• Journal of The Korean Society of Grassland and Forage Science
• /
• v.43 no.3
• /
• pp.129-137
• /
• 2023

Corn silage is extensively utilized in ruminant feeding on a global scale, with substantial research efforts directed towards enhancing its nutritional worth and managing moisture content. The purpose of this study was to assess the impact of normal cutting height and elevated cutting height on whole-crop corn silage. Corn was harvested at heights of 15 cm and 45 cm above the ground, respectively, 45 days after heading. The harvested corn was cut into 2-3 cm lengths and packed into 20-liter plastic silos in triplicate. The results showed that dry matter (DM), crude protein (CP), water soluble carbohydrates (WSC), and in vitro dry matter digestibility (IVDMD) of C45 were significantly higher than those of the control, while the neutral detergent fiber (NDF) was significantly lower in C45 (p<0.05). The C15 had higher yields than C45 (p<0.05). There was no significant difference in the total digestible nutrients (TDN) yield of whole-crop corn silage. The increase in cutting height resulted in a larger change in moisture content and NDF per centimeter. After 60 days-ensiling, C45 showed significantly lower NH₃-N concentrations. Moreover, C45 had significantly higher lactic acid concentration, lactic acid/acetic acid ratio, and lactic acid bacteria count compared to the control. Mold was not detected and the yeast count was less than 2 log10 cfu/g fresh matter in both control and C45. In summary, C45 improved the feeding value and fermentation quality of whole-crop corn silage at the expense of forage productivity.

• Asian-Australasian Journal of Animal Sciences
• /
• v.2 no.4
• /
• pp.615-623
• /
• 1989

Three sheep fitted with rumen cannulae and abomasal cannulae were given daily 750 g (DM) of three diets consisting of straw-manure silage and barley mixture in the ratios of 75:25, 50:50 and 25:75. As the proportion of barley in the diet increased, there was an increase in the amount of OM apparently digested in the rumen and thole tract (P<.01). But ADF digestion was decreased. For the 25:75 diet the $NH_3-N$ content in the rumen showed the highest value, but the total VFA was the lowest. The rumen volume and dilution rate increased with increasing ratio of silage in diets. There were no significant differences between diets in abomasal NAN flow, and the bacterial-N for the 25:75 diet was 7.3 g N as compared with 9.2-9.6 g N for the other diets (P<.01). Rates of bacterial nitrogen synthesis in the rumen were 30.5, 24.1 and 14.9 g N per Kg OM apparently digested in the rumen for the 75:25, 50:50 and 25:75 diets, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.11
• /
• pp.1595-1600
• /
• 2011

Sugarcane press residue (SPR), a byproduct from the sugar industry was evaluated for it's nutrient and energetic quality in broilers and layers. The composition of SPR included (% DM): CP-11.76 (methionine-2.21, cystine-1.05, lysine-4.85, threonine-5.48% of CP), EE-7.87 (palmitic acid-30.3, stearic acid-4.1, oleic aicd-17.2, linoleic acid-38.0, linolenic acid-5.4% of EE), CF-10.08, TA-21.08 (Ca-3.87, P-1.10, Mg-0.95%, Fe-3500, Mn-284, Zn-113, Cu-61.5, Co-5.0 ppm and AIA-4.93%) and NFE-48.35% indicating that SPR is a valuable source of both organic and inorganic nutrients for poultry. The metabolic trials revealed the average ME of SPR as 749, 842 and 1,270 kcal/kg, respectively in broilers and 844, 936 and 1,031 kcal/kg in layers, at 10, 20 and 30% inclusion levels, respectively. Further, the fortification of SPR incorporated diets with biotechnological products viz., lipid utilizing agents (lipase and lecithin) or NSP degrading enzymes and their combination did not improve the ME content of such diets.

• Journal of the Korean Ceramic Society
• /
• v.31 no.8
• /
• pp.934-940
• /
• 1994

Fibers of ZrO2-SiO2 system were prepared from the hydrolysis and condensation of Si(OC2H5)4 and Zr(OnC3H7)4 with different H2O/alkoxide molar ratios. It was found that fibers could be drawn in the viscosity range of 1~100 poise from HCl catalyzed solutions with lower water contents of the mole ratio H2O/alkoxide, r 2. The fibrous gels were converted into the corresponding oxide glass fibers by heating at 80$0^{\circ}C$. Mechanical test was performed on E, A and 20ZrO2-80SiO2 glass fibers reinforced cement in order to investigate the flexural strength. The flexural strength value of 20ZrO2-80SiO2 glass fibers reinforced cement was greater than those of E and A. The chemical durability of the fibers in alkaline solutions increased with ZrO2 content. The weight loss due to the corrosion by 2N-NaOH solutions at $25^{\circ}C$ for 160 hours was about 0.31$\times$10-2 mg/dm2 for the 20ZrO2-80SiO2 glass fibers, which was superior to that of Vycor glass.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.3
• /
• pp.239-244
• /
• 1998

Dried carrot meal (DCM) prepared from fresh carrot was found to be a good source of xanthophyll (54 mg/kg) and morderate source of protein (188.3 g/kg) and energy (2,510 kcal/kg) with low level of fibre (80 g/kg). DM, EE and NFE content of DCM were 895, 35 and 661.7 g/kg respectively. The ingredient was used in laying hen diet to evaluate its pigmenting value for egg yolk. Thirty-two laying hens from Starcross strain were divided into four groups and fed four different diets: a control diet containing 62% ground wheat, a corn-based diet (50% ground yellow corn), control + 4% DCM and control + 8% DCM. Use of DCM at 8% level in layer mash significantly improved yolk colour at 3rd, 6th and 9th week of supplementation in comparison with wheat-based control diet. This improvement was statististically similar to that obtained from yellow corn-based diet. DCM at 4% level also improved yolk colour score. Wheat-based diet significantly increased feed consumption compared to yellow corn and diet supplied with 8% DCM. Body weight gain, egg production, feed conversion were not significantly affected due to dietary addition of DCM and no mortality was observed during 63-day experimental period. Further works on DCM are suggested.

• Asian-Australasian Journal of Animal Sciences
• /
• v.7 no.3
• /
• pp.413-419
• /
• 1994

Mold growth decreased nutritive value of wheat straw (WS). Mold increased DM (94 vs 98%) and ADF (51 vs 56%) contents and had no effect on natural detergent fiber (NDF). Crude protein and N values were decreased in moldy wheat straw, Mold increased insoluble N content of wheat straw (WS) from 21 to 27%. Ammoniation increased the CP of nonmoldy straw from 3.8 to 8.3% and moldy straw from (3.3 to 6.2%). Aspergillus and zygomycetes fungal species were most prevalent and total numbers were higher on moldy straw. Ammoniation decreased total numbers of fungal spores on nonmoldy and moldy WS. Ammoniation of moldy WS increased (p < 0.10) feed in take (1.8%) as compared with nonmoldy, ammoniated, nonmoldy and moldy WS. Steers fed moldy WS had lowest (p < 0.10) feed intake (1.3% of BW daily) compared with other diet. There was little difference (p < 0.10) in intake of nonammoniated vs. ammoniated WS. Steers fed moldy straw lost 6 kg BW. Ammoniated, nonmoldy straw elevated Blood Urea Nitrogen (BUN) (10.5 mg/dl). Alkaline Phosphatase (ALK) was greater in steers fed moldy VS nonmoldy straw (148 VS 95 U/liter. p < 0.10).

• Journal of the Korean institute of surface engineering
• /
• v.23 no.1
• /
• pp.34-43
• /
• 1990

Al-Si piston alloys such as AlS10CuMg have been anodized to examine apossibility of forming a hard film aat relatively higher temperatures compard with those in conventional sulfuric acid processes. Three types of electrolytes have been employed in this study ; electrolyte A(15% H2SO4, $0^{\circ}C$), electrolyte B(12% H2SO4, 1% oxalic, $10^{\circ}C$), electrolyte C(tartaric acid 125g/L+oxalic 75g/L+aluminum sulfate 225g/L, $25^{\circ}C$). Hard anodisine process in electrolyte B at a current density of 1.54A/dm2 produced a harder film of VHN 396 at a relatibely low film forming voltage compared with those obtained in other electrolyte at equivalent current density. A liner relationship between hardness and abrasion resistance exists for Al-Si piston alloys. The hardness of anodized film decreasees with increasing silicon content in Al-Si alloys and also with bath temperature. The film hardeness of Na-modified alloy os higher than that of P-modified alloy due to its finer microstructre. The film on the silicon phase in Al-Si alloys is observed to be formed by lateral growth of oxide film nucleated at surroundings.

• Journal of Animal Environmental Science
• /
• v.5 no.1
• /
• pp.63-72
• /
• 1999

This study was carried out to improve utilization of fly ash. Each animal waste was mixed with fly ash and composted This compost used at forage crops with corn, rye and alfalfa to examine to examine the fertilized efficiency and investigated productivity of forage crops, composition of this copmost and effect of fly ash on soil characteristics and composition. Content of organic matte, P2O5, K2O, CaO, MgO, Mn and B at the soil, which is given fly ash, increased. After the test crops were harvested, pH of the soil was maintained about 7 and contents of organic matter, phosphoric aicd, K, Mg, and B was increased at the soil of used fly ash. As fly ash was mixed, each DM yield of corn and rye was increased 10∼13% and 14∼21% especially alfalfa was increased 35% at the soil which is mixed fly ash with cage layer manure. As fly ash was mixed, each Crude protein (CP) of corn and rye was increased 6∼17% and about 29%, especially, as fly and cage layer manure was mixed CP of alfalfa was increased 33%. In conclusion, as fly ash is mixed with anlmal waste and use at forage crops, It makes the soil good and improve the productivity of forage crops.

• Journal of the Korean Ceramic Society
• /
• v.33 no.1
• /
• pp.7-16
• /
• 1996

${CO_3}^{2-}$ containing whisker-like hydroxyapatite powders were synthesized byhomogeneous precipitation method using urea, Dicalcium phosphate anhdrate[DCPA; $CaHPO_4$] and octacalcium phosphate [OCP; $Ca_8H_2(PO_4_)6\cdot5H_20$]were obtained as precursors and they transformed to high crystalline hydroxyapatites at pH 5.62, and 6.54 respectively. According to the condition of the final pH in the solutions for the solution products and urea contents OCP was remained. When the solution product of $Ca^{2-}$ and ${PO_4}^{3-}$ was $1.5\times 10^4$[$mM^2$] and the content of urea was 0.25 mol.$dm^{-3}$ well crystallized whisker-like hydroxyapatite tens of micrometer in length was obtained. By heat treatment DCPA and OCP were decomposed into $\beta$-tricalcium phosphate [$\beta$-TCP ; $\beta$-$Ca_3{PO_4}_2$] and $\beta$-dicalcium phosphate [$\beta$-DCP ;$\beta$-$Ca_2P_2O_4}_2$]. And well-crystallized hydroxyapatite was partially decomposed into $\beta$-TCP at $800^{\circ}C$.

• Korean Journal of Materials Research
• /
• v.18 no.3
• /
• pp.117-122
• /
• 2008

Micro-sized bumps on a multi-layered build-up PCB were fabricated by pulse-reverse copper electroplating. The values of the current density and brightener content for the electroplating were optimized for suitable performance with maximum efficiency. The micro-bumps thus electroplated were characterized using a range of analytical tools that included an optical microscope, a scanning electron microscope, an atomic force microscope and a hydraulic bulge tester. The optical microscope and scanning electron microscope analyses results showed that the uniformity of the electroplating was viable in the current density range of $2-4\;A/dm^2$; however, the uniformity was slightly degraded as the current density increased. To study the effect of the brightener concentration, the concentration was varied from zero to 1.2 ml/L. The optimum concentration for micro-bump electroplating was found to be 0.6 ml/L based on an examination of the electroplating properties, including the roughness, yield strength and grain size.