society for Atmospheric Environment(KOSAE). In this work, we report our results of intercomparative measurements on several gaseous criteria pollutants that were investigated mainly by the two institutes-Seoul National University(SNU) and the Korean Research Institute for Standards and Science(KRISS). Although measurements of major gaseous pollutants had been made routinely by many scientific institutes and organizations in Korea, most scientists involved in those studieswere obliged to do their experiments on the basis of their own procedural steps spaning from the preparation of gaseous standards to the methodological selections for the calibration. Hence, this campaign offered a unique opportunity to examine many important aspects on the measurements of these important gaseous pollutants. In the course of our study, we investigated the compatibility of data sets obtained by the two institutes in concert with reference data sets collected concurrently from a government-managed monitoring station. On the basis of our study, we conclude that different data sets made by different participants during this campaign agree well within the reasonable range of uncertainties.low, which indicated that during this period the potential acidity of precipitation was high but the neutralizing capacity was low. For Spring, pAi was very low but pH was slightly high. This was likely due to the large amount of $CaCO_3$ in the soil particles transported over a long range from the Chinese continent that were incorporated into the precipitation, and then neutralized the acidifying species with its high concentraton.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.